Fairchild FSAV330QSC Low on resistance quad spdt wide bandwidth video switch Datasheet

Revised July 2005
FSAV330
4 Channel 2:1 Video Switch
General Description
The Fairchild Video Switch FSAV330 is a quad single pole/
double throw high-speed CMOS TTL-compatible video
switch. The low On Resistance of the switch allows inputs
to be connected to outputs without adding propagation
delay or generating additional ground bounce noise.
When OE is LOW, the select pin connects the A Port to the
selected B Port output. When OE is HIGH, the switch is
OPEN and a high-impedance state exists between the two
ports.
Features
O Replacement for the P15V330
O Wide bandwidth 300 MHz
O 4: switch connection between two ports
O Minimal propagation delay through the switch
O Low lCC
O Zero bounce in flow-through mode
O Control inputs compatible with TTL level
Applications
• Set Top Boxes
• Flat Panel Displays
• CRT Displays
• DVD - RW
Ordering Code:
Order Number
FSAV330M
Package
Package Description
Number
M16A
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
FSAV330QSC
MQA16A
16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide
FSAV330QSCX_NL
(Note 1)
MQA16A
Pb-Free 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide
FSAV330MTC
MTC16
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
FSAV330MTCX_NL
(Note 1)
MTC16
Pb-Free 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm
Wide
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Note 1: “_NL” indicates Pb-Free package (per JEDEC J-STD-020B). Device available in Tape and Reel only.
© 2005 Fairchild Semiconductor Corporation
DS500704
www.fairchildsemi.com
FSAV330 4 Channel 2:1 Video Switch
April 2002
FSAV330
Logic Diagram
Connection Diagram
Pin Descriptions
Truth Table
Pin Name
Description
OE
Bus Switch Enable
S
Select Input
S
OE
Function
X
H
Disconnect
L
A
B1
L
A
B2
A
Bus A
L
B1–B2
Bus B
H
www.fairchildsemi.com
2
0.5V to 7.0V
0.5V to 7.0V
0.5V to 7.0V
50 mA
Supply Voltage (VCC )
DC Switch Voltage (VS)
DC Input Voltage (VIN) (Note 3)
DC Input Diode Current (lIK) VIN 0V
DC Output (IOUT) Sink Current
DC VCC /GND Current (ICC /IGND)
Storage Temperature Range (TSTG)
Recommended Operating
Conditions (Note 4)
Power Supply Operating (VCC)
128 mA
4.0V to 5.5V
Input Voltage (VIN)
0V to 5.5V
Output Voltage (VOUT)
0V to 5.5V
Input Rise and Fall Time (tr, tf)
/ 100 mA
65qC to 150 qC
Switch Control Input
0 ns/V to 5 ns/V
Switch I/O
ESD
0 ns/V to DC
40 qC to 85 qC
Free Air Operating Temperature (TA)
Human Body Model
4000V
Note 2: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The Recommended Operating Conditions tables will define the conditions
for actual device operation.
Note 3: The input and output negative voltage ratings may be exceeded if
the input and output diode current ratings are observed.
Note 4: Unused control inputs must be held HIGH or LOW. They may not
float.
DC Electrical Characteristics
Symbol
Parameter
40 qC to 85 qC
TA
VCC
(V)
Min
0
Typ
(Note 5)
Max
Units
2.0
V
Conditions
Analog Signal Range
5
VIK
Clamp Diode Voltage
4.5
VIH
HIGH Level Input Voltage
4.0–5.5
VIL
LOW Level Input Voltage
4.0–5.5
0.8
V
II
Input Leakage Current
5.5
r1.0
PA
0 d VIN d 5.5V
IOFF
OFF-STATE Leakage Current
5.5
r1.0
PA
0 d A, B d VCC
RON
Switch On Resistance
7
:
1.2
2.0
4.5
(Note 6)
V
IIN
18 mA
V
3
VIN
RI
VIN
1.0V
75 :, ION
13 mA
2.0V
10
:
ICC
Quiescent Supply Current
5.5
3
PA
VIN
' ICC
Increase in ICC per Input
5.5
2.5
mA
One Input at 3.4V
4.5
7
RI
75 :, ION
26 mA
VCC or GND, IOUT
0
Other Inputs at VCC or GND
Note 5: Typical values are at VCC
5.0V and TA
25qC
Note 6: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the
voltages on the two (A or B) pins.
3
www.fairchildsemi.com
FSAV330
Absolute Maximum Ratings(Note 2)
FSAV330
AC Electrical Characteristics
40 qC to 85qC,
TA
Symbol
CL
Parameter
VCC
Min
tPZH, tPZL
tPHZ, tPLZ
20 pF, RU
Typ
75:
VCC
Max
Min
Units
Number
Max
5.2
5.7
Output Enable Time, OE to Bus A, B
5.1
5.6
Output Disable Time, Select to Bus B
5.2
5.5
ns
5.5
OE to Bus A, B
3 dB Bandwidth
5.5
300
58
Crosstalk
VI
7V for tPZL
VI
OPEN for tPZH
VI
7V for tPLZ
ns
VI
OPEN for tPHZ
MHz
RL
150:,
TA
25qC
(Note 7)
XTALK
dB
RIN
RL
Differential Gain
DG
0.64
%
RL
f
Differential Phase
DP
0.1
Deg.
RL
f
60
Off Isolation
OIRR
Figure
Conditions
4.0V
Output Enable Time, Select to Bus B
Output Disable Time, Output Enable Time
BW
RD
4.5 – 5.5V
dB
RL
10:,
150:, 10 MHz
150:,
3.58 MHz
150:,
3.58 MHz
150:,
10 MHz
Note 7: This parameter is determined by device characterization but is not product tested.
Capacitance
Symbol
Parameter
CIN
CI/O
Typ
Control Pin Input Capacitance
A Port
B Port
Input/Output Capacitance
Switch On Capacitance
CON
Note 8: TA
(Note 8)
25qC, f
1 MHz, Capacitance is characterized but not tested.
www.fairchildsemi.com
4
Max
Units
3
pF
7
pF
5
pF
12
pF
Conditions
VCC
5.0V
VCC, OE
VCC
5.0V
5.0V, OE
0.0V
Figures
1, 2
Figures
1, 2
FSAV330
AC Loading and Waveforms
Note: Input driven by 50 : source terminated in 50 :
Note: C L includes load and stray capacitance
Note: Input PRR
1.0 MHz, tW
500 ns
FIGURE 1. AC Test Circuit
FIGURE 2. AC Waveforms
5
www.fairchildsemi.com
FSAV330
Physical Dimensions inches (millimeters) unless otherwise noted
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Package Number M16A
www.fairchildsemi.com
6
FSAV330
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide
Package Number MQA16A
7
www.fairchildsemi.com
FSAV330 4 Channel 2:1 Video Switch
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC16
Technology Description
The Fairchild Switch family derives from and embodies Fairchild’s proven switch technology used for several years in its
74LVX3L384 (FST3384) bus switch product.
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
8
Similar pages