Fairchild FSBH0170ANY Green mode fairchild power switch (fpsâ ¢) Datasheet

FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370
Green Mode Fairchild Power Switch (FPS™)
Features
Description
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
The highly integrated FSBH-series consists of an
integrated current-mode Pulse Width Modulator (PWM)
and an avalanche-rugged 700V SenseFET. It is
specifically designed for high-performance offline
Switch Mode Power Supplies (SMPS) with minimal
external components.
Brownout Protection with Hysteresis
Built-In 5ms Soft-Start Function
Internal Avalanche-Rugged 700V SenseFET
No Acoustic Noise During Light-Load Operation
High-Voltage Startup
Linearly Decreasing PWM Frequency to 18KHz
Peak-Current-Mode Control
Cycle-by-Cycle Current Limiting
Leading-Edge Blanking (LEB)
Synchronized Slope Compensation
Internal Open-Loop Protection
VDD Under-Voltage Lockout (UVLO)
VDD Over-Voltage Protection (OVP)
Internal Auto-Restart Circuit (OVP, OTP)
Constant Power Limit (Full AC Input Range)
Internal OTP Sensor with Hysteresis
VIN Pin for Pull-HIGH Latch Function and PullLOW Auto-Recovery Protection
Applications
General-purpose switch-mode power supplies and
flyback power converters, including:
ƒ
ƒ
Auxiliary Power Supply for PC and Server
ƒ
Adapter for Camcorder
SMPS for VCR, SVR, STB, DVD & DVCD Player,
Printer, Facsimile, and Scanner
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
The integrated PWM controller features include a
proprietary green-mode function that provides off-time
modulation to linearly decrease the switching frequency
at light-load conditions to minimize standby power
consumption. To avoid acoustic-noise problems, the
minimum PWM frequency is set above 18kHz. This
green-mode function enables the power supply to meet
international power conservation requirements. The
PWM controller is manufactured using the BiCMOS
process to further reduce power consumption. The
FSBH-series turns off some internal circuits to improve
power saving when VFB is lower than 1.6V, which allows
an operating current of only 2.5mA.
The FSBH-series has built-in synchronized slope
compensation to achieve stable peak-current-mode
control. The proprietary external line compensation
ensures constant output power limit over a wide AC
input voltage range, from 90VAC to 264VAC.
The FSBH-series provides many protection functions. In
addition to cycle-by-cycle current limiting, the internal
open-loop protection circuit ensures safety when an
open-loop or output short occurs. PWM output is
disabled until VDD drops below the VTH-OLP, then the
controller starts up again. As long as VDD exceeds 28V,
the internal OVP circuit is triggered.
Compared with a discrete MOSFET and controller or
RCC switching converter solution, the FSBH-series
reduces total component count, design size, and
weight; while increasing efficiency, productivity, and
system reliability. These devices provide a basic
platform that is well suited for the design of costeffective flyback converters, such as in PC auxiliary
power supplies.
www.fairchildsemi.com
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
September 2009
Part Number Sense FET
Operating
Temperature Range
FSBH0F70ANY
0.5A 700V
-40°C to +105°C
FSBH0170ANY
1.0A 700V
-40°C to +105°C
FSBH0270ANY
2.0A 700V
-40°C to +105°C
FSBH0170NY
1.0A 700V
-40°C to +105°C
FSBH0270NY
2.0A 700V
-40°C to +105°C
FSBH0370NY
3.0A 700V
-40°C to +105°C
VIN Pin
(PIN #4)
Packing
Method
Eco Status Package
Not Available
Green
Enabled
8-Pin Dual
In-Line
Package
(DIP)
Tube
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Application Diagram
HV
Drain
VIN
FB
VDD
GND
Figure 1. Typical Flyback Application
Output Power Table (1)
(2)
230VAC ± 15%
Product
(3)
Adapter
85-265VAC
(4)
Open Frame
(3)
Adapter
(4)
Open Frame
FSBH0F70A
7W
10W
6W
8W
FSBH0170/A
10W
15W
9W
13W
FSBH0270/A
14W
20W
11W
16W
FSBH0370
17.5W
25W
13W
19W
Notes:
1. The maximum output power can be limited by junction temperature.
2. 230 VAC or 100/115 VAC with doublers.
3. Typical continuous power in a non-ventilated enclosed adapter with sufficient drain pattern as a heat sink at
50°C ambient.
4. Maximum practical continuous power in an open-frame design with sufficient drain pattern as a heat sink at
50°C ambient.
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
2
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Ordering Information
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 Green — Mode Fairchild Power Switch (FPS™)
Internal Block Diagrams
Figure 2.
FSBH0170, FSBH0270, FSBH0370 Internal Block Diagram
Figure 3. FSBH0F70A, FSBH0170A, FSBH0270A Internal Block Diagram
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
3
8
F – Fairchild Logo
Z – Plant Code
X – 1-Digit Year Code
Y – 1-Digit Week Code
TT – 2-Digit Die Run Code
T – Package Type (N:DIP)
P – Y: Green Package
M – Manufacture Flow Code
8
ZXYTT
BH0F70A
TPM
ZXYTT
BH0170A
TPM
1
1
8
8
ZXYTT
BH0270A
TPM
ZXYTT
BH0170
TPM
1
1
8
8
ZXYTT
BH0270
TPM
ZXYTT
BH0370
TPM
1
1
Figure 4. Pin Configuration and Top Mark Information
Pin Definitions
Pin #
Name
1
GND
Ground. SenseFET source terminal on primary side and internal controller ground.
2
VDD
Power Supply. The internal protection circuit disables PWM output as long as VDD exceeds the
OVP trigger point.
3
FB
Feedback. The signal from the external compensation circuit is fed into this pin. The PWM duty
cycle is determined in response to the signal on this pin and the internal current-sense signal.
VIN
Line-Voltage Detection. The line-voltage detection is used for brownout protection with
hysteresis and constant output power limit over universal AC input range. This pin has additional
protections that are pull-HIGH latch and pull-LOW auto recovery, depending on the application.
NC
No Connection for FSBH0F70A, FSBH0170A and FSBH0270A.
5
HV
Startup. For startup, this pin is pulled HIGH to the line input or bulk capacitor via resistors.
6
Drain
SenseFET Drain. High-voltage power SenseFET drain connection.
7
Drain
SenseFET Drain. High-voltage power SenseFET drain connection.
8
Drain
SenseFET Drain. High-voltage power SenseFET drain connection.
4
Description
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
4
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Pin Configuration
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
VDRAIN
IDM
Parameter
Drain Pin Voltage
Min.
(5,6)
Drain Current Pulsed
FSBH0x70/A
(7)
(8)
Max.
Unit
700
V
FSBH0F70A
1.5
FSBH0170/A
4.0
FSBH0270/A
8.0
FSBH0370
12.0
FSBH0F70A
10
FSBH0170/A
50
FSBH0270/A
140
FSBH0370
230
EAS
Single Pulsed Avalanche Energy
VDD
DC Supply Voltage
VFB
FB Pin Input Voltage
-0.3
-0.3
A
mJ
30
V
7.0
V
VIN
VIN Pin Input Voltage
7.0
V
VHV
HV Pin Input Voltage
700
V
PD
Power Dissipation (TA<50°C)
1.5
W
θJA
Junction-to-Air Thermal Resistance
80
°C/W
θJC
Junction-to-Case Thermal Resistance
20
°C/W
TJ
Operating Junction Temperature
Internally limited
°C
Storage Temperature Range
-55
+150
°C
+260
°C
TSTG
TL
ESD
Lead Temperature (Wave Soldering or IR, 10 Seconds)
Electrostatic Discharge Capability,
All pins except HV pin
Human Body Model:
JESD22-A114
3
Charged Device Model:
JESD22-C101
1
kV
Notes:
5. All voltage values, except differential voltages, are given with respect to the network ground terminal.
6. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
7. Non-repetitive rating: pulse width is limited by maximum junction temperature.
8. L = 51mH, starting TJ = 25°C.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
TA
Parameter
Conditions
Operating Ambient Temperature
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
Min.
-40
Typ.
Max.
Unit
+105
°C
www.fairchildsemi.com
5
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Absolute Maximum Ratings
VDD=15V and TA=25°C unless otherwise specified.
Symbol
Parameter
SenseFET Section
Condition
Min.
VDS = 700V, VGS = 0V
700
BVDSS
Drain-Source
Breakdown Voltage
IDSS
Zero-Gate-Voltage
Drain Current
FSBH0x70/A
CISS
COSS
FSBH0x70/A
VDS = 560V, VGS = 0V,
TC = 125°C
200
Drain-Source On(10)
State Resistance
Input Capacitance
Output Capacitance
Reverse Transfer
Capacitance
Turn-On Delay Time
19.00
8.80
11.00
6.00
7.20
FSBH0370
4.00
4.75
FSBH0F70A
162
211
250
325
550
715
FSBH0370
315
410
FSBH0F70A
18
24
25
33
38
50
47
61
FSBH0170/A
FSBH0270/A
FSBH0170/A
FSBH0270/A
FSBH0170/A
FSBH0270/A
VGS = 10V, ID = 0.5A
VGS = 0V, VDS = 25V,
f = 1MHz
VGS = 0V, VDS = 25V,
f = 1MHz
FSBH0F70A
3.8
5.7
FSBH0170/A
10.0
15.0
17.0
26.0
9.0
24.0
FSBH0270/A
VGS = 0V, VDS = 25V,
f = 1MHz
FSBH0F70A
9.5
29.0
FSBH0170/A
12.0
34.0
20.0
500.0
11.2
33.0
19
48
4
18
15
40
34
78
FSBH0270/A
VDS = 350V, ID = 1.0A
FSBH0370
FSBH0F70A
tR
Rise Time
FSBH0170/A
FSBH0270/A
VDS = 350V, ID = 1.0A
FSBH0370
FSBH0F70A
tD(OFF)
Turn-Off Delay Time
FSBH0170/A
FSBH0270/A
33.0
VDS = 350V, ID = 1.0A
FSBH0370
tF
Fall Time
μA
14.00
FSBH0370
tD(ON)
Unit
V
50
FSBH0370
CRSS
Max.
VDS = 700V, VGS = 0V
FSBH0F70A
RDS(ON)
Typ.
(9)
30.0
70.0
550.0
120.0
28.2
67.0
42
94
FSBH0170/A
10
30
25
60
32
74
VDS = 350V, ID = 1.0A
FSBH0370
pF
pF
pF
ns
ns
760.0
FSBH0F70A
FSBH0270/A
Ω
ns
ns
Continued on the following page…
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
6
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Electrical Characteristics
VDD=15V and TA=25°C unless otherwise specified.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Unit
Control Section
VDD Section
VDD-ON
Start Threshold Voltage
11
12
13
V
VDD-OFF
Minimum Operating Voltage
7
8
9
V
IDD-ST
Startup Current
FSBH0170
FSBH0270
FSBH0370
VDD-ON – 0.16V
FSBH0F70A
FSBH0170A
FSBH0270A
VDD-ON – 0.16V
240
320
400
30
µA
IDD-OP
Operating Supply Current
VDD=15V, VFB=3V
3.0
3.5
4.0
mA
IDD-ZDC
Operating Current for VFB<VFB-ZDC
VDD=12V, VFB=1.6V
1.5
2.5
3.5
mA
VTH-OLP+0.1V
IDD-OLP
Internal Sink Current
30
70
90
µA
VTH-OLP
IDD-OLP Off Voltage
5
6
7
V
VDD-OVP
VDD Over-Voltage Protection
27
28
29
V
VDD Over-Voltage Protection Debounce
Time
75
130
200
µs
1.5
3.5
5.0
mA
1
20
µA
94
100
106
kHz
14
18
22
kHz
tD-VDD-OVP
HV Section
IHV
IHV-LC
Maximum Current Drawn from HV Pin
HV 120VDC,
VDD=0V with 10µF
Leakage Current after Startup
HV=700V,
VDD=VDD-OFF+1V
Oscillator Section
fOSC
Frequency in Nominal Mode
fOSC-G
Green-Mode Frequency
DMAX
Maximum Duty Cycle
Center Frequency
85
%
fDV
Frequency Variation vs. VDD Deviation
VDD=11V to 22V
5
%
fDT
Frequency Variation vs. Temperature
(9)
Deviation
TA= -25 to 85°C
5
%
VIN Section (FSBH0170, FSBH0270, FSBH0370)
VIN-ON
PWM Turn-On Threshold Voltage
1.08
1.13
1.18
V
VIN-OFF
PWM Turn-Off Threshold Voltage
VIN-ON –
0.48
VIN-ON –
0.60
V
tIN-OFF
PWM Turn-Off Debounce Time
VIN-ON –
0.54
500
4.4
4.7
5.0
VIN-H
Pull-HIGH Latch Trigger Level
tIN-H
Pull-HIGH Latch Debounce Time
VIN-L
Pull-LOW Auto-Recovery Trigger Level
ms
100
V
µs
0.2
0.3
0.4
V
1/4.5
1/4.0
1/3.5
V/V
7
kΩ
Feedback Input Section
AV
FB Voltage to Current-Sense
Attenuation
ZFB
Input Impedance
4
Continued on the following page…
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
7
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Electrical Characteristics (Continued)
VDD=15V and TA=25°C unless otherwise specified.
Symbol
VFB-OPEN
Parameter
Condition
Output High Voltage
FB Pin Open
Min.
Typ.
Max.
5.5
Unit
V
VFB-N
Green-Mode Entry FB Voltage
2.3
2.5
2.7
V
VFB-G
Green-Mode Ending FB Voltage
1.9
2.0
2.1
V
VFB-ZDC
VFB-OLP
tD-OLP
Zero Duty Cycle FB Voltage
FB Open-Loop
Trigger Level
tSS
V
5.2
5.4
5.6
V
FSBH0x70/A
4.4
4.6
4.8
V
50
56
59
ms
FB Open-Loop Protection Delay
Current-Sense Section
ILIM
1.6
FSBH0F70A
(13)
Peak Current Limit
FSBH0F70A
VIN Open
0.63
0.73
0.83
FSBH0170/A
VIN=1.2V / VIN Open
0.70
0.80
0.90
FSBH0270/A
VIN=1.2V / VIN Open
0.90
1.00
1.10
FSBH0370
VIN=1.2V
1.10
1.20
1.30
4.5
5.0
5.5
(9)
Period During Soft-Start Time
A
ms
Constant Power Limit (FSBH0170, FSBH0270, FSBH0370)
VLMT1
Threshold Voltage 1 for Current Limit
VIN=1.2V
0.73
0.80
0.87
V
VLMT2
Threshold Voltage 2 for Current Limit
VIN=3.6V
0.56
0.63
0.70
V
FSBH0F70A
0.97
1.00
1.03
V
FSBH0170A/0270A
0.77
0.80
0.83
V
+142
+150
°C
Current Limit (FSBH0F70A, FSBH0170A, FSBH0270A)
VLMT
Threshold Voltage for Current Limit
Over-Temperature Protection Section (OTP)
TOTP
TRESTART
Protection Junction Temperature
Restart Junction Temperature
(9, 11)
+135
(9, 12)
TOTP-25
°C
Notes:
9. These parameters, although guaranteed, are not 100% tested in production.
10. Pulse test: pulse width ≤ 300μs, duty ≤ 2%.
11. When activated, the output is disabled and the latch is turned off.
12. The threshold temperature for enabling the output again and resetting the latch after over-temperature
protection has been activated.
13. These parameters, although guaranteed, are tested in wafer process.
PWM Frequency
fOSC
fOSC-G
VFB-ZDC VFB-G
VFB-N
VFB
Figure 5. VFB vs. PWM Frequency
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
8
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Electrical Characteristics (Continued)
14
3.02
12
3.00
2.98
2.96
IDD-OP(µA)
IDD-ST(µA)
10
8
6
2.94
2.92
4
2.90
2
2.88
0
2.86
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
5
20
Temperature(°C)
12.4
8.3
12.2
8.2
12.0
8.1
11.8
11.6
11.4
65
80
95
110
125
95
110
125
95
110
125
95
110
125
8.0
7.9
7.8
11.2
7.7
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
5
20
Temperature(°C)
Figure 8.
35
50
65
80
Temperature(°C)
VDD-ON vs. Temperature
Figure 9. VDD-OFF vs. Temperature
6.6
28.42
6.4
28.41
6.2
28.40
V DD-OVP(V)
V TH-OLP(V)
50
Figure 7. IDD-OP vs. Temperature
V DD-OFF (V)
V DD-ON (V)
Figure 6. IDD-ST vs. Temperature
6.0
5.8
5.6
28.39
28.38
28.37
5.4
28.36
5.2
5.0
28.35
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
5
20
Temperature(°C)
Figure 10.
35
50
65
80
Temperature(°C)
VTH-OLP vs. Temperature
Figure 11.
4.0
7
3.5
6
VDD-OVP vs. Temperature
5
IHV-LC(µA)
3.0
IHV(mA)
35
Temperature(°C)
2.5
2.0
4
3
2
1.5
1
1.0
0
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
Temperature(°C)
Figure 12.
20
35
50
65
80
Temperature(°C)
IHV vs. Temperature
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
5
Figure 13.
IHV-LC vs. Temperature
www.fairchildsemi.com
9
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 Green — Mode Fairchild Power Switch (FPS™)
Typical Characteristics (Continued)
101.5
19.2
101.0
19.1
FOSC-G(kHz)
FOSC (kHz)
100.5
100.0
99.5
99.0
19.0
18.9
18.8
98.5
18.7
98.0
97.5
18.6
-40
-25
-10
5
20
35
50
65
80
95
110
-40
125
-25
-10
5
20
fOSC vs. Temperature
Figure 15.
0.64
1.17
0.63
1.16
0.62
1.15
VIN-ON (V)
V IN-OFF (V)
Figure 14.
0.61
0.60
50
65
80
95
110
125
95
110
125
95
110
125
95
110
125
fOSC-G vs. Temperature
1.14
1.13
1.12
0.59
1.11
0.58
-40
-25
-10
5
20
35
50
65
80
95
110
-40
125
-25
-10
5
20
Figure 16.
35
50
65
80
Temperature(°C)
Temperature(°C)
VIN-OFF vs. Temperature
Figure 17.
4.63
0.34
4.62
0.33
4.61
0.32
V IN-L(V)
V IN-H (V)
35
Temperature(°C)
Temperature(°C)
4.60
0.31
4.59
0.30
4.58
0.29
4.57
VIN-ON vs. Temperature
0.28
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
5
20
Temperature(°C)
Figure 18.
35
50
65
80
Temperature(°C)
VIN-H vs. Temperature
Figure 19.
4.75
VIN-L vs. Temperature
2.60
4.70
2.55
4.60
V FB-N (V)
V FB-OLP(V)
4.65
4.55
4.50
2.50
2.45
2.40
4.45
2.35
4.40
4.35
2.30
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
Temperature(°C)
Figure 20.
20
35
50
65
80
Temperature(°C)
VFB-OLP vs. Temperature
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
5
Figure 21.
VFB-N vs. Temperature
www.fairchildsemi.com
10
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Typical Characteristics (Continued)
1.800
2.20
2.15
1.700
2.05
V FB-ZDC (V)
V FB-G(V)
2.10
2.00
1.95
1.600
1.500
1.400
1.90
1.300
1.85
1.80
1.200
-40
-25
-10
5
20
35
50
65
80
95
110
-40
125
-25
-10
5
20
VFB-G vs. Temperature
Figure 23.
2.56
55.0
2.54
54.5
2.52
54.0
tD-OLP(ms)
IDD-ZDC (mA)
Figure 22.
35
50
65
80
95
110
125
95
110
125
Temperature(°C)
Temperature(°C)
2.50
2.48
VFB-ZDC vs. Temperature
53.5
53.0
2.46
52.5
2.44
52.0
51.5
2.42
-40
-25
-10
5
20
35
50
65
80
95
110
125
-40
-25
-10
Figure 24.
IDD-ZDC vs. Temperature
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
5
20
35
50
65
80
Temperature(°C)
Temperature(°C)
Figure 25.
tD-OLP vs. Temperature
www.fairchildsemi.com
11
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Typical Characteristics (Continued)
Startup Operation
Brown-In/Out Function
The HV pin is connected to bulk voltage through an
external resistor, RHV, as shown in Figure 26. When AC
voltage is applied to power system, an internal HV
startup circuit provides a high current (around 3.5mA) to
charge an external VDD capacitor until VDD voltage
exceeds the turn-on threshold voltage (VDD-ON). For
better power consumption, the HV startup circuit shuts
down during normal operation. The external VDD
capacitor and auxiliary winding maintain the VDD voltage
and provide operating current to controller.
FSBH0x70 has a built-in internal brown-in/out protection
comparator monitoring voltage of VIN pin. Figure 28
shows a resistive divider with low-pass filtering for linevoltage detection on the VIN pin.
Figure 28.
Once the VIN pin voltage is lower than 0.6V and lasts
for 500ms, the PWM gate is disabled to protect the
system from over current. FSBH0x70 starts up as VIN
increases above 1.1V. Because the divider resistors of
the VIN pin are connected behind the bridge, the ratio
calculation for brownout in PFC and non-PFC system
are different, as shown in Figure 29. The formulas are
provided in the following equations:
Figure 26. Startup Circuit
Slope Compensation
The FSBH-series is designed for flyback power
converters. The peak-current-mode control is used to
optimize system performance. Slope compensation is
added to reduce current loop gain and improve power
system stability. The FSBH-series has a built-in,
synchronized, positive slope for each switching cycle.
Brownout with PFC:
RC
2
⋅ 2VAC _ OUT ⋅ = 0.6
RA + RB + RC
π
RC
⋅ 2VAC _ OUT = 0.6
RA + RB + RC
The FSBH-series has an internal soft-start circuit that
reduces the SenseFET switching current during power
system startup. The characteristic curve of soft-start
time versus VLMT level is shown in Figure 27. The VLMT
level slopes up like a six-step staircase. In doing so,
power system can smoothly build up the rated output
voltage and effectively reduce voltage stress on the
PWM switch and output diode.
(2)
Brown-in level is determined by:
VAC _ IN =
Soft-Start Function
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
(1)
Brownout with non-PFC:
Soft-Start
Figure 27.
Brown-In/Out Function on VIN Pin
Figure 29.
1.1 RA + RB + RC
⋅
RC
2
(3)
VIN Level According to PFC Operation
www.fairchildsemi.com
12
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Functional Description
H/L Line Over-Power Compensation
The VIN pin functions are disabled from FSBH0x70A,
but FSBH0x70A has brown-in protection in the VDD pin.
There is a discharge current internal from VDD to ground
during startup. The HV source current must be larger
than IDD-ST to charge the capacitor of VDD. Therefore, the
brown-in level can be determined by RHV according to
the equation:
To limit the output power of the converter constantly,
high/low line over-power compensation is included.
Sensing the converter input voltage through the VIN pin,
the high/low line compensation function generates a
relative peak-current-limit threshold voltage for constant
power control, as shown in Figure 32.
2VAC − 12
IDD −ST
RHV =
(4)
Green-Mode Operation
The FSBH-series uses feedback voltage (VFB) as an
indicator of the output load and modulates the PWM
frequency, as shown in Figure 30, such that the
switching frequency decreases as load decreases. In
heavy load conditions, the switching frequency is
100kHz. Once VFB decreases below VFB-N (2.5V), the
PWM frequency starts to linearly decrease from 100kHz
to 18kHz for reducing switching losses. As VFB
decreases below VFB-G (2.0V), the switching frequency is
fixed at 18kHz and FSBH-series enters “deep” green
mode to reduce the standby power consumption.
Frequency
Figure 32.
Protections
The FSBH-series provides full protection functions to
prevent the power supply and the load from being
damaged. The protection features include:
PWM
Frequency
100kHz
Latch/Auto-Recovery Function
Besides the brownout protection and high/low line overpower compensation, the FSBH0170/0270/0370 has
additional protections via the VIN pin, such as pullHIGH latch and pull-LOW auto-recovery that depends
on the application. As shown in Figure 33, VIN level is
higher than 4.7V, FSBH-series is latched until the VDD is
discharged. FSBH-series is auto-recovery when the VIN
level is lower than 0.3V.
18kHz
VFB-ZDC
Figure 30.
VFB-G
VFB-N
Constant Power Control
VFB
PWM Frequency
As VFB decreases below VFB-ZDC (1.6V), FSBH-series
enters into burst-mode operation. When VFB drops
below VFB-ZDC, FSBH-series stops switching and the
output voltage starts to drop, which causes the
feedback voltage to rise. Once VFB rises above VFB-ZDC,
switching resumes. Burst mode alternately enables and
disables switching, thereby reducing switching loss to
improve power saving, as shown in Figure 31.
Figure 33.
VIN Pin Function
Open-Loop / Overload Protection (OLP)
When the upper branch of the voltage divider for the
shunt regulator (KA431 shown) is broken, as shown in
Figure 34, or over current or output short occurs, there
is no current flowing through the opto-coupler transistor,
which pulls the feedback voltage up to 6V.
When feedback voltage is above 4.6V for longer than
56ms, OLP is triggered. This protection is also triggered
when the SMPS output drops below the nominal value
longer than 56ms due to the overload condition.
Figure 31. Burst-Mode Operation
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
13
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
Brown-In Function of FSBH0x70A
VFB
Vo
PWM
3R
Over-Temperature Protection (OTP)
The SenseFET and the control IC are integrated,
making it easier to detect the temperature of the
SenseFET.
When
the
temperature
exceeds
approximately 142°C, thermal shutdown is activated.
R
KA431
Feedback Open
Loop
56ms
OLP
4.6V
Figure 34. OLP Operation
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
14
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
VDD Over-Voltage Protection (OVP)
VDD over-voltage protection prevents IC damage caused
by over voltage on the VDD pin. The OVP is triggered
when VDD voltage reaches 28V. Debounce time (typically
130µs) prevents false trigger by switching noise.
6V
9.83
9.00
6.67
6.096
8.255
7.61
3.683
3.20
5.08 MAX
7.62
0.33 MIN
3.60
3.00
(0.56)
2.54
0.56
0.355
0.356
0.20
9.957
7.87
1.65
1.27
7.62
NOTES: UNLESS OTHERWISE SPECIFIED
A) THIS PACKAGE CONFORMS TO
JEDEC MS-001 VARIATION BA
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSIONS.
D) DIMENSIONS AND TOLERANCES PER
ASME Y14.5M-1994
E) DRAWING FILENAME AND REVSION: MKT-N08FREV2.
Figure 35.
8-pin Dual In-Line Package (DIP)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
15
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 Green — Mode Fairchild Power Switch (FPS™)
Physical Dimensions
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 — Green Mode Fairchild Power Switch (FPS™)
© 2009 Fairchild Semiconductor Corporation
FSBH0F70A, FSBH0170/A, FSBH0270/A, FSBH0370 • Rev. 1.0.1
www.fairchildsemi.com
16
Similar pages