ETC FST16292MTDX

Revised November 2000
FST16292
12-Bit to 24-Bit Multiplexer/Demultiplexer Bus Switch
General Description
Features
The Fairchild Switch FST16292 provides twelve 2:1 highspeed CMOS TTL-compatible multiplexer/demultiplexer
bus switches. The low on resistance of the switch allows
inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.
■ 4Ω switch connection between two ports.
The select pin connects the A Port to the selected B Port
output. The A2 Ports are not externally connected, thus
have a 500Ω pull-down resistor to ground.
■ Control inputs compatible with TTL level.
■ Minimal propagation delay through the switch.
■ Low lCC.
■ Zero bounce in flow-through mode.
■ Internal 500Ω pull-down resistor on A2 Port.
Ordering Code:
Order Number
Package Number
Package Description
FST16292MEA
MS56A
56-Lead Shrink Small Outline Package (SSOP), JEDEC MO-118, 0.300 Wide
FST16292MTD
MTD56
56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Diagram
Connection Diagram
Pin Descriptions
Truth Table
Description
S
A1
A2
Function
S
Data-select input
L
B1
B2
A1 = B1 , A2 = B2
A1
Bus A
H
B2
B1
A1 = B2 , A2 = B1
B1 , B2
Bus B
Pin Name
© 2000 Fairchild Semiconductor Corporation
DS500104
www.fairchildsemi.com
FST16292 12-Bit to 24-Bit Multiplexer/Demultiplexer Bus Switch
July 1997
FST16292
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC )
−0.5V to +7.0V
DC Switch Voltage (VS)
−0.5V to +7.0V
DC Input Voltage (VIN) (Note 2)
−0.5V to +7.0V
DC Input Diode Current (lIK) VIN < 0V
−50mA
DC Output (IOUT ) Sink Current
128mA
Power Supply Operating (VCC)
4.0V to 5.5V
Input Voltage (VIN)
0V to 5.5V
Output Voltage (VOUT)
0V to 5.5V
Input Rise and Fall Time (tr, tf)
+/− 100mA
DC VCC/GND Current (ICC/IGND)
Storage Temperature Range (TSTG)
Recommended Operating
Conditions
Switch Control Input
−65°C to +150 °C
0ns/V to 5ns/V
Switch I/O
0ns/V to DC
−40 °C to +85 °C
Free Air Operating Temperature (TA)
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
Note 2: The input and output negative voltage ratings may be exceeded if
the input and output diode current ratings are observed.
DC Electrical Characteristics
Symbol
VCC
(V)
Parameter
TA = −40 °C to +85 °C
Min
Typ
(Note 3)
Max
−1.2
4.5
Units
IIN = −18mA
VIK
Clamp Diode Voltage
VIH
HIGH Level Input Voltage
4.0–5.5
VIL
LOW Level Input Voltage
4.0–5.5
0.8
V
II
Input Leakage Current
5.5
±1.0
µA
0≤ VIN ≤ 5.5V
0
10
µA
VIN = 5.5V
0 ≤A, B ≤ VCC
2.0
V
Conditions
V
IOZ
OFF-STATE Leakage Current
5.5
±1.0
µA
RON
Switch On Resistance
4.5
4
7
Ω
VIN = 0V, IIN = 64mA
(Note 4)
4.5
4
7
Ω
VIN = 0V, IIN = 30mA
4.5
8
12
Ω
VIN = 2.4V, IIN = 15mA
4.0
14
20
Ω
VIN = 2.4V, IIN = 15mA
ICC
Quiescent Supply Current
5.5
3
µA
VIN = VCC or GND, IOUT = 0
∆ ICC
Increase in ICC per Input
5.5
2.5
mA
One input at 3.4V
Other inputs at VCC or GND
Note 3: Typical values are at VCC = 5.0V and T A =+25°C
Note 4: Measured by the voltage drop between A and B pins at the indicated current through the switch. On resistance is determined by the lower of the
voltages on the two (A or B) pins.
www.fairchildsemi.com
2
TA = −40 °C to +85 °C,
Symbol
Parameter
CL = 50pF, RU = RD = 500Ω
VCC = 4.5 – 5.5V
Min
tPHL, tPLH
Prop Delay Bus to Bus (Note 5)
tPHL, tPLH
Prop Delay S to A1
tPZL, tPZH
Output Enable Time
S to B1 or B2
tPLZ, tPHZ
Output Disable Time
S to B1 or B2
VCC = 4.0V
Max
Min
Units
Conditions
Figure
No.
Max
0.25
0.25
ns
VI = OPEN
Figures
1, 2
1.5
7.0
7.4
ns
VI = OPEN
Figures
1, 2
1.0
6.7
7.0
ns
1.0
7.5
7.8
ns
VI = 7V for tPZL
VI = OPEN for tPZH
VI = 7V for tPLZ
VI = OPEN for tPHZ
Figures
1, 2
Figures
1, 2
Note 5: This parameter is guaranteed by design but is not tested. The bus switch contributes no propagation delay other than the RC delay of the typical On
resistance of the switch and the 50pF load capacitance, when driven by an ideal voltage source (zero output impedance).
Capacitance
Symbol
(Note 6)
Parameter
Typ
Max
Units
Conditions
CIN
Control Pin Input Capacitance
3
pF
VCC = 5.0V
CI/O
Input/Output Capacitance
10
pF
VCC = 5.0V, S0 =GND
Note 6: TA = +25°C, f = 1 MHz, Capacitance is characterized but not tested.
AC Loading and Waveforms
Note: Input driven by 50 Ω source terminated in 50 Ω
Note: CL includes load and stray capacitance
Note: Input PRR = 1.0 MHz, tW = 500 ns
FIGURE 1. AC Test Circuit
FIGURE 2. AC Waveforms
3
www.fairchildsemi.com
FST16292
AC Electrical Characteristics
FST16292
Physical Dimensions inches (millimeters) unless otherwise noted
56-Lead Shrink Small Outline Package (SSOP), JEDEC MO-118, 0.300 Wide
Package Number MS56A
www.fairchildsemi.com
4
56-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Package Number MTD56
Technology Description
The Fairchild Switch family derives from and embodies Fairchild’s proven switch technology used for several years in its
74LVX3L384 (FST3384) bus switch product.
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
5
www.fairchildsemi.com
FST16292 12-Bit to 24-Bit Multiplexer/Demultiplexer Bus Switch
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)