Ordering number : ENN7000 FTD1012 P-Channel Silicon MOSFET FTD1012 Load Switching Applications • • • • Package Dimensions Low ON-resistance. 4V drive. Mounting height 1.1mm. Composite type, facilitating high-density mounting. unit : mm 2155A [FTD1012] 3.0 0.65 5 4.5 6.4 0.5 8 0.425 0.95 Features 4 1.0 0.25 (0.95) 1 1 : Drain1 2 : Source1 3 : Source1 4 : Gate1 0.125 5 : Gate2 6 : Source2 7 : Source2 8 : Drain2 SANYO : TSSOP8 0.1 Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS --30 V Gate-to-Source Voltage VGSS ±20 V Drain Current (DC) ID Drain Current (Pulse) --3 A PW≤10µs, duty cycle≤1% --15 A Allowable Power Dissipation IDP PD Mounted on a ceramic board (1000mm 2✕0.8mm) 1unit 0.8 W Total Dissipation PT Mounted on a ceramic board (1000mm2✕0.8mm) 1.0 W Channel Temperature Tch 150 °C Storage Temperature Tstg --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance V(BR)DSS IDSS IGSS VGS(off) yfs Conditions Ratings min typ ID=--1mA, VGS=0 VDS=--30V, VGS=0 VGS=±16V, VDS=0 --30 VDS=--10V, ID=--1mA VDS=--10V, ID=--3A --1.0 3.8 Marking : D1012 Unit max V --1 µA ±10 µA --2.4 V 5.5 S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71001 TS IM TA-2300 No.7000-1/4 FTD1012 Continued from preceding page. Ratings Parameter Symbol RDS(on) 1 RDS(on) 2 ID=--3A, VGS=--10V ID=--2A, VGS=--4.5V 50 65 mΩ Static Drain-to-Source On-State Resistance 80 110 mΩ RDS(on) 3 Ciss ID=--2A, VGS=--4V VDS=--10V, f=1MHz 85 120 mΩ Input Capacitance 1000 pF Output Capacitance Coss VDS=--10V, f=1MHz 250 pF Reverse Transfer Capacitance Crss VDS=--10V, f=1MHz 160 pF Turn-ON Delay Time td(on) See specified Test Circuit 10 ns Rise Time tr td(off) See specified Test Circuit 30 ns See specified Test Circuit 55 ns tf See specified Test Circuit 50 ns Qg VDS=--10V, VGS=--10V, ID=--3A 19 nC Gate-to-Source Charge Qgs VDS=--10V, VGS=--10V, ID=--3A 2 nC Gate-to-Drain “Miller” Charge Qgd VDS=--10V, VGS=--10V, ID=--3A 4 Diode Forward Voltage VSD IS=--3A, VGS=0 Turn-OFF Delay Time Fall Time Total Gate Charge Conditions VDD= --15V Switching Time Test Circuit min Unit max nC --1.0 --1.5 V Electrical Connection VIN 0V --10V typ D2 S2 S2 G2 D1 S1 S1 G1 ID= --3A RL=5Ω VIN D VOUT PW=10µs D.C.≤1% G P.G FTD1012 50Ω S ID -- VDS 0V VDS= --10V --7 --4 . VGS= --2.5V --2 --5 --4 --3 --2 --1 --1 0 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Drain-to-Source Voltage, VDS -- V --0.9 --1.0 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 Gate-to-Source Voltage, VGS -- V IT02537 RDS(on) -- VGS 140 --3.5 IT02538 RDS(on) -- Ta 140 Ta=25°C Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ °C --3 --6 --25 V .0 --3 Ta= 25 75 °C °C --4 . ID -- VGS --8 Drain Current, ID -- A --4 --10. 0 Drain Current, ID -- A --5 5V V --8.0V --6.0V --6 120 100 ID= --2A --3A 80 60 40 20 0 0 --2 --4 --6 --8 --10 --12 --14 --16 Gate-to-Source Voltage, VGS -- V --18 --20 IT02539 120 4.0V = -S VG , .5V --2A = --4 S I D= VG , --2A I D= 100 80 V --10.0 , V GS= 60 A I D= --3 40 20 0 --60 --40 --20 0 20 40 60 80 100 Ambient Temperature, Ta -- °C 120 140 160 IT02540 No.7000-2/4 yfs -- ID 3 2 10 7 5 C 25° 3 2 °C --25 C 75° Ta= 1.0 7 5 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 --0.1 7 5 3 2 5 7 --10 IT02541 0 Gate-to-Source Voltage, VGS -- V --9 Ciss 3 2 Coss Crss 100 7 5 3 2 --0.6 --0.8 --1.0 --1.2 --1.4 IT02542 VDS= --10V ID= --3A f=1MHz 1000 7 5 --0.4 VGS -- Qg --10 3 2 --0.2 Diode Forward Voltage, VSD -- V Ciss, Coss, Crss -- VDS 10000 7 5 Ciss, Coss, Crss -- pF --1.0 7 5 3 2 --0.001 2 Drain Current, ID -- A --8 --7 --6 --5 --4 --3 --2 --1 0 10 0 --5 --10 --15 --20 --30 --25 Drain-to-Source Voltage, VDS -- V 0 3 2 --10 7 5 Drain Current, ID -- A 3 2 td(off) tf 3 2 tr td(on) 10 7 5 3 2 3 2 2 3 5 7 2 --1.0 3 Drain Current, ID -- A 5 7 --10 IT02546 PD -- Ta 1.5 20 15 IT02544 ASO IDP= --15A ID= --3A C 0m s op er 3 2 at io Operation in this area is limited by RDS(on). --0.1 7 5 <10µs 1m s 100µs 10 m s 10 D --1.0 7 5 3 2 1.0 --0.1 10 Total Gate Charge, Qg -- nC VDD= --15V VGS= --10V 100 7 5 5 IT02543 SW Time -- ID 1000 7 5 Switching Time, SW Time -- ns VGS=0 --0.01 7 5 3 2 0.1 --0.01 Allowable Power Dissipation, PD -- W IF -- VSD --10 7 5 3 2 VDS= --10V Ta=7 5°C 25°C --25°C 100 7 5 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S FTD1012 n( Ta = 25 °C ) Ta=25°C Single pulse Mounted on a ceramic board(1000mm2✕0.8mm)1unit --0.01 --0.01 2 3 5 7--0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Drain-to-Source Voltage, VDS -- V 5 7--100 IT03263 Mounted on a ceramic board(1000mm2✕0.8mm) 1.0 To ta 0.8 ld 1un it iss ipa tio n 0.5 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT03265 No.7000-3/4 FTD1012 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2001. Specifications and information herein are subject to change without notice. PS No.7000-4/4