Source FTM-3128C-SL2IG 155mï½ 2.67gbps spring-latch sfp transceiver Datasheet

Apr 05, 2007
155M~2.67Gbps Spring-latch SFP Transceiver
(With monitoring function, industrial or extended case temperature
for 2~80km transmission, RoHS compliant)
Members of FlexonTM Family
‹
Compatible with Telcordia GR-253-CORE
‹
Compatible with FCC 47 CFR Part 15, Class B
‹
Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
‹
RoHS compliant
Description
Fiberxon 155M~2.67Gbps Spring-latch i-temp or
Features
E-temp SFP transceiver is high performance, cost
‹
Support 155M~2.67Gbps multi-rate data links
‹
1310nm FP laser and PIN photodiode for 2km
transmission
‹
1310nm
uncooled
DFB
laser
and
PIN
photodiode for 15km transmission
‹
1310nm
uncooled
DFB
laser
and
APD
and
APD
photodiode for 40km transmission
‹
1550nm
uncooled
DFB
laser
photodiode for 80km transmission
‹
Digital diagnostic monitor interface compliant
with SFF-8472
‹
SFP MSA package with duplex LC connector
‹
With Spring latch for high density application
‹
Class I laser product
‹
Hot-pluggable capability
‹
Operating case temperature:
Extended: -5 to +85℃ or -20 to +85℃
Industrial : -40 to +85℃
Applications
‹
1×/2× Fiber Channel
‹
Gigabit Ethernet
‹
SDH/SONET/ATM
‹
Other optical links
Standard
effective module that supports data-rate up to
2.67Gbps and transmission distance from 2km to
80km.
The transceiver consists of two sections: The
transmitter section incorporates a FP or uncooled
DFB laser, and the receiver section consists of a
PIN
photodiode
or
APD
integrated
with
a
trans-impedance preamplifier (TIA). All modules
satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
The transceiver provides an enhanced monitoring
interface, which allows real time access to the
transceiver
operating
transceiver
temperature,
parameters
laser
bias
such
as
current,
transmitted optical power, received optical power
and transceiver supply voltage by reading a built-in
memory with I2C interface. For further information,
please refer to SFF-8472 Rev 9.5.
Fiberxon 155M~2.67Gbps i-temp or E-temp SFP
‹
Compatible with SFP MSA
‹
Compatible with SFF-8472 Rev 9.5
‹
Compatible with ITU-T G.957 and G.958
transceiver is compliant with RoHS
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 13
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
Regulatory Compliance
The transceivers have been tested according to American and European product safety and electromagnetic
compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer
to FlexonTM regulatory specification and safety guidelines, or contact Fiberxon, Inc. America sales office listed
at the end of the documentation.
Table 1 - Regulatory Compliance
Feature
Standard
Electrostatic Discharge
MIL-STD-883E
(ESD) to the Electrical Pins
Method 3015.7
Electrostatic Discharge (ESD)
IEC 61000-4-2
to the Duplex LC Receptacle
GR-1089-CORE
Performance
Class 2(>2000 V)
Compatible with standards
FCC Part 15 Class B
Electromagnetic
EN55022 Class B (CISPR 22B)
Interference (EMI)
Compatible with standards
VCCI Class B
Immunity
Laser Eye Safety
Component Recognition
IEC 61000-4-3
Compatible with standards
FDA 21CFR 1040.10 and 1040.11
Compatible with Class 1 laser
EN60950, EN (IEC) 60825-1,2
product.
UL and CSA
Compatible with standards
2002/95/EC 4.1&4.2
RoHS
Compliant with standards note
2005/747/EC
Note:
In light of item 5 in Annex of 2002/95/EC, “Pb in the glass of cathode ray tubes, electronic components and
fluorescent tubes.” and item 13 in Annex of 2005/747/EC , “ Lead and cadmium in optical and filter glass.” ,the
two exemptions are being concerned for Fiberxon’s transceivers, because Fiberxon’s transceivers use glass,
which may contain Pb, for components such as lenses, windows, isolators, and other electronic components.
Absolute Maximum Ratings
Absolute Maximum Ratings are those values beyond which damage to the devices may occur.
Table 2 – Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Unit
Storage Temperature
TS
-40
+85
°C
Supply Voltage
VCC
-0.5
3.6
V
-
5
95
%
Operating Humidity
FTM-3128C-SL2E(i)G
Input Optical Power
FTM-3128C-SL15E(i)G
FTM-3128C-SL40iG
+3
Pmax
FTM-5128C-SL80EG
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
+3
-3
-3
Page 2 of 13
dBm
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
Recommended Operating Conditions
Table 3 - Recommended Operating Conditions
Parameter
Operating
Case
Temperature
Symbol
Extended
Min.
Tc
Industrial
Power Supply Voltage
VCC
Power Supply Current
ICC
Typical
Max.
Unit
-5/-20
+85
-40
+85
3.13
3.47
V
300
mA
2670
Mbps
Data Rate
155
2488
°C
Optical and Electrical Characteristics
All parameters are specified at overall operating case temperature and power supply range, and with a PRBS
223-1 test pattern @2.488Gbps unless otherwise stated.
FTM-3128C-SL2E(i)G
(1310nm FP and PIN, I-16/OC48 SR, Monitoring function)
Table 4 –Optical and Electrical Characteristics
Parameter
Symbol
Min.
Typical
Max.
Unit
1360
nm
4
nm
-3
dBm
Notes
Transmitter
Centre Wavelength
λC
1266
Spectral Width (RMS)
σ
Average Output Power
P0ut
-10
Extinction Ration
EX
8.2
2
dB
P0ut@TX Disable Asserted
-45
dBm
Jitter Generation (RMS)
0.01
UI
Jitter Generation (pk-pk)
0.1
UI
Output Optical Eye
ITU-T G.957 compatible
Data Input Differential Swing
VIN
Input Differential Impedance
ZIN
TX Disable
500
2
2400
mV
100
2.0
Vcc+0.3
V
Enable
0
0.8
V
2.0
Vcc+0.3
V
0
0.8
V
1580
nm
-18
dBm
Normal
3
Ω
Disable
Fault
TX Fault
1
Receiver
Centre Wavelength
λC
1260
Receiver Sensitivity
Receiver Overload
-3
Reflection
LOS De-Assert
LOSD
LOS Assert
LOSA
LOS Hysteresis
Data Output Differential Swing
VOUT
dBm
-27
dB
-20
dBm
-35
dBm
0.5
4.5
dB
400
1200
mV
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
4
Page 3 of 13
5
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
LOS
Preliminary Datasheet
April. 05, 2007
High
2.0
Vcc+0.3
V
Low
0
0.8
V
Notes:
1. The optical power is launched into 9/125 SMF.
2. Measured with a PRBS 223-1 test pattern @2.488Gbps.
3. Internally AC-coupled and terminated to 100Ω differential load.
4. Measured with a PRBS 223-1 test pattern, BER better than or equal to 1×10-10
5. AC-coupled CML logic family
FTM-3128C-SL15E(i)G
(1310nm DFB and PIN, S-16.1/OC48 IR-1, Monitoring function)
Table 5 –Optical and Electrical Characteristics
Parameter
Symbol
Min.
Typical
Max.
Unit
1360
nm
1
nm
0
dBm
Notes
Transmitter
Centre Wavelength
λC
Spectral Width (-20dB)
∆λ
Average Output Power
P0ut
-5
SMSR
30
dB
EX
8.2
dB
Side Mode Suppression Ratio
Extinction Ration
1260
P0ut@TX Disable Asserted
-45
dBm
Jitter Generation (RMS)
0.01
UI
Jitter Generation (pk-pk)
0.1
UI
Output Optical Eye
ITU-T G.957 compatible
Data Input Differential Swing
VIN
Input Differential Impedance
ZIN
TX Disable
500
2
2400
mV
100
2.0
Vcc+0.3
V
Enable
0
0.8
V
2.0
Vcc+0.3
V
0
0.8
V
1580
nm
-18
dBm
Normal
3
Ω
Disable
Fault
TX Fault
1
Receiver
Centre Wavelength
λC
1260
Receiver Sensitivity
Receiver Overload
0
Reflection
LOS De-Assert
LOSD
LOS Assert
LOSA
LOS Hysteresis
LOS
dBm
-27
dB
-20
dBm
-35
dBm
0.5
4.5
dB
400
1200
mV
High
2.0
Vcc+0.3
V
Low
0
0.8
V
Data Output Differential Swing
VOUT
Notes:
1. The optical power is launched into 9/125 SMF.
2. Measured with a PRBS 223-1 test pattern @2.488Gbps.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
4
Page 4 of 13
5
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
3. Internally AC-coupled and terminated to 100Ω differential load.
4. Measured with a PRBS 223-1 test pattern, BER better than or equal to 1×10-10
5. AC-coupled CML logic family
FTM-3128C-SL40iG
(1310nm DFB and APD, L-16.1/OC48 LR-1, Monitoring function)
Table 6 –Optical and Electrical Characteristics
Parameter
Symbol
Min.
Typical
Max.
Unit
1335
nm
1
nm
+3
dBm
Notes
Transmitter
Centre Wavelength
λC
Spectral Width (-20dB)
∆λ
Average Output Power
P0ut
-2
SMSR
30
dB
EX
8.2
dB
Side Mode Suppression Ratio
Extinction Ration
1280
P0ut@TX Disable Asserted
-45
dBm
Jitter Generation (RMS)
0.01
UI
Jitter Generation (pk-pk)
0.1
UI
Output Optical Eye
ITU-T G.957 compatible
Data Input Differential Swing
VIN
Input Differential Impedance
ZIN
TX Disable
500
2
2400
mV
100
2.0
Vcc+0.3
V
Enable
0
0.8
V
2.0
Vcc+0.3
V
0
0.8
V
1580
nm
-27
dBm
Normal
3
Ω
Disable
Fault
TX Fault
1
Receiver
Centre Wavelength
λC
1260
Receiver Sensitivity
Receiver Overload
-9
Reflection
LOS De-Assert
LOSD
LOS Assert
LOSA
LOS Hysteresis
LOS
dBm
-27
dB
-29
dBm
-45
dBm
0.5
4.5
dB
400
1200
mV
High
2.0
Vcc+0.3
V
Low
0
0.8
V
Data Output Differential Swing
VOUT
Notes:
1. The optical power is launched into 9/125 SMF.
2. Measured with a PRBS 223-1 test pattern @2.488Gbps.
3. Internally AC-coupled and terminated to 100Ω differential load.
4. Measured with a PRBS 223-1 test pattern, BER better than or equal to 1×10-10
5. AC-coupled CML logic family
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
4
Page 5 of 13
5
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
FTM-5128C-SL80EG (1550nm DFB and APD, L-16.2/OC48 LR-2, Monitoring function)
Table 7 –Optical and Electrical Characteristics
Parameter
Symbol
Min.
Typical
Max.
Unit
1580
nm
1
nm
+3
dBm
Notes
Transmitter
Centre Wavelength
λC
Spectral Width (-20dB)
∆λ
Average Output Power
P0ut
-2
SMSR
30
dB
EX
8.2
dB
Side Mode Suppression Ratio
Extinction Ration
1500
P0ut@TX Disable Asserted
-45
dBm
2
dB
Jitter Generation (RMS)
0.01
UI
Jitter Generation (pk-pk)
0.1
UI
Optical path penalty
Output Optical Eye
ITU-T G.957 compatible
Data Input Differential Swing
VIN
Input Differential Impedance
ZIN
Disable
Enable
Fault
Normal
TX Disable
TX Fault
Centre Wavelength
500
λC
1260
Receiver Sensitivity
Receiver Overload
LOS De-Assert
LOSD
LOS Assert
LOSA
LOS Hysteresis
Data Output Differential Swing
LOS
2400
mV
VOUT
High
Low
3
Ω
Vcc+0.3
0.8
Vcc+0.3
0.8
V
V
V
V
1580
nm
-28
dBm
-9
Reflection
5
2
100
2.0
0
2.0
0
Receiver
1
4
dBm
-27
dB
-29
dBm
-45
dBm
0.5
4.5
dB
400
1200
mV
2.0
0
Vcc+0.3
0.8
V
V
6
Notes:
1. The optical power is launched into 9/125 SMF.
2. Measured with a PRBS 223-1 test pattern @2.488Gbps.
3. Internally AC-coupled and terminated to 100Ω differential load.
4. Measured with a PRBS 223-1 test pattern @2.488Gbps, BER better than or equal to 1×10-10
5. Measured with a PRBS 223-1 test pattern @2.488Gbps, maximum dispersion 1600nm/ps , BER ≤1×
10-10.
6. AC-coupled CML logic family
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 6 of 13
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
EEPROM Information
The SFP MSA defines a 256-byte memory map in EEPROM describing the transceiver’s capabilities,
standard interfaces, manufacturer, and other information, which is accessible over a two-wire serial interface
at the 8-bit address 1010000X (A0h). The memory contents refer to Table 8
Table 8 - EEPROM Serial ID Memory Contents (A0h)
Addr.
Field Size
(Bytes)
Name of Field
Hex
Description
0
1
Identifier
03
SFP
1
1
Ext. Identifier
04
MOD4
2
1
Connector
07
LC
3—10
8
Transceiver
00 xx 00 00 00 00 00 00
11
1
Encoding
03
NRZ
12
1
BR, nominal
xx
155~2670Mbps
13
1
Reserved
00
14
1
Length (9um)-km xx
2km/15km/40km/80km (02/0F/28/50)
15
1
Length (9um) xx
2km/15km/40km/80km (14/96/FF/FF)
16
1
Length (50um) 00
17
1
Length (62.5um) 00
18
1
Length (copper) 00
19
1
Reserved
20—35
16
Vendor name
36
1
Reserved
37—39
3
Vendor OUI
40—55
16
Vendor PN
56—59
4
Vendor rev
xx xx 20 20
ASCⅡ( “31 30 20 20” means 1.0 revision)
60-61
2
Wavelength
05 1E/06 0E
1310nm/1550nm
62
1
Reserved
00
63
1
CC BASE
xx
64—65
2
Options
00 1A
66
1
BR, max
00
67
1
BR, min
00
68—83
16
Vendor SN
84—91
8
92
1
93
1
94
1
95
96—255
OC 48 short/intermediate/long distance
00
46 49 42 45 52 58 4F 4E
“FIBERXON INC. “(ASCⅡ)
20 49 4E 43 2E 20 20 20
00
00 00 00
46 54 4D 2D xx 31 32 38
“FTM-x128C-SLxxxG ” (ASCⅡ)
43 2D 53 4C xx xx xx 47
Check sum of bytes 0 - 62
LOS, TX_FAULT, and TX_DISABLE
xx xx xx xx xx xx xx xx
ASCⅡ,
xx xx xx xx xx xx xx xx
Vendor date codexx xx xx xx xx xx 20 20
Year (2 bytes), Month (2 bytes), Day (2 bytes)
Diagnostic type xx
Enhanced option
Diagnostics
Diagnostics (Optional Alarm/warning flags,
B0
Soft TX_FAULT , Soft TX_LOS monitoring)
SFF-8472
02
Diagnostics (SFF-8472 Rev 9.4)
1
CC EXT
xx
Check sum of bytes 64 - 94
160
Vendor specific
Note: The “xx” byte should be filled in according to practical case. For more information, please refer to the
related document of SFF-8472 Rev 9.5.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 7 of 13
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
Monitoring Specification
The digital diagnostic monitoring interface also defines another 256-byte memory map in EEPROM, which
makes use of the 8 bit address 1010001X (A2h). Please see Figure 1. For detail EEPROM information,
please refer to the related document of SFF-8472 Rev 9.5. The monitoring specification of this product is
described in Table 9
Figure 1, EEPROM Memory Map Specific Data Field Descriptions
Table 9 - Monitoring Specification
Parameter
FTM-3128C-SL2E(i)G
Temperature
FTM-3128C-SL15E(i)G
Range
Accuracy
Calibration*
Internal
-20/-40 to +95°C
FTM-3128C-SL40iG
-40 to +95°C
FTM-5128C-SL80EG
-30 to +95°C
Internal
±3°C
External
External
FTM-3128C-SL2E(i)G
Voltage
Bias Current
FTM-3128C-SL15E(i)G
FTM-3128C-SL40iG
Internal
3.0 to 3.6V
Internal
±3%
External
FTM-5128C-SL80EG
External
FTM-3128C-SL2E(i)G
Internal
FTM-3128C-SL15E(i)G
0 to 100mA
FTM-3128C-SL40iG
Internal
±10%
External
FTM-5128C-SL80EG
TX Power
RX Power
External
FTM-3128C-SL2E(i)G
-11 to -2dBm
FTM-3128C-SL15E(i)G
-6 to 1dBm
FTM-3128C-SL40iG
-3 to 4dBm
FTM-5128C-SL80EG
-3 to 4dBm
FTM-3128C-SL2E(i)G
-20 to -2dBm
FTM-3128C-SL15E(i)G
-20 to 1dBm
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Internal
Internal
±3dB
External
External
±3dB
Internal
Internal
Page 8 of 13
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
FTM-3128C-SL40iG
-29 to -8dBm
External
FTM-5128C-SL80EG
-30 to -8dBm
External
Recommended Host Board Power Supply Circuit
Figure 2 shows the recommended host board power supply circuit.
Figure 2, Recommended Host Board Power Supply Circuit
Recommended Interface Circuit
Figure 3 shows the recommended interface circuit.
Host Board
SFP Module
Vcc (+3.3V)
VccT
10K Ω
2×4.7K to 10KΩ
TX Disable
TX Fault
Protocol
IC
SERDES
IC
SerDat Out +
Z=50Ω
TD +
SerDat Out -
Z=50Ω
TD -
SerDat In +
Z=50Ω
SerDat In -
Z=50Ω
Laser
driver
RD +
Amplifier
RD -
LOS
Vcc (+3.3V)
3×4.7K to 10KΩ
MOD-DEF2
EEPROM
MOD-DEF1
MOD-DEF0
RGND
Figure 3, Recommended Interface Circuit
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 9 of 13
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
Pin Definitions
Figure 4 below shows the pin numbering of SFP electrical interface. The pin functions are described in Table
10 and the accompanying notes.
P in 2 0
T O P V IE W
OF BOARD
P in 1 1
P in 1 0
B O T T O M V IE W
OF BOARD
P in 1
Figure 4, Pin View
Table 10 – Pin Function Definitions
Pin No.
Name
1
VeeT
2
TX Fault
3
Function
Plug Seq.
Notes
Transmitter Ground
1
Transmitter Fault Indication
3
Note 1
TX Disable
Transmitter Disable
3
Note 2
4
MOD-DEF2
Module Definition 2
3
Note 3
5
MOD-DEF1
Module Definition 1
3
Note 3
6
MOD-DEF0
Module Definition 0
3
Note 3
7
Rate Select
Not Connected
3
8
LOS
Loss of Signal
3
9
VeeR
Receiver Ground
1
10
VeeR
Receiver Ground
1
11
VeeR
Receiver Ground
1
12
RD-
Inv. Received Data Out
3
Note 5
13
RD+
Received Data Out
3
Note 5
14
VeeR
Receiver Ground
1
15
VccR
Receiver Power
2
16
VccT
Transmitter Power
2
17
VeeT
Transmitter Ground
1
18
TD+
Transmit Data In
3
Note 6
19
TD-
Inv. Transmit Data In
3
Note 6
20
VeeT
Transmitter Ground
1
Note 4
Notes:
1. TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host
board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 10 of 13
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the
module with a 4.7k~10kΩ resistor. Its states are:
Low (0~0.8V):
Transmitter on
(>0.8V, <2.0V):
Undefined
High (2.0~3.465V):
Transmitter Disabled
Open:
Transmitter Disabled
3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7k~10kΩ resistor on
the host board. The pull-up voltage shall be VccT or VccR.
MOD-DEF 0 grounded by the module indicates that the module is present
MOD-DEF 1 is the clock line of two-wire serial interface for serial ID
MOD-DEF 2 is the data line of two-wireserial interface for serial ID
4. LOS is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board to
a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
In the low state, the output will be pulled to less than 0.8V.
5. These are the differential receiver outputs. They are AC-coupled 100Ω differential lines which should be
terminated with 100Ω (differential) at the user SERDES.
6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω differential
termination inside the module.
Mechanical Design Diagram
The mechanical design diagram is shown in Figure 5.
Figure 5, Mechanical Design Diagram of SFP with Spring Latch
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 11 of 13
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
Ordering Information
Part No.
FTM-3128C-SL2iG
FTM-3128C-SL2EG
FTM-3128C-SL15iG
FTM-3128C-SL15EG
FTM-3128C-SL40iG
FTM-5128C-SL80EG
Product Description
1310nm, 155M ~ 2.67Gbps, 2km, SFP with Spring latch, Monitoring function,
-40°C~+85°C, RoHS compliant
1310nm, 155M ~ 2.67Gbps, 2km, SFP with Spring latch, Monitoring function,
-5°C~+85°C, RoHS compliant
1310nm, 155M ~ 2.67Gbps, 15km, SFP with Spring latch, Monitoring function,
-40°C~+85°C, RoHS compliant
1310nm, 155M ~ 2.67Gbps, 15km, SFP with Spring latch, Monitoring function,
-5°C~+85°C, RoHS compliant
1310nm, 155M ~ 2.67Gbps, 40km, SFP with Spring latch, Monitoring function,
-40°C~+85°C, RoHS compliant
1550nm, 155M ~ 2.67Gbps, 80km, SFP with Spring latch, Monitoring function,
-20°C~+85°C, RoHS compliant
Related Documents
For further information, please refer to the following documents:
■
FlexonTM SFP Installation Guide
■
FlexonTM SFP Application Notes
■
SFP Multi-Source Agreement (MSA)
■
SFF-8472 Rev 9.5
Obtaining Document
You can visit our website:
http://www.fiberxon.com
Or contact Fiberxon, Inc. America Sales Office listed at the end of the documentation to get the latest
documents.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 12 of 13
155M~2.67Gbps i/E-temp Spring-latch SFP Transceiver
2~80km transmission, RoHS compliant
Preliminary Datasheet
April. 05, 2007
Revision History
Revision
Initiate
Review
Approve
Subject
Release
Date
Rev. 1a
Univer. Yang
Bell. Huang
Walker. Wei
Initial datasheet
Apr. 05, 2007
© Copyright Fiberxon Inc. 2007
All Rights Reserved.
All information contained in this document is subject to change without notice. The products described in this
document are NOT intended for use in implantation or other life support applications where malfunction may
result in injury or death to persons.
The information contained in this document does not affect or change Fiberxon’s product specifications or
warranties. Nothing in this document shall operate as an express or implied license or indemnity under the
intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained
in specific environments, and is presented as an illustration. The results obtained in other operating
environment may vary.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event
will Fiberxon be liable for damages arising directly from any use of the information contained in this document.
Contact
U.S.A. Headquarter:
5201 Great America Parkway, Suite 340
Santa Clara, CA 95054
U. S. A.
Tel: 408-562-6288
Fax: 408-562-6289
Or visit our website: http://www.fiberxon.com
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 13 of 13
Similar pages