FTR-J2 Series Ultra small High Voltage DC Relay FTR-J2 Series RoHS compliant n Features l 10A, 450V DC high-voltage switching l Contact voltage drop: typical 0.1V l Inrush Current 150A (Capacitive load ) l Compact size ( L x W x H = 24 x 23.5 x 27mm ) l 2 x 1 form A l Coil sensitivity 1W l High insulation between contacts and coil - Insulation distance : Clearance/creepage > 6mm - Dielectric strength : 4,000 VAC - Surge strength : 10,000 V l Plastic materials conform to UL94 flame class V-0 l RoHS Compliant l Optional transparent cover nORDERING INFORMATION [Example] FTR-J2 A K 012 W – RG (a) (b) (c) (d) (e) (f ) (a) Series name FTR-J2 series (b) Contact arrangement A: 2 x 1 form A (c) Coil K: Standard sensitivity (d) Nominal coil voltage Please refer to COIL DATA CHART (e) Contact material W: silver alloy (f) Optional RG: Transparent cover Note: The designation name is printed on the top of the relay as follows: (Example: Ordered type: FTR-J2AK012W Printing: J2AK012W FTR-J2 Series n COIL DATA CHART 1 2 coils in series (10A, 450VDC configuration) Part Number Nominal Coil Resistance Must Operate Voltage (VDC) ( ±10%) Voltage Must Release Voltage FTR-J2AK005W 10 94 Ω 7.0 VDC 0.5 VDC FTR-J2AK006W 12 136 Ω 8.4 VDC 0.6 VDC FTR-J2AK012W 24 540 Ω 16.8 VDC 1.2 VDC FTR-J2AK024W 48 2,200 Ω 33.6 VDC 2.4 VDC FTR-J2AK048W 96 8,800 Ω 67.2 VDC 4.8 VDC FTR-J2AK060W 120 13,580 Ω 84.0 VDC 6.0 VDC FTR-J2AK110W 220 45,600 Ω 154.0 VDC 11.0 VDC Nominal Power (± 10%) Approximately 1.06W Note 1: Nominal voltage is different from indication of part number. Please refer to the COIL DATA CHART 2 for single coil configuration data. Note 2: All values in the table valid at 20˚C ambient temperature. n COIL DATA CHART 2 Single coil (10A, 200VDC configuration) Part Number Nominal Coil Resistance Must Operate Voltage (VDC) ( ±10%) Voltage Must Release Voltage FTR-J2AK005W 5 47 Ω 3.5 VDC 0.25 VDC FTR-J2AK006W 6 68 Ω 4.2 VDC 0.3 VDC FTR-J2AK012W 12 270 Ω 8.4 VDC 0.6 VDC FTR-J2AK024W 24 1,100 Ω 16.8 VDC 1.2 VDC FTR-J2AK048W 48 4,400 Ω 33.6 VDC 2.4 VDC FTR-J2AK060W 60 6,790 Ω 42.0 VDC 3.0 VDC FTR-J2AK110W 110 22,800 Ω 77.0 VDC 5.5 VDC Nominal Power (± 10%) Approximately 0.53W Note: All values in the table valid at 20˚C ambient temperature. n SCHEMATICS Connection on PCB 2 coils in series Each relay section is used indepentdently Bottom view COIL DATA CHART 1 COIL DATA CHART 2 FTR-J2 Series n specifications FTR-J2 series FTR-J2AK ( )W Contact Arrangement 2 x 1 form A Contact material Silver alloy Rating (refer to CIRCUIT) 10A, 450VDC (resistive load) + polarity pin 7 and 4 * each NO contact connected in series 10A, 200VDC (resistive load) (single contact) + polarity pin 7 and 4 Coil Overload switching 10A, 500VDC (resistive load) * each NO contact connected in series Maximum carrying current 12A Inrush current Peak 150A (capacitive load / 340VDC, 1410µ F) Contact voltage drop Typical 0.1V (at nominal contact current) Operate voltage (at 20°C) Maximum 70% of nominal voltage Release voltage (at 20°C) Minimum 5% of nominal voltage Operating temperature (no frost) -40°C to +85°C -40°C to +70°C, "-RG" transparent cover version Time value Insulation Operate (at nominal voltage) 15ms maximum, excluding contact bounce time Release (at nominal voltage) 5ms maximum Resistance Dielectric strength Minimum 1,000MΩ (at 500VDC) between open contacts 1,000 VAC (50/60 Hz) 1 min. between contact sets 4,000 VAC (50/60 Hz) 1 min. between contacts and coil 1,000 VAC (50/60 Hz) 1 min. Life Surge strength between contact and coil 10,000 V (1.2 x 50µ s) Electrical 10K operations (10A, 450VDC at resistive load) Mechanical 2M operations Vibration Endurance resistance Misoperation 10 to 55 Hz at double amplitude of 1.5 mm Shock Endurance resistance Misoperation 200 m/s2 (11±1ms) Weight Approximately 26 g 10 to 55 Hz at double amplitude of 1.5 mm 1,000 m/s2 (6±1ms) Note: Use a varistor as a protective circuit against reverse surge connected parallel to the coil. The reverse blocking voltage should be about 3 times the value of the power source voltage. n SAFETY STANDARDS lUL508 l 10A, 450VDC, resistive, 10,000 cycles for series connection of each NO contact 10A, 400VDC, resistive, 10,000 cycles for series connection of each NO contact 10A, 200VDC, resistive, 10,000 cycles for each NO contact VDE: 0435 10A, 400VDC, resistive, 10,000 cycles for series connection of each NO contact 10A, 200VDC, resistive, 10,000 cycles for each NO contact FTR-J2 Series nDIMENSIONS Unit: mm nPC BOARD PATTERN Bottom view Unit: mm FTR-J2 Series nCIRCUIT lLoad sides and input sides (coil sides) for 10A, 450VDC Please refer to COIL DATA CHART 1 for nominal coil voltage Bottom view Note: Load sides have polarities (+) and (-). Input sides (coil sides) do not have polarities. lLoad sides and input sides (coil sides) for 10A, 200VDC Please refer to COIL DATA CHART 1 for nominal coil voltage Bottom view Note: Load sides have polarities (+) and (-). Input sides (coil sides) do not have polarities. FTR-J2 Series nCIRCUIT lLoad sides and input sides (coil sides) for 10A, 200VDC Please refer to COIL DATA CHART 2 for nominal coil voltage Bottom view Note: You can use each NO contact independently Load sides have polarities (+) and (-). Input sides (coil sides) do not have polarities. lLoad sides and input sides (coil sides) for 10A, 450VDC Please refer to COIL DATA CHART 2 for nominal coil voltage Bottom view Note: Synchronized with a signal to coils of the relay operate / release Load sides have polarities (+) and (-). Input sides (coil sides) do not have polarities. FTR-J2 Series RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder l Recommended solder paste Sn-3.0Ag-0.5Cu. Flow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-J2 Series Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. April 27, 2009.