Token FVR25W2.5KRK Fvr rheostat variable power resistor Datasheet

TOKEN
FVR Rheostat Variable Power Resistors
Rheostat Variable
Power Resistors
C-shaped Wirewound Variable Resistors - FVR Series
Rheostat, Variable Resistors
Control The Speed of a Motor
Preview
Token’s Power Variable Resistor FVR Series is a C-shaped
ceramic rod and wound with copper or chromium-alloy wire
as a resistance element. Except for the slide contact surface,
the entire component is coated with a high-temperature,
non-flammable resin. After cooling and drying, insulation
is applied through a high-temperature process. Then, a
centered rotating adjuster component is installed, which
slides along the resistance element and varies the resistance
to the desired value.
Variable Resistors are often called potentiometers in books
and catalogues. Variable FVR may be used as a rheostat
with two connections (the wiper and just one end of the
track) or as a potentiometer with all three connections in use.
Applications :
● Motor controller also use FVR Series as rheostats or potentiometer to control the speed of a motor by
limiting the flow of current through them.
● They are used in many small appliances such as blenders, mixers, fans, and power tools.
● FVR Rheostats Series are also used as test instruments to provide an accurate resistance value.
● While FVR can be used to control electric ovens and cooktops, thermostats are preferred because they
have additional parts which automatically adjust the current flow to maintain a constant temperature.
Features :
● Standard resistance tolerance is K(±10%). Closer tolerances are available upon request.
● 3 Wattage Rating styles to choose: 25W, 50W, and 100W.
● Wide Max. Resistance range: 5Ω ~ 5KΩ.
The FVR Series is RoHS compliant and lead free. For non-standard technical requirements and custom special
applications, please contact us.
Version 2010
http://www.token.com.tw/
rfq token.com.tw
01 of 03
TOKEN
FVR Rheostat Variable Power Resistors
(FVR) 25W - 100W Dimensions
J
E
A
H
B
D
I
C
Variable Resistors
Top View (FVR) Dimensions
Wattage
Rating
25W
50W
100W
A
2.5
4.2
4.2
B
3.2
4.2
4.2
C
22
28
42
K
G
F
Variable Resistors
Side View (FVR) Dimensions
D
3/8”
3/8”
3/8”
Dimensions(mm)
E
F
G
6x12
42
50
6x12
64
60
6x12
85
75
H
50
70
90
Variable Resistors
Bottom View (FVR) Dimensions
I
11
11
11
J
5
8
8
K
10
14
14
Weight
74/g
160/g
372/g
Resistance
Range(Ω)
5Ω-2.5KΩ
7Ω-3.5KΩ
10Ω-5KΩ
Application Notes
Determination of End Resistance Value of FVR, DQS, DSRA, DSRB, BSR, BSQ:
● Resistance Range means you can choose one maximum resistance value (End resistance value)
at one of FVR, DQS, DSRA, DSRB, BSR, BSQ VR (Variable Resistor) type.
● After End Resistance Value confirmed, the minimum resistance (start resistance value) will be
determined by depending on resistance of wire and wirewound type.
Power Rating of Variable Resistor:
The part Nunber formation of FVR, DQS, DSRA, DSRB, BSR, BSQ:
Product type
-
Rated Wattage
-
Resistance Value (Ω)
- Resistance Tolerance
Product type means one of FVR, DQS, DSRA, DSRB, BSR, BSQ.
Rated Wattage means power rating at End Resistance Value.
Resistance Value (Ω) means maximum resistance value (End Resistance Value).
Resistance Tolerance means precision range of End Resistance Value.
1. Power Rating of VR (Variable Resistor) is determined by the maximum resistance value
(End Resistance Value).
2. Resistance and Power Rating should be decreased while you are adjusting the screw.
02 of 03
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
FVR Rheostat Variable Power Resistors
Notes:
● Adjustability is 10% to 90% of full resistance value.
● Wattage is proportional to this adjusted resistance value.
Power Rating:
● Based on 25°C free air rating. The stated wattage rating applies only when the entire resistance is
in the circuit.
● Setting the lug at an intermediate point reduces the wattage rating by approximately the same
proportion.
● Example: If the lug is set at half resistance, the wattage is reduced by approximately one-half.
If you need current constant type or special specifications, please feel free to cntact us.
Performance Specifications
Test Item
Resistance tolerance
Insulation resistance
Dielectric withstanding
voltage
Terminal strength
Vibration
Load life
Full gyration angle
Flame retardation
Remarks
Test Methods
JIS-C-5261 5-1
JIS-C-5261 6-1 500VDC
JIS-C-5261 7-1 1000VDC 1 minute
Between terminal and axis
JIS-C-5261 6-5
3kg 30 seconds
JIS-C-5261 6-6 1.5m/m 10 ~ 50 ~ 10
Hz/min X-Y-Z 2 hours each
Characteristics
Resistance tolerance ±10%
100MΩ min
Free of appearance or structural irregularity
Free of appearance or structural irregularity
ΔR/R≤ ±(2%+0.1Ω)
Free of appearance or structural irregularity
ΔR/R≤ ±(2%+0.1Ω)
Free of appearance or structural irregularity
JIS-C-5261 7-7
ΔR/R≤ ±(5%+0.1Ω)
JIS-C-5261 6-1
300± 5°C
US UL-94 flame retardation test V-0 grade
100% - 600% rated wattage load
noncombustible
1. Resistance and resistance tolerance were tested in-house with micro resistance meter.
2. Coating refers to UL-certified data provided by supplier.
How to Order
FVR
25W
2.5KR
K




 Part Number: FVR
 Rated Power (W): 25W
 Resistance Tolerance (%)
50W
100W
 Resistance Value (Ω): Indicates resistance value
in units of ohms.
Code
K
Resistance Tolerance
±10%
Back to 1st Page - Power Rheostat Variable Resistors (FVR)
Version 2010
http://www.token.com.tw/
rfq token.com.tw
03 of 03
Similar pages