LVL1 FVT-2201 10/100base-tx to 100base-fx smf sc converter, 20km Datasheet

FVT-2201 하드웨어 버전: 1
10/100BASE-TX to 100BASE-FX SMF SC Converter,
20km
The FVT-2201 SMF SC media converter is able to convert network signals between copper and fiber-optic based
networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch
connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can
extend a network range up to 20km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link
Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as
converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The FVT-2201 is able to operate in temperatures from -10° up to 55° Celsius. The converter can be used as a
standalone unit or as a slide-in module to the CHV-2000 19-inch Converter Chassis, which can accommodate up to 14
units for use in a central wiring closet.
Key Features
-
Transfers data from 10/100Base-TX copper to fiber interfaces
Single-mode fiber with SC connector for transmission of up to 20km
Built-in LFP (Link Fault Pass-through) Technology
신뢰성 있는 데이터 전송을 위해 IEEE 802.3x 플로우 제어가 패킷 손실을 방지
www.level1.com
Page 1 of 4
-
Dip switches for customized configuration
Supports low-time lag transmission
Supports the transmission of extra-long packets up to 1.6KB
-10°C ~ 55°C operating temperature range
정상 작동
CVH-2000
14-Slot Media Converter Chassis
FVT-2401
10/100BASE-TX to 100BASE-FX SMF SC Converter, 40km
제품사양
System Specifications
Connectors and Cabling:
Fiber Duplex SC (20km); RJ-45 Port CAT-5 Twisted Pair cable
Auto MDI/MDI-X (Max to 100m) and Auto-Negotiation
Wavelength(nm):
1310nm
Indicator:
PWR, TX (FDX, 100, Link/Act), FX (102, Link/Act)
Transmission Method:
Store and forward (Default)
Power:
DC 5V/1A
Standards & Protocols:
IEEE 802.3 10-BASE-T, Ethernet
IEEE 802.3u 100-BASE-TX, Fast Ethernet
IEEE 802.3ab 1000BASE-T, Gigabit Ethernet
IEEE 802.3x Flow Control (full-duplex flow control)
IEEE802.3z 1000Base-SX/LX,
Physical Specifications
Dimensions (W x D x H mm):
71 x 94 x 26 mm
Weight (g):
420 g
Performance
Operating Distance:
20 km
Features
www.level1.com
Page 2 of 4
General:
DIP Switch 1: LFP function
DIP Switch 2: Transmission Mode
DIP Switch 3: Auto/Force the UTP port work mode
DIP Switch 4: 10/100M for UTP port
DIP Switch 5: Full/Half Duplex mode for UTP port
DIP Switch 6: Normally close
Environment
Temperature (°C):
Storage: -40 ~75 °C
Operating: -10 ~ 55 °C
Humidity (Non-condensing):
5 ~ 90 %
Others
Approval and Compliance:
CE, FCC
Deployment:
Desk, wall and chassis mounted
www.level1.com
Page 3 of 4
도표
Order Information
FVT-2201
Package Contents
Power Adapter
Quick Installation Guide
고해상도 이미지
CVH-2000
No responsibility for any errors or omissions. All mentioned brand names are registered trademarks and property of their owners.
Copyright © Digital Data Communications GmbH, Germany. All Rights Reserved.
www.level1.com
Powered by TCPDF (www.tcpdf.org)
Page 4 of 4
Similar pages