Ordering number : ENN7133 FW245 N-Channel Silicon MOSFET FW245 DC / DC Converter Applications Features • • • Package Dimensions Low ON-resistance. 4V drive. Ultrahigh-speed switching. unit : mm 2129 [FW245] 5 4 0.2 1.8max 1 6.0 4.4 0.3 8 Specifications 0.595 1.27 0.43 0.1 1.5 5.0 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 SANYO : SOP8 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 30 Gate-to-Source Voltage VGSS ±20 V 7 A Drain Current (DC) ID Drain Current (Pulse) V IDP PD PW≤10µs, duty cycle≤1% 52 A Mounted on a ceramic board (1200mm 2✕0.8mm) 1unit 1.7 W PT Tch Mounted on a ceramic board (1200mm2✕0.8mm) Channel Temperature Storage Temperature Tstg Allowable Power Dissipation Total Dissipation 2.0 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage V(BR)DSS IDSS IGSS VGS(off) yfs Forward Transfer Admittance Static Drain-to-Source On-State Resistance RDS(on)1 RDS(on)2 Conditions ID=1mA, VGS=0 VDS=30V, VGS=0 VGS=±16V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=7A Ratings min typ Unit max 30 V 1 µA ±10 µA 2.4 V 26 34 mΩ 39 55 mΩ 1.0 7 ID=7A, VGS=10V ID=4A, VGS=4.5V Marking : W245 10 S Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 11502 TS IM TA-2608 No.7133-1/4 FW245 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Input Capacitance Ciss pF Coss VDS=10V, f=1MHz VDS=10V, f=1MHz 550 Output Capacitance 170 pF Reverse Transfer Capacitance Crss VDS=10V, f=1MHz 90 pF Turn-ON Delay Time td(on) See specified Test Circuit. 9 ns Rise Time tr td(off) See specified Test Circuit. 73 ns See specified Test Circuit. 41 ns Turn-OFF Delay Time Fall Time tf Qg See specified Test Circuit. 54 ns VDS=10V, VGS=10V, ID=7A 10 nC Gate-to-Source Charge Qgs VDS=10V, VGS=10V, ID=7A 1.5 nC Gate-to-Drain “Miller” Charge Qgd VDS=10V, VGS=10V, ID=7A 1.0 Diode Forward Voltage VSD IS=7A, VGS=0 Total Gate Charge Switching Time Test Circuit 1.2 V Electrical Connection D1 VDD=15V 10V 0V nC 0.82 D1 D2 D2 VIN D VIN PW=10µs D.C.≤1% ID=7A RL=2.1Ω VOUT G P.G Top view 50Ω FW245 S S1 ID -- VDS 8 VGS=2.5V 4 5°C --25°C 3 5 3 2 2 1 1 C 4 6 25° 5 7 Ta= 7 Drain Current, ID -- A 5V V 3.0 6 0 0 ID -- VGS VDS=10V V 4.5 7 G2 9 3. Drain Current, ID -- A 8 8.0V 9 S2 10 6.0V 10.0V 10 G1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Drain-to-Source Voltage, VDS -- V 0.9 0 1.0 1.0 1.5 2.0 2.5 3.0 Gate-to-Source Voltage, VGS -- V RDS(on) -- VGS 60 0.5 IT00557 3.5 4.0 IT00558 RDS(on) -- Ta 60 55 Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Static Drain-to-Source On-State Resistance, RDS(on) -- mΩ Ta=25°C 50 45 ID=7.0A 40 4.0A 35 30 25 20 15 10 5V 50 =4. GS A, V 0 4. I D= 40 0V 10. S= , VG 7.0A 30 I D= 20 10 5 0 0 2 4 6 8 10 12 14 16 Gate-to-Source Voltage, VGS -- V 18 20 IT04012 0 --50 --25 0 25 50 75 100 Ambient Temperature, Ta -- °C 125 150 IT04013 No.7133-2/4 °C --25 Ta= C 25° 3 75°C 2 1.0 7 5 3 2 0.1 0.1 2 3 5 7 2 1.0 3 5 Drain Current, ID -- A 10 IT00561 0.1 7 5 3 2 0.01 7 5 3 2 0.001 0.2 Ciss 9 Gate-to-Source Voltage, VGS -- V 5 3 2 Coss 100 0.4 0.5 Crss 7 5 3 2 0.6 0.7 0.8 0.9 1.0 1.1 1.2 IT00562 VGS -- Qg 10 f=1MHz 7 0.3 Diode Forward Voltage, VSD -- V Ciss, Coss, Crss -- VDS 1000 Ciss, Coss, Crss -- pF 7 1.0 7 5 3 2 25°C 2 VGS=0 Ta=7 5°C 3 10 7 5 IF -- VSD 10 7 5 3 2 VDS=10V --25° C yfs -- ID 100 7 5 Forward Current, IF -- A Forward Transfer Admittance, yfs -- S FW245 VDS=10V ID=7.0A 8 7 6 5 4 3 2 1 0 0 10 0 5 10 15 20 Drain-to-Source Voltage, VDS -- V 2 Drain Current, ID -- A Switching Time, SW Time -- ns 100 7 5 3 2 3 td(off) tr 3 2 td(on) 10 7 5 tf 3 2 1.0 0.1 2 3 5 7 2 1.0 3 Drain Current, ID -- A 5 7 10 IT04015 PD -- Ta 2.5 2 3 4 5 6 7 8 9 Total Gate Charge, Qg -- nC VDD=15V VGS=10V 100 7 5 1 IT00563 SW Time -- ID 1000 7 5 Allowable Power Dissipation, PD -- W 30 25 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 10 IT04014 ASO IDP=52A <10µs 1m s 10 ID=7A 10 DC 100µs ms 0m s op era tio n Operation in this area is limited by RDS(on). Ta=25°C Single pulse Mounted on a ceramic board (1200mm2✕0.8mm) 1unit 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain-to-Source Voltage, VDS -- V 2 3 5 7 100 IT04016 Mounted on a ceramic board (1200mm2✕0.8mm) 2.0 1.7 To ta 1.5 ld iss 1u nit 1.0 ipa tio n 0.5 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT04017 No.7133-3/4 FW245 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of January, 2002. Specifications and information herein are subject to change without notice. PS No.7133-4/4