ETC1 FW5018-760-NC 50 watt ac adapter Datasheet

FW50 series
50 Watt AC Adapter
5.0" [127.0 mm]
3.0" [76.2 mm]
1.30" [33.0 mm]
Features
Electrical Specifications
Wide range AC input
Fully regulated output
High efficiency
5 year warranty
Input
Voltage................................ 100 - 240 VAC
Current................................ 1.0 Amp @ 100 VAC
Frequency........................... 47 - 63 Hz
AC cord............................... Optional
Input connector................... 3 Pin IEC 320 input receptacle
Environmental
Operating temperature.......... 0 C to 40 C
Storage temperature............. -55 C to 85 C
Weight = 0.8 lbs
EMI
Meets FCC class B, CISPR 22 class B
Safety
UL
cUL
Nemko
CE
UL1950
CSA 22.2 NO. 950
EN 60950
Marked
Output
Line regulation.................... TYP +/- 1%
Load regulation................... TYP +/- 5%
Set point.............................. +/- 3% at 60% load
Hold up time........................ 20 ms min at full load, 115 VAC
Over voltage protection....... Built-in
Over current protection....... Built-in
Short circuit protection........ Pulsing mode, auto recovery
Efficiency............................. 80% min at full load and 115 VAC
Transient response............. 2 ms for 50% load change typical
Ripple/noise (Vp-p)............... +/- 1% (20 MHz bandwidth)
Output connector................ Barrel type (5.5 x 2.5 x 9.5 mm)
Polarity
Com
+V
Model No.
FW5012-760-NC
Voltage Power Current
12V
50W
4.15A
FW5018-760-NC
18V
50W
2.75A
FW5024-760-NC
24V
50W
2.10A
Rev 0404
Elpac Power Supplies 1562 Reynolds Ave. Irvine, CA 92614 USA TEL +1 949-476-6070 www.elpac.com [email protected]
Similar pages