Hirose FX10A-168P-SV3 10gbps 0.5mm pitch stacking connector Datasheet

10+Gbps 0.5mm pitch Stacking Connectors
FX10 Series
Electrical Interface for the OIF 100G Long-Haul DWDM Transmission Module (MSA-100GLH)
■Mechanical Features
● 0.5mm Pitch
● Stacking Height : 4 ~ 8mm
● Number of Contacts
With ground plate type : 80 / 100 / 120 / 140
Without ground plate type : 96 / 120 / 144 / 168
● Improved Transmission Efficiency
Between Boards
Transmission characteristics have been improved through a
design that fixes ground plates to both sides of the header
and receptacle.
■With GND Plate Type
● 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the
ground plate SMT connected to the board. The ground
stability achieved serves to reduce noise.
Ground
plate
● Metal Fittings for Added Solder Weld
Strength
Signal contact
Housing
Metal fittings provide greater adhesion to the board,
protecting against peeling. The unique connector design
provides a connection between the fitting and the ground
plate for a stronger ground.
m
5m
0.7
Metal fitting
Ground plate and metal
fitting make contact
mm
0.5
m
5m
0.7
● Suited to High-Density Applications
The signal contact pitch of 0.5 mm produces a smaller
connector utilizing less board area for mounting.
●Cut Section
● High contact reliability
Effective mating length is 1.1 mm for signal contacts.
● Optional Ground Plate
An alternate style without the ground plate is available. The
space provided by the ground plate removal has been filled
with additional signal contacts.
■Signal Integrity Features
●Differential Impedance
The differential impedance is within 100 +/- 10 ohms
at 30ps rise time (20% to 80%).
60
115
50
110
40
105
Z (Ohm)
The insertion-loss-to-crosstalk-ratio (ICR) with fiveaggressor differential FEXT meets the extrapolated
IEEE 802.3ap specification for 10+Gbps.
ICR (dB)
●Insertion-Loss-to-Crosstalk-Ratio(ICR)
30
100
20
95
10
0
ICR
ICR spec
0
2
90
S(3,3)
4
6
Frequency (GHz)
8
85
10
0
200
400
600
Time (ps)
800
1000
■Stack Height
●With ground plate
FX10#-*S/*-SV
FX10#-*P/*-SV FX10#–*P/*–SV1
4mm
5mm
( )
Headers
Receptacles
●Without ground plate
Headers
Receptacles
FX10#-*S-SV
FX10#-*P-SV FX10–*P–SV1 FX10#-168P-SV2 FX10#-168P-SV3 FX10#-168P-SV4
4mm
5mm
6mm
7mm
8mm
(H):Reference dimension
2011.01w
1
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
MSA-100GLH Electrical Interface
■Product Specifications (Rating)
Rating
Rated current
Note 1
Operating temperature
range
-55 to 85ç
Storage temperature
range
-40 to +60ç
(Note 2)
Operating humidity
range
Relative humidity 95% max
(No condensation)
Storage humidity
range
40 to 70%
(Note 2)
Rated voltage
50 V AC
Note 1: Refer to FX10-168pin derating curves from test reports TR570E-20587.
Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are suited to the non-conducting condition following board assembly.
Note 3: Other information are shown in General Product Specifications.
■Receptacles without ground plate
Unit: mm
41.5±0.2
(P=0.5)
No.a2
A
140
No.b1
No.b2
No.b83
No.b84
49.1±0.3
(0.6)
3.2±0.3
7.3±0.3
7.1±0.2
2.5±0.2
No.a1
0.2±0.05
No.a84
No.a83
Guidepost
44.4±0.1
CL No.
Number of Contacts
Signal
Remarks
570-0244-7-**
570-0254-0-**
168
With guideposts
Without guideposts
Part No.
FX10A-168S-SV (**)
FX10B-168S-SV (**)
(Ø1)
(Ø1)
[Specifications number] -✽ ✽, (✽ ✽)
(83): Embossed tape packaging / AuP 0.76µm
(93): Tray packaging / AuP 0.76µm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
■Recommended Land Pattern
Dimensions(Metal Mask Dimensions)
■Board-to-Board Distance
HEADER CONNECTOR
FX10A(B)-168P-SV*(83)
SOLDER
Recommended metal mask thickness: 0.15mm
1
Ø1.2±0.05
B
1
1
2
Ø1.2±0.05
No.a84
No.a83
(A)
(1.1):MATING LENGTH
PCB
49.5 +0.1
0
0
46.3 -0.1
44.4±0.05
41.5±0.05
0.5±0.03
No.a1
No.a2
3
0
4.5 -0.1
1.45±0.05
Note
2
No.b2
No.b1
No.b83
No.b84
7.7 +0.1
0
3.1+0.1
0
PCB
RECEPTACLE CONNECTOR
FX10A(B)-168S-SV(83)
FX10A(B)-168P-SV(83)
FX10A(B)-168P-SV1(83)
FX10A(B)-168P-SV2(83)
FX10A(B)-168P-SV3(83)
FX10A(B)-168P-SV4(83)
0.3±0.03(LAND WIDTH)
0.25±0.03(METAL MASK)
1 Not required in products without guideposts.
Note
1
2
3
SOLDER
3
FX10A(B)-168S-SV(83)
1 (A)
2 B
4
4.3±0.127
5.3±0.127
5
6.0±0.127
6
7.0±0.127
7
8.0±0.127
8
Stacking height from lead to lead (reference dimensions)
Board-to-board distance
Stencil (metal mask) shall be based on Hirose's recommended aperture and thickness.
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
MSA-100GLH Electrical Interface
■Headers without ground plate
41.5±0.2
No.a84
No.a83
0.2±0.05
A
5.9±0.3
5.7±0.2
2.5±0.2
140
No.b1
(P=0.50)
No.b2
No.a83
No.a84
(0.6)
A±0.3
No.a1
No.a2
49.1±0.3
(Ø1)
(Ø1)
Guidepost
44.4±0.1
Unit: mm
Part No.
CL No.
FX10A-168P-SV (**)
FX10A-168P-SV1 (**)
FX10A-168P-SV2 (**)
FX10A-168P-SV3 (**)
FX10A-168P-SV4 (**)
FX10B-168P-SV (**)
FX10B-168P-SV1 (**)
FX10B-168P-SV2 (**)
FX10B-168P-SV3 (**)
FX10B-168P-SV4 (**)
570-0044-8-**
570-0144-2-**
570-0302-1-**
570-0304-7-**
570-0306-2-**
570-0054-1-**
570-0154-6-**
570-0303-4-**
570-0305-0-**
570-0307-5-**
[Specifications number] -✽ ✽, (✽ ✽)
(83): Embossed tape packaging / AuP 0.76µm
Number of Contacts
Signal
A
168
3.5
4.5
5.25
6.25
7.25
3.5
4.5
5.25
6.25
7.25
Quantity/Reel
(Note 3)
1,000
1,000
900
800
700
1,000
1,000
900
800
700
Remarks
With guideposts
Without guideposts
(93): Tray packaging / AuP 0.76µm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel.
Note 4: Using multiple connectors between identical boards is not recommended.
■Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
49.5 +0.1
0
0
46.3-0.1
44.4±0.05
Ø1.2±0.05
41.5±0.05
1
No.b84
No.b83
No.a2
No.a1
No.a83
No.a84
6.3 +0.1
0
No.b1
No.b2
3.1+0.1
0
1
1.45±0.05
0
2.3 -0.1
0.5±0.03
Ø1.2±0.05
0.3±0.03(LAND PATTERN)
0.25±0.03(METAL MASK)
Note 1 Not required in products without guideposts.
3
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Signal integrity
● Pin assignment
To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSGSG pin assignment is recommended.
(G=ground and S=signal)
GSGSG
signal
Diff pair
ground
● Impedance
The differential impedance is 100 +/- 10 ohm for FX10 at 30 ps rise time (20% to 80%).
5 mm (without GND)
115
115
110
110
105
105
Z (Ohm)
Z (Ohm)
4 mm (without GND)
100
100
95
95
90
90
S(3,3)
85
0
200
400
600
Time (ps)
800
S(3,3)
85
1000
0
200
800
115
115
110
110
105
105
100
95
100
95
90
90
S(3,3)
S(3,3)
85
1000
5 mm (with GND)
Z (Ohm)
Z (Ohm)
4 mm (with GND)
400
600
Time (ps)
0
200
400
600
Time (ps)
800
1000
85
0
200
400
600
Time (ps)
800
1000
● Propagation delay
The propagation delay is 62 and 67 ps for FX10 of 4mm and 5mm height (with and without GND), respectively.
4
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
● Insertion loss
The differential insertion loss crosses 1 dB at 10.8 and 9.2 GHz for FX10 of 4mm and 5mm height, respectively.
4 mm (without GND)
5 mm (without GND)
S (dB)
0
S (dB)
0
IL
0
5
10
Frequency (GHz)
15
IL
20
0
4 mm (with GND)
5
10
Frequency (GHz)
15
20
5 mm (with GND)
S (dB)
0
IL
0
5
10
Frequency (GHz)
15
20
● Return loss
The differential return loss meets the IEEE 802.3ap specification to 20 + and 13.5 GHz for FX10 of 4mm and 5mm height,
respectively.
4 mm (without GND)
5 mm (without GND)
RL (dB)
0
RL (dB)
0
RL
RL Spec
RL
RL Spec
0
5
10
Frequency (GHz)
15
20
0
4 mm (with GND)
5
10
Frequency (GHz)
15
20
5 mm (with GND)
RL (dB)
0
RL (dB)
0
RL
RL Spec
RL
RL Spec
0
5
10
Frequency (GHz)
15
20
0
5
10
Frequency (GHz)
15
20
5
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
● Near-end crosstalk (NEXT)
The staggered GSGSG pin assignment results in low differential NEXT between neighboring pairs.
4 mm (without GND)
5 mm (without GND)
0
0
NEXT
S (dB)
S (dB)
NEXT
0
5
10
Frequency (GHz)
15
0
20
5
4 mm (with GND)
10
Frequency (GHz)
15
20
5 mm (with GND)
0
0
S (dB)
NEXT
S (dB)
NEXT
0
5
10
Frequency (GHz)
15
20
0
5
10
Frequency (GHz)
15
20
● Far-end crosstalk (FEXT)
The staggered GSGSG pin assignment results in low differential FEXT between neighboring pairs.
4 mm (without GND)
5 mm (without GND)
0
0
FEXT
S (dB)
S (dB)
FEXT
0
5
10
Frequency (GHz)
15
0
20
4 mm (with GND)
10
Frequency (GHz)
15
20
5 mm (with GND)
0
0
FEXT
S (dB)
FEXT
S (dB)
0
6
5
5
10
Frequency (GHz)
15
20
0
5
10
Frequency (GHz)
15
20
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
● Insertion-loss-to-crosstalk ratio (ICR)
The insertion-loss-to-crosstalk ratio (ICR) with five-aggressor differential FEXT meets the extrapolated IEEE 802.3ap specification
to 10+ Gbps.
5 mm (without GND)
60
50
50
40
40
ICR (dB)
ICR (dB)
4 mm (without GND)
60
30
20
20
10
0
10
ICR
ICR spec
0
2
4
6
Frequency (GHz)
8
0
10
4 mm (with GND)
60
50
50
40
40
30
20
0
2
4
6
Frequency (GHz)
8
10
8
10
5 mm (with GND)
30
20
10
0
ICR
ICR spec
60
ICR (dB)
ICR (dB)
30
10
ICR
ICR spec
0
2
4
6
Frequency (GHz)
8
10
0
ICR
ICR spec
0
2
4
6
Frequency (GHz)
7
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■General Product Specifications
Rated current
0.3 A
Operating temperature range
-55 to 85ç (Note 1)
Rated voltage
50 V AC
Operating humidity range
Relative humidity 95% max
(No condensation)
Rating
Storage temperature range -10 to +60ç (Note 2)
Storage humidity range
40 to 70% (Note 2)
Item
Requirements
Conditions
1. Insulation resistance 100 M ohm min
Measured at 100 V DC
2. Voltage resistance No flashover or breakdown
150 V AC applied for one minute
3. Contact resistance 60 m ohm max
Measured at 100 mA
No electrical discontinuity for 1µs min
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10
4. Vibration
No damage, cracks, or parts looseness
cycles each
No electrical discontinuity for 1µs min
Acceleration of 490 m/s2, 11 ms duration, sine half-wave
5. Shock
waveform, for 3 cycles in the both directions of each of the 3 axes
No damage, cracks, or parts looseness
6. Damp heat
Contact resistance of 70 m ohm max, insulation resistance of
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
(Steady state)
100 M ohm min, no damage, cracks, or parts looseness
Contact resistance of 70 m ohm max, insulation resistance of Temperature: -55ç → 15 to 35ç → 85ç → 15 to 35ç
7. Temperature cycle
100 M ohm min, no damage, cracks, or parts looseness
Time: 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min. for 5 cycles
Contact resistance of 70 m ohm max
8. Durability
50 times
No damage, cracks, or parts looseness
9. Resistance to
Reflow: At the recommended temperature profile
No melting of resin portion which affects performance
Soldering iron temperature: 360ç for 5 seconds
soldering heat
Note 1: Includes temperature rise caused by current flow.
Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are suited to the non-conducting condition following board assembly.
Note 3: Information contained in this catalog represents general requirements for this series. Contact us for the drawings and specifications for a
specific part number shown.
■Materials
Part
Material
Process
Beige
LCP
Insulator
Contact Area: Gold plating
Header
Lead Area: Tin plating
Phosphor bronze
Contacts
Contact Area: Gold plating
Receptacle
---
Lead Area: Flash plating
Ground plate
Phosphor bronze
Tin plating
---
Metal fitting
Phosphor bronze
Tin plating
---
■Ordering Information
FX10 # - ✽ P / ✽ - SV 1 (✽ ✽))
1
2
4
5
6
7
3
1 Series name : FX10
2 Form symbol
A : With guide post
B : Without guide post
3 Number of contacts
With ground plate
Signal/Ground: 80/8, 100/10, 120/12,
140/14
Without ground plate
Signal: 96, 120, 144, 168
8
Notes
UL94V-0
4 Connector type
P : Header
S : Receptacle
5 Contact form
SV : Straight SMT
6 Product height
Blank : Standard
1
: Standard + 1mm
7 Packaging classification
Blank, (71) : Tray packaging
(21), (91): Embossed tape packaging
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Headers with ground plate
●4mm Stacking Height
Unit: mm
Number of Contacts
Part No.
CL No.
A
B
C
D
E
F
FX10A- 80P/ 8-SV(**)
CL570-0001-5-**
80
FX10A-100P/10-SV(**)
CL570-0002-8-**
8
23.5
18
31.1
26.4
31.5
28.3
FX10A-120P/12-SV(**)
CL570-0003-0-**
100
10
29.5
24
37.1
32.4
37.5
34.3
120
12
35.5
30
43.1
38.4
43.5
40.3
FX10A-140P/14-SV(**)
FX10B- 80P/ 8-SV(**)
CL570-0004-3-**
140
14
41.5
36
49.1
46.3
80
8
23.5
18
31.1
44.4
—
49.5
CL570-0021-2-**
31.5
28.3
FX10B-100P/10-SV(**)
CL570-0022-5-**
100
10
29.5
24
37.1
—
37.5
34.3
FX10B-120P/12-SV(**)
CL570-0023-8-**
120
12
35.5
30
43.1
—
43.5
40.3
FX10B-140P/14-SV(**)
CL570-0024-0-**
140
14
41.5
36
49.1
—
49.5
46.3
Signal Ground
Remarks
With guideposts
Without guideposts
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
■Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
3 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
4 Not required in products without guideposts.
9
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Headers with ground plate
●5mm Stacking Height
A±0.2
(0.5)
0.2±0.05
5.9±0.3
(5.7)
2.5±0.2
A
0.5±0.05
(0.75)
(0.75)
(6)
B±0.2
4.5±0.3
C±0.3
(0.6)
2-(Ø1)
D±0.1
Guidepost
Unit: mm
Number of Contacts
Part No.
CL No.
A
B
C
D
E
F
FX10A- 80P/ 8-SV1(**)
CL570-0101-0-**
80
8
23.5
18
31.1
26.4
31.5
28.3
FX10A-100P/10-SV1(**)
CL570-0102-2-**
FX10A-120P/12-SV1(**)
CL570-0103-5-**
100
10
29.5
24
37.1
32.4
37.5
34.3
120
12
35.5
30
43.1
38.4
43.5
40.3
FX10A-140P/14-SV1(**)
FX10B- 80P/ 8-SV1(**)
CL570-0104-8-**
140
14
41.5
36
49.1
46.3
80
8
23.5
18
31.1
44.4
—
49.5
CL570-0121-7-**
31.5
28.3
FX10B-100P/10-SV1(**)
CL570-0122-0-**
100
10
29.5
24
37.1
—
37.5
34.3
FX10B-120P/12-SV1(**)
CL570-0123-2-**
120
12
35.5
30
43.1
—
43.5
40.3
FX10B-140P/14-SV1(**)
CL570-0124-5-**
140
14
41.5
36
49.1
—
49.5
46.3
Signal Ground
Remarks
With guideposts
Without guideposts
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
■Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
3 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
4 Not required in products without guideposts.
10
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Receptacles with ground plate
A±0.2
(0.5)
0.2±0.05
7.3±0.3
(7.1)
2.5±0.2
A
0.5±0.05
(0.75)
(6)
(0.75)
(0.6) 3.2±0.3
B±0.2
C±0.3
2-(Ø1)
Guidepost
D±0.1
Unit: mm
Number of Contacts
Part No.
CL No.
A
B
C
D
E
F
FX10A- 80S/ 8-SV(**)
CL570-0201-4-**
80
8
23.5
18
31.1
26.4
31.5
28.3
FX10A-100S/10-SV(**)
CL570-0202-7-**
FX10A-120S/12-SV(**)
CL570-0203-0-**
100
10
29.5
24
37.1
32.4
37.5
34.3
120
12
35.5
30
43.1
38.4
43.5
40.3
FX10A-140S/14-SV(**)
FX10B- 80S/ 8-SV(**)
CL570-0204-2-**
140
14
41.5
36
49.1
46.3
80
8
23.5
18
31.1
44.4
—
49.5
CL570-0221-1-**
31.5
28.3
FX10B-100S/10-SV(**)
CL570-0222-4-**
100
10
29.5
24
37.1
—
37.5
34.3
FX10B-120S/12-SV(**)
CL570-0223-7-**
120
12
35.5
30
43.1
—
43.5
40.3
FX10B-140S/14-SV(**)
CL570-0224-0-**
140
14
41.5
36
49.1
—
49.5
46.3
Signal Ground
Remarks
With guideposts
Without guideposts
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
■Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
3 Not required in products without guideposts.
11
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Headers without ground plate
●4mm Stacking Height
A±0.2
(5.7 )
2.5 ±0.2
0.2 ±0.05
3.5±0.3
5.9 ±0.3
( 0.5 )
(0.6 )
B±0.3
2-(Ø1)
Guidepost
C±0.1
Unit: mm
Number of Contacts
Part No.
CL No.
A
B
C
D
E
FX10A- 96P-SV(**)
CL570-0041-0-**
96
23.5
31.1
26.4
31.5
28.3
FX10A-120P-SV(**)
FX10A-144P-SV(**)
CL570-0042-2-**
120
29.5
37.1
32.4
37.5
34.3
CL570-0043-5-**
144
35.5
43.1
38.4
43.5
40.3
FX10A-168P-SV(**)
CL570-0044-8-**
168
41.5
49.1
46.3
CL570-0051-3-**
96
23.5
31.1
44.4
—
49.5
FX10B- 96P-SV(**)
31.5
28.3
FX10B-120P-SV(**)
CL570-0052-6-**
120
29.5
37.1
—
37.5
34.3
FX10B-144P-SV(**)
CL570-0053-9-**
144
35.5
43.1
—
43.5
40.3
FX10B-168P-SV(**)
CL570-0054-1-**
168
41.5
49.1
—
49.5
46.3
Signal
Remarks
With guideposts
Without guideposts
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
■Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
D +0.1
0
0
E -0.1
2 Ø1.2 ±0.05
6.3 +0.1
0
3.1 +0.1
0
1.45 ±0.05
0.5 ±0.03
0
4.1 -0.1
A ±0.05
2 Ø1.1 ±0.05
0
2 -0.1
1
C ±0.05
0.3 ±0.03(Land)
0.25±0.03(Metal mask)
Note 1 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
12
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Headers without ground plate
●5mm Stacking Height
A ±0.2
( 5.7 )
2.5 ±0.2
0.2 ±0.05
4.5±0.3
5.9 ±0.3
( 0.5 )
(0.6 )
B ±0.3
2-(Ø 1)
Guidepost
C ±0.1
Unit: mm
Number of Contacts
Part No.
CL No.
A
B
C
D
E
FX10A- 96P-SV1(**)
CL570-0141-4-**
96
23.5
31.1
26.4
31.5
28.3
FX10A-120P-SV1(**)
FX10A-144P-SV1(**)
CL570-0142-7-**
120
29.5
37.1
32.4
37.5
34.3
CL570-0143-0-**
144
35.5
43.1
38.4
43.5
40.3
FX10A-168P-SV1(**)
CL570-0144-2-**
168
41.5
49.1
46.3
CL570-0151-8-**
96
23.5
31.1
44.4
—
49.5
FX10B- 96P-SV1(**)
31.5
28.3
FX10B-120P-SV1(**)
CL570-0152-0-**
120
29.5
37.1
—
37.5
34.3
FX10B-144P-SV1(**)
CL570-0153-3-**
144
35.5
43.1
—
43.5
40.3
FX10B-168P-SV1(**)
CL570-0154-6-**
168
41.5
49.1
—
49.5
46.3
Signal
Remarks
With guideposts
Without guideposts
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
■Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
D +0.1
0
0
E -0.1
2 Ø1.2 ±0.05
6.3 +0.1
0
3.1 +0.1
0
1.45 ±0.05
0.5 ±0.03
0
4.1 -0.1
A ±0.05
2 Ø1.1 ±0.05
0
2 -0.1
1
C ±0.05
0.3 ±0.03(Land)
0.25±0.03(Metal mask)
Note 1 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
13
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Receptacles without ground plate
A±0.2
B±0.3
3.2±0.3
( 7.1 )
0.2 ±0.05
2.5 ±0.2
7.3 ±0.3
( 0.5 )
( 0.6 )
2-(Ø1)
C±0.1
Guidepost
Unit: mm
Number of Contacts
Part No.
CL No.
A
B
C
D
E
FX10A- 96S-SV(**)
CL570-0241-9-**
96
23.5
31.1
26.4
31.5
28.3
FX10A-120S-SV(**)
FX10A-144S-SV(**)
CL570-0242-1-**
120
29.5
37.1
32.4
37.5
34.3
CL570-0243-4-**
144
35.5
43.1
38.4
43.5
40.3
FX10A-168S-SV(**)
CL570-0244-7-**
168
41.5
49.1
46.3
CL570-0251-2-**
96
23.5
31.1
44.4
—
49.5
FX10B- 96S-SV(**)
31.5
28.3
FX10B-120S-SV(**)
CL570-0252-5-**
120
29.5
37.1
—
37.5
34.3
FX10B-144S-SV(**)
CL570-0253-8-**
144
35.5
43.1
—
43.5
40.3
FX10B-168S-SV(**)
CL570-0254-0-**
168
41.5
49.1
—
49.5
46.3
Signal
Remarks
With guideposts
Without guideposts
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
■Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
D +0.1
0
0
E -0.1
C±0.05
Ø1.2±0.05 1
A±0.05
1.45±0.05
Note 1 Not required in products without guideposts.
14
7.7 +0.1
0
0
4.5 -0.1
0.5±0.03
3.1 +0.1
0
1 Ø1.1±0.05
0.3±0.03(Land)
0.25±0.03(Metal mask)
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Embossed Carrier Tape Dimensions
Unit: mm
0
Ø1.5 +0.1
12±0.1
4±0.1
1.75±0.1
●Headers
2 ±0.1
(D)
0.9
Insertion Connector
B
C
FX10#- 80P/ 8-SV
B±0.1
C±0.3
A±0.1
FX10#-120P/12-SV
(6.2)
(6.6)
FX10#- 96P
-SV
20.2 40.4 44
FX10#-120P
-SV
FX10#-144P
-SV
FX10#-168P
-SV
0.2 ±0.05
+0.05
Ø1.5
2 ±0.1
1.75±0.1
+0.1
0
●Receptacles
( 3.5)
( 0.4)
0.9
3.8
F
G
64
76.5 81.5
45.5 50.5
59
26.2 52.4 56
34.2 68.4 72
76.5 81.5
45.5 50.5
59
26.2 52.4 56
FX10#- 96P
-SV1 20.2 40.4 44
FX10#-120P
-SV1
FX10#-144P
-SV1
FX10#-168P
-SV1 34.2 68.4 72
4.8
64
76.5 81.5
45.5 50.5
59
26.2 52.4 56
330
64
FX10#- 80P/ 8-SV1 20.2 40.4 44
FX10#-140P/14-SV1 34.2 68.4 72
R0.75 0
59
26.2 52.4 56
34.2 68.4 72
FX10#-120P/12-SV1
4±0.1
E
45.5 50.5
20.2 40.4 44
FX10#-140P/14-SV
FX10#-100P/10-SV1
12±0.1
D
(0.4)
FX10#-100P/10-SV
Unreeling direction
A
370
64
76.5 81.5
Note: There is no polarity in terms of embossed tape
packaging for this product.
A±0.1
Unit: mm
B±0.1
C±0.3
Insertion Connector
FX10#- 80S/ 8-SV
FX10#-100S/10-SV
FX10#-120S/12-SV
0.2 ±0.05
Unreeling direction
(7.6)
(8)
A
B
C
E
F
G
20.2 40.4 44 45.5 50.5
26.2 52.4 56
59
64
FX10#-140S/14-SV
34.2 68.4 72 76.5 81.5
FX10#- 96S
-SV
20.2 40.4 44 45.5 50.5
FX10#-120S
-SV
FX10#-144S
-SV
FX10#-168S
-SV
26.2 52.4 56
59
330
64
34.2 68.4 72 76.5 81.5
Note: There is no polarity in terms of embossed tape
packaging for this product.
+0.05
R0.75 0
Ø13±0.5
(Ø80)
(G)
●Reel Dimensions
(E)
(F)
15
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
■Recommended Temperature Profile
HRS test Conditions
Test board Glass epoxy 161mm∞100mm∞1.6mm thick
Solder method
:Reflow
Solder composition
:Paste,
Metal mask
:0.15mm thick
Reflow cycles
:2 cycles
96.5%Sn/3%Ag/0.5%Cu
The temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type,
volume/thickness and board size/thickness. Consult your
solder paste and equipment manufacturer for specific
recommendations.
■Washing Conditions
Organic Solvent Cleaning
Solvent
IPA (Isopropyl alcohol)
HCFC (Hydrochlorofluorocarbon)
Room temperature washing Heated washing
Yes
Yes
Yes
Yes
Water Type Cleaning
When using water based cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the
documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
Cleaning Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the
deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed.
■Connector Handling Precautions
1. Allowable Creepage Dimensions at Time of Mating
The effective mating length of this product is 1.1 mm for the signal portion and 1 mm for the ground portion. The creepage of the
header and receptacle at the time of mating should be within 0.5 mm of the completely mating condition.
2. Retension of Boards
Avoid the support of boards by connectors alone and adopt a locking measure that does not rely on the connectors.
3. Solder Repair
Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair.
This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into
consideration prior to connector washing.
4. Miscellaneous
·Note that excessive twisting while inserting or withdrawing connectors will cause damage.
·The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance.
16
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
NOTES :
17
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
NOTES :
18
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
NOTES :
19
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : 1-805-522-7958
Fax : 1-805-522-3217
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. North California Office
20400 Stevens Creek Blvd., Ste 250, Cupertino,
CA 95014
Phone : 1-408-253-9640
Fax : 1-408-253-9641
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
37677 Professional Center Drive, Suite #100C
Livonia, MI 48154
Phone : 1-734-542-9963
Fax : 1-734-542-9964
http://www.hiroseusa.com
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : 49-711-4560-02-1
Fax : 49-711-4560-02-299
http://www.hirose.de
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : 31-20-6557460
Fax : 31-20-6557469
http://www.hiroseeurope.com
UK:
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : 44-1908-369060
Fax : 44-1908-369078
http://www.hirose.co.uk
CHINA:
HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : 86-10-5165-9332
Fax : 86-10-5908-1381
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1501-02, Cross Tower Building, 318 Fuzhou Road,
Huang Pu District, Shanghai 200001
Phone : 86-21-6391-3355
Fax : 86-21-6335-0767
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : 86-755-8207-0851
Fax : 86-755-8207-0873
http://www.hirose-china.com.cn
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Unit 1102 A&B, Energy Plaza, 92 Granville Road,
Tsim Sha Tsui East, Kowloon
Phone : 852-2803-5338
Fax : 852-2591-6560
http://www.hirose-hongkong.com.hk
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : 886-2-2555-7377
Fax : 886-2-2555-7350
http://www.hirose-taiwan.com.tw
SINGAPORE:
HIROSE ELECTRIC CO., LTD.
10 Anson Road #26-16 International Plaza 079903
Phone : 65-6324-6113
Fax : 65-6324-6123
http://www.hirose-singapore.com.sg
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : 82-31-496-7000,7124
Fax : 82-31-496-7100
http://www.hirose.co.kr
®
20
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 01/2011. Contents are subject to change without notice for the purpose of improvements.
Similar pages