Hirose FX6A-40P-0.8SV 0.8mm pitch stacking height 5 to 9mm connector Datasheet

0.8mm Pitch Stacking Height 5 to 9mm Connector
FX6 Series
Stacking Height: 5 to 9mm
5~9mm
Mounting area 50% OFF, compared with the half pitch connector
Half pitch connector
(FX2 series)
FX6 series
(If compared with 60 contacts)
■Features
1. Stacking Height 5 to 9mm
4. Automatic Mounting
The board to board stacking height can be set at every
millimeter between 5 and 9mm.
2. Effective Contact Length 1.7mm
The standard packaging specification specifies the stick
package, considering the automatic mount, while the emboss
package can also correspond to the connector with less than
80 contacts. (However, the product is limited to 80 contacts.)
Despite the low profile type connector, the connector has the
1.7mm long effective contact length and provides a margin 5. SMT Coplanarity
The lead coplanarity on the SMT soldered area is maintained
sufficient to contact.
with the high accuracy of less than 0.1mm.
3. Mating Guide
The self-alignment for mating action exhibits a high guide
level at ± 1mm, and makes the mating process easier by
providing the guide rib.
■Applications
Note PC, business equipments such as handy terminals, and other equipment which require miniaturization or light-weight.
■Product Specifications
Rating
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
5. Humidity (Steady state)
Current rating 0.5A
Operating Temperature Range -55ç to +85ç Note 1.
Storage Temperature Range -10ç to +60ç Note 2.
Voltage rating 100V AC
Operating Humidity Range 40% to 80%
Storage Humidity Range 40% to 70%
Specification
100M ohms min
Condition
40m ohms max.
250V DC
300V AC/1 minute
100mA
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
No flashover or insulation breakdown.
Contact resistance: 50m ohms max.
Insulation resistance: 100m ohms min.
Contact resistance: 50m ohms max:
6. Temperature Cycle
Insulation resistance: 100m ohms min.
7. Durability (Mating/un-mating) Contact resistance: 50m ohms max.
8. Resistance to Soldering
No deformation of components affecting performance.
heat
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes 15 to 35ç: 2 to 3 minutes
(-85ç: 30 minutes 15 to 35ç: 2 to 3minutes)5 cycles
100 cycles
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
A213
■Material
Part
Material
Insulation
Finish
PPS
Header Contact
Remarks
Light brown
Phosphor bronze
Receptacle Contact
UL94V-0
Contact area
Gold plated
————
Lead area
Tin-lead plated
————
Note : The black dots on the insulater will not affect performance.
■Ordering Information
(A) - * P - 0.8 SV 1 (21)
FX6
1
2
3
4
5
6
7
8
q Series Name: FX6
y Contact type
w Blank: With boss
u Product Height Variable Blank : Standard, 1: +1mm
A
SV: Board vertical type
2 : +2mm
: Without boss
i Packaging Style
e Number of Contacts : 20,40,50,60,80,100
r Connector Type
Blank
: Stick packaging (No pick & place tape)
P: Header
(21) : Stick packaging (Pick & place tape)
S: Receptacle
(22) : Embossed tape packaging (No pick & place tape)
t Contact Pitch: 0.8mm
(23) : Embossed tape packaging (Pick & place Stick tape)
■Stacking Height Variation
Unit: mm
FX6(A)-*S-0.8SV2
FX6(A)-πP-0.8SV
5
7
FX6(A)-πP-0.8SV1
6
8
FX6(A)-πP-0.8SV2
7
9
5 to 9
FX6(A)-*S-0.8SV
(* indicates 20, 40, 50, 60, 80, and 100 contacts.)
■Packaging Type
Packaging Type
Stick Packaging
Number of Contacts
Packaged Product Pieces
Sales Unit
Tape Width
Embossed Tape Packaging
A214
20 contacts 40 contacts 50 contacts
33 pieces
22 pieces
19 pieces
60contacts
16 pieces
80 contacts 100 contacts
13 pieces
11 pieces
Order by doubling the number of pieces contained in the product. (Example) In case of 20 contacts,33 pieces, 66 pieces,...
24mm
44mm
44mm
44mm
56mm
Product Pitch
12mm
Emboss Reel Diameter
FX6(A)_*S-0.8SV ……………………………………………Ø330mm
FX6(A)_*P_0.8SV.FX6(A)_*S-0.8SV2 …………………Ø360mm
FX6(A)_*P_0.8SV1.FX6(A)_*P-0.8SV2 ………………Ø380mm
Packaged Product Pieces
1000 pieces packaged per reel
Sales Unit
Per reel
With Boss Type
■Header-Stacking Height: Standard type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
FX6-020P-0.8SV
576-0001-3
20
15.8
12.9
10.7
07.2
12.8
FX6-040P-0.8SV
576-0003-9
40
23.8
20.9
18.7
15.2
20.8
FX6-050P-0.8SV
576-0004-1
50
27.8
24.9
22.7
19.2
24.8
FX6-060P-0.8SV
576-0005-4
60
31.8
28.9
26.7
23.2
28.8
FX6-080P-0.8SV
576-0007-0
80
39.8
36.9
34.7
31.2
36.8
FX6-100P-0.8SV
576-0008-2
100
47.8
44.9
42.7
39.2
44.8
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number by an integer.
Please make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A215
With Boss Type
■Header-Stacking Height: Standard type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
FX6-020P-0.8SV1
576-0021-0
20
15.8
12.9
10.7
07.2
12.8
FX6-040P-0.8SV1
576-0023-6
40
23.8
20.9
18.7
15.2
20.8
FX6-050P-0.8SV1
576-0024-9
50
27.8
24.9
22.7
19.2
24.8
FX6-060P-0.8SV1
576-0025-1
60
31.8
28.9
26.7
23.2
28.8
FX6-080P-0.8SV1
576-0027-7
80
39.8
36.9
34.7
31.2
36.8
FX6-100P-0.8SV1
576-0028-0
100
47.8
44.9
42.7
39.2
44.8
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number by an integer.
Make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A216
With Boss Type
■Header-Stacking Height: Standard+2mm type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
FX6-020P-0.8SV2
576-0041-8
20
15.8
12.9
10.7
07.2
12.8
FX6-040P-0.8SV2
576-0043-3
40
23.8
20.9
18.7
15.2
20.8
FX6-050P-0.8SV2
576-0044-6
50
27.8
24.9
22.7
19.2
24.8
FX6-060P-0.8SV2
576-0045-9
60
31.8
28.9
26.7
23.2
28.8
FX6-080P-0.8SV2
576-0047-4
80
39.8
36.9
34.7
31.2
36.8
FX6-100P-0.8SV2
576-0048-7
100
47.8
44.9
42.7
39.2
44.8
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number by an integer.
Make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A217
With Boss Type
■Receptacle-Stacking Height: Standard type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
FX6-020S-0.8SV
576-0101-8
20
15.8
12.95
10.9
07.2
11.2
FX6-040S-0.8SV
576-0103-3
40
23.8
20.95
18.9
15.2
19.2
FX6-050S-0.8SV
576-0104-6
50
27.8
24.95
22.9
19.2
23.2
FX6-060S-0.8SV
576-0105-9
60
31.8
28.95
26.9
23.2
27.2
FX6-080S-0.8SV
576-0107-4
80
39.8
36.95
34.9
31.2
35.2
FX6-100S-0.8SV
576-0108-7
100
47.8
44.95
42.9
39.2
43.2
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number by an integer.
Make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A218
With Boss Type
■Receptacle-Stacking Height: Standard+2mm type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
E
FX6-020S-0.8SV2
576-0121-5
20
15.8
12.95
10.9
07.2
11.2
FX6-040S-0.8SV2
576-0123-0
40
23.8
20.95
18.9
15.2
19.2
FX6-050S-0.8SV2
576-0124-3
50
27.8
24.95
22.9
19.2
23.2
FX6-060S-0.8SV2
576-0125-6
60
31.8
28.95
26.9
23.2
27.2
FX6-080S-0.8SV2
576-0127-1
80
39.8
36.95
34.9
31.2
35.2
FX6-100S-0.8SV2
576-0128-4
100
47.8
44.95
42.9
39.2
43.2
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number by an integer.
Make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A219
Without Boss Type
■Header-Stacking Height: Standard type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FX6A-020P-0.8SV
576-0201-2
20
15.8
12.9
10.7
07.2
FX6A-040P-0.8SV
576-0203-8
40
23.8
20.9
18.7
15.2
FX6A-050P-0.8SV
576-0204-0
50
27.8
24.9
22.7
19.2
FX6A-060P-0.8SV
576-0205-3
60
31.8
28.9
26.7
23.2
FX6A-080P-0.8SV
576-0207-9
80
39.8
36.9
34.7
31.2
FX6A-100P-0.8SV
576-0208-1
100
47.8
44.9
42.7
39.2
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number
by an integer. Please make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A220
Without Boss Type
■Header-Stacking Height: Standard+1 type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FX6A-020P-0.8SV1
576-0221-0
20
15.8
12.9
10.7
07.2
FX6A-040P-0.8SV1
576-0223-5
40
23.8
20.9
18.7
15.2
FX6A-050P-0.8SV1
576-0224-8
50
27.8
24.9
22.7
19.2
FX6A-060P-0.8SV1
576-0225-0
60
31.8
28.9
26.7
23.2
FX6A-080P-0.8SV1
576-0227-6
80
39.8
36.9
34.7
31.2
FX6A-100P-0.8SV1
576-0228-9
100
47.8
44.9
42.7
39.2
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number
by an integer. Please make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A221
Without Boss Type
■Receptacle-Stacking Height: Standard+2mm type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FX6A-020P-0.8SV2
576-0241-7
20
15.8
12.9
10.7
07.2
FX6A-040P-0.8SV2
576-0243-2
40
23.8
20.9
18.7
15.2
FX6A-050P-0.8SV2
576-0244-5
50
27.8
24.9
22.7
19.2
FX6A-060P-0.8SV2
576-0245-8
60
31.8
28.9
26.7
23.2
FX6A-080P-0.8SV2
576-0247-3
80
39.8
36.9
34.7
31.2
FX6A-100P-0.8SV2
576-0248-6
100
47.8
44.9
42.7
39.2
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number
by an integer. Please make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A222
Without Boss Type
■Receptacle-Stacking Height: Standard type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FX6A-020S-0.8SV
576-0301-7
20
15.8
12.95
10.9
07.2
FX6A-040S-0.8SV
576-0303-2
40
23.8
20.95
18.9
15.2
FX6A-050S-0.8SV
576-0304-5
50
27.8
24.95
22.9
19.2
FX6A-060S-0.8SV
576-0305-8
60
31.8
28.95
26.9
23.2
FX6A-080S-0.8SV
576-0307-3
80
39.8
36.95
34.9
31.2
FX6A-100S-0.8SV
576-0308-6
100
47.8
44.95
42.9
39.2
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number
by an integer. Please make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A223
Without Boss Type
■Receptacle-Stacking Height: Standard+2mm type
BPCB mounting pattern
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
FX6A-020S-0.8SV2
576-0321-4
20
15.8
12.95
10.9
07.2
FX6A-040S-0.8SV2
576-0323-0
40
23.8
20.95
18.9
15.2
FX6A-050S-0.8SV2
576-0324-2
50
27.8
24.95
22.9
19.2
FX6A-060S-0.8SV2
576-0325-5
60
31.8
28.95
26.9
23.2
FX6A-080S-0.8SV2
576-0327-0
80
39.8
36.95
34.9
31.2
FX6A-100S-0.8SV2
576-0328-3
100
47.8
44.95
42.9
39.2
Note:Determine a quantity of the stick package product for delivery, multiplying the insertion pieces per contact number
by an integer. Please make sure that a quantity of the stick package product for delivery is determined per reel (1000 pieces).
(Refer to the delivery form item on page A214 for details.)
A224
BPrecautions
1. Tolerance Clearance on Mating Side
The effective contact length of the product is set to 1.7mm. Please use the products as to set the clearance within 1.0mm
between the header and the receptacle in the mating process.
2. Mounting Temperature Profile (Reference)
Applicable Conditions
Reflow system
:IR reflow
Solder
:Paste type 63 Sn/37 Pb
(Flux content 11 wt%)
Test board
:Glass epoxy 110mm x 55mm x 1.6 mm
Metal mask thickness
:0.15 mm
Recommended temperature profile.
The temperature may be slightly changed according to the solder
paste type and amount.
3. Board to Board Size
The board to board size of the male/female connector shown in the application pattern doesn't include the solder paste
thickness. Thus, after the connector is mounted on the board, consider that the board to board size will be widened in
proportion to the solder paste thickness.
A225
Similar pages