Amphenol FXPT12200 Fxp flexiplugâ® hybrid pluggable block screw/pressure-plate termination Datasheet

.200" (5.08mm)
FXP FlexiPlug® HYBRID PLUGGABLE BLOCK
Screw/Pressure-Plate Termination
HYBRID TERMINAL BLOCK
FXP FlexiPlug® hybrid terminal blocks
combine U.S.-style standard screwdriver barrier-block wire terminations
with a European-style pluggable block
nose; and will mate with both
Amphenol Pcd and competitive headers. FlexiPlugs can be used interchangeably with moving cage clamp
style plugs, such as ELF, and both plug
styles can be used in the same system.
Screw/pressure-plate terminations
enclosed in a tri-barrier configuration
accept either a #2 Philips head or a
1/4" flat screwdriver and will accommodate up to two 12 AWG wires or
ring- or fork-tongue terminals
FLEXIPLUG OPTIONS
Optional accessories and variations,
outlined below, greatly expand the
FXP application range and flexibility.
Refer to the Part Number Guide on
this page for catalog number and
ordering guidance, or contact
Amphenol Pcd.
Locking Ears
Integrally molded locking ears are
available with all FlexiPlugs for use in
high-stress or high-vibration applications, or where unintentional disconnect must be prevented. Plug ears
hold a captive floating locking screw
that engages a threaded insert in the
ELFH header ear.
Safety Cover
Open Back Wall
Plugs can be supplied with an open
back wall on the upper row of contacts (see photo insert above). This
facilitates fanning of wires in two
directions during installation.
Plating
Plugs and mating ELFH headers are
available with selective gold plating.
Keying
Standard ELF line keying tabs, as
described on page 29, are applicable on the FXP as well.
Marking
FXP plugs are available with a variety
of standard and special markings.
Please contact the factory to discuss
your requirements.
Open Back
Color
The standard color for FXP series
plugs is black. All FlexiPlugs are also
available—with the same delivery
commitment—in green.
Protective Cover
A clear protective “finger-proof”
safety cover can be provided with the
FlexiPlug. See photo above. Contact
Amphenol Pcd for details.
SPECIAL VARIATIONS
In addition to the standard FlexiPlug
product variations, Amphenol Pcd is a
leading supplier of special block configurations and modifications, tailored
to meet unusual system design
requirements. The FXP screw clamp
termination is suited for special I/O
configurations. Please contact the factory for further discussions.
For plugs with an even number of
contact positions, one locking screw
must be offset from the header by
using the FXPAD adapter (see illustration above).
Amphenol Pcd
42
Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [email protected]
FXP FlexiPlug® HYBRID PLUGGABLE BLOCK
Screw/Pressure-Plate Termination
FXP Even Pos #
Pos
Catalog #
Black
Catalog #
Green
2
FXPT02200
FXPT022G0
4
6
8
FXP Uneven Pos #
FXP Even Pos # w/ Ears
.200" (5.08mm)
FXP Uneven Pos # w/ Ears
L
(In.)
Pos
Catalog #
Black
Even Configuration w/ Ears
Uneven Configuration w/ Ears
.670
3
FXPT03200
FXPT032G0 0.870
2 FXPT02200E FXPT022G0E .840
3 FXPT03200E FXPT032G0E 1.040
FXPT04200
FXPT042G0 1.070
5
FXPT05200
FXPT052G0 1.270
4 FXPT04200E FXPT042G0E 1.240
5 FXPT05200E FXPT052G0E 1.440
FXPT06200
FXPT062G0 1.470
7
FXPT07200
FXPT072G0 1.670
6 FXPT06200E FXPT062G0E 1.640
7 FXPT07200E FXPT072G0E 1.840
Even Configuration
Catalog #
Green
L
(In.)
Uneven Configuration
Pos
Catalog #
Black
Catalog #
Green
L
(In.)
Pos
Catalog #
Black
Catalog #
Green
L
(In.)
FXPT08200
FXPT082G0 1.870
9
FXPT09200
FXPT092G0 2.070
8 FXPT08200E FXPT082G0E 2.040
9 FXPT09200E FXPT092G0E 2.240
10 FXPT10200
FXPT102G0 2.270
11 FXPT11200
FXPT112G0 2.470
10 FXPT10200E FXPT102G0E 2.440
11 FXPT11200E FXPT112G0E 2.640
12 FXPT12200
FXPT122G0 2.670
13 FXPT13200
FXPT132G0 2.870
12 FXPT12200E FXPT122G0E 2.840
13 FXPT13200E FXPT132G0E 3.040
14 FXPT14200
FXPT142G0 3.070
15 FXPT15200
FXPT152G0 3.270
14 FXPT14200E FXPT142G0E 3.240
15 FXPT15200E FXPT152G0E 3.440
16 FXPT16200
FXPT162G0 3.470
17 FXPT17200
FXPT172G0 3.670
16 FXPT16200E FXPT162G0E 3.640
17 FXPT17200E FXPT172G0E 3.840
18 FXPT18200
FXPT182G0 3.870
19 FXPT19200
FXPT192G0 4.070
18 FXPT18200E FXPT182G0E 4.040
19 FXPT19200E FXPT192G0E 4.240
20 FXPT20200
FXPT202G0 4.270
21 FXPT21200
FXPT212G0 4.470
20 FXPT20200E FXPT202G0E 4.440
21 FXPT21200E FXPT212G0E 4.640
22 FXPT22200
FXPT222G0 4.670
23 FXPT23200
FXPT232G0 4.870
22 FXPT22200E FXPT222G0E 4.840
24 FXPT24200
FXPT242G0 5.070
SPECIFICATIONS:
MATERIALS:
INSTALLATION:
APPROVALS:
Current Rating: 15A
Operating Voltage: 300V
Insulation Resistance: >105 Megohms
Dielectric Withstanding: <3000V
Wire Pullout Force:
Per UL 486E, Section 14
Housing: PPO, UL 94V-0, Black or green
Contact: Phosphor bronze, optional finish
SEM Screw: M3, Steel, nickel finish
Wire Range: 12-26 AWG
Wire Strip Length: .250"
Recommended Tightening Torque:
12 lb-in. (1.35N-m)
Screwdriver: #2 Phillips, 1/4" blade
Consult factory for specific product recognitions
Amphenol Pcd
Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [email protected]
43
.200" (5.08mm)
ELFH HEADERS with Locking Ears
ELFH Horizontal—Eared
ELFH SERIES HEADERS
ELFH Series headers mate
with ELF Series, FXP
FlexiPlug and SCF spring
clamp plugs; and accommodate competitive plugs as
well. The headers are precision-molded from tough,
stable PBT, providing additional strength and greater
reliability under extreme
conditions. Screwdriver slots
at either end facilitate
unplugging and eliminate
the possibility of body
damage.
SMT Compatibility
ELF headers are available in
ultra-high-temperature, glassfilled polyamide, capable of
withstanding temperatures of
260°C for three minutes
while undergoing SMT
reflow soldering. This eliminates the need for a separate header wave soldering
operation if SMT is being
employed in the board manufacturing process. See
page 25 for instructions on
how to order. Note:
Available in black only.
Locking and Mounting Ears
Integrally molded locking
ears are available with all
ELFH headers. A threaded
insert in the header ear is
engaged by a plug mounting screw, which is tightened after plug and header
are mated, securing the
connection. Note: locking
ears add a contact position
per side to header length.
An “E” is added to the catalog number to specify locking ears.
Locking ears can also be
used as mounting ears to
secure the header to printed
circuit boards or chassis,
and are available as well
with blank through-holes in
the “vertical” orientation for
custom mounting.
Gold Plating: Indicate “1” as
the last digit of catalog no.
for black parts; “1G” in the
last position for green parts.
Consult PCD for assistance
with locking-ear headers.
Pos
Catalog #
Black
Catalog #
Green
2 ELFH02210E ELFH0221GE
L
(In.) Pos
.80
3 ELFH03210E ELFH0321GE 1.00
Catalog #
Black
Catalog #
Green
2 ELFH02250E ELFH0225GE
L
(In.)
.80
3 ELFH03250E ELFH0325GE 1.00
4 ELFH04210E ELFH0421GE 1.20
4 ELFH04250E ELFH0425GE 1.20
5 ELFH05210E ELFH0521GE 1.40
5 ELFH05250E ELFH0525GE 1.40
6 ELFH06210E ELFH0621GE 1.60
6 ELFH06250E ELFH0625GE 1.60
7 ELFH07210E ELFH0721GE 1.80
7 ELFH07250E ELFH0725GE 1.80
8 ELFH08210E ELFH0821GE 2.00
8 ELFH08250E ELFH0825GE 2.00
9 ELFH09210E ELFH0921GE 2.20
9 ELFH09250E ELFH0925GE 2.20
10 ELFH10210E ELFH1021GE 2.40 10 ELFH10250E ELFH1025GE 2.40
11 ELFH11210E ELFH1121GE 2.60 11 ELFH11250E ELFH1125GE 2.60
12 ELFH12210E ELFH1221GE 2.80 12 ELFH12250E ELFH1225GE 2.80
13 ELFH13210E ELFH1321GE 3.00 13 ELFH13250E ELFH1325GE 3.00
14 ELFH14210E ELFH1421GE 3.20 14 ELFH14250E ELFH1425GE 3.20
15 ELFH15210E ELFH1521GE 3.40 15 ELFH15250E ELFH1525GE 3.40
16 ELFH16210E ELFH1621GE 3.60 16 ELFH16250E ELFH1625GE 3.60
17 ELFH17210E ELFH1721GE 3.80 17 ELFH17250E ELFH1725GE 3.80
18 ELFH18210E ELFH1821GE 4.00 18 ELFH18250E ELFH1825GE 4.00
19 ELFH19210E ELFH1921GE 4.20 19 ELFH19250E ELFH1925GE 4.20
20 ELFH20210E ELFH2021GE 4.40 20 ELFH20250E ELFH2025GE 4.40
21 ELFH21210E ELFH2121GE 4.60 21 ELFH21250E ELFH2125GE 4.60
22 ELFH22210E ELFH2221GE 4.80 22 ELFH22250E ELFH2225GE 4.80
Marking: See page 25
Accessories: Polarizing keys
and marking labels. See
page 29.
APPROVALS:
Contact factory for specific product recognition
See page 25 for temperature, gold plating and marking options
SPECIFICATIONS:
MATERIALS:
Current Rating: 15A
Operating Voltage: 300V
Insulation Resistance: >105 Megohms
Dielectric Withstanding: <3000V
Housing: PBT, UL 94V-0 (Standard)
PA 4/6, UL 94V-0 (High temp)
Black or green optional
Contact: Copper alloy, optional finish
Ear Insert, M2.5: Steel, nickel finish
HEADER INSTALLATION:
Amphenol Pcd
44
ELFH Vertical—Eared
Hole Diameter: .055" min.
Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [email protected]
.200" (5.08mm)
ELFH HEADERS
ELFH Horizontal—Closed
Pos
Catalog #
Black
Catalog #
Green
2
ELFH02210
ELFH0221G
3
ELFH03210
ELFH0321G
4
ELFH04210
5
ELFH05210
6
ELFH06210
7
ELFH07210
8
9
ELFH Vertical—Closed
L
(In.)
ELFH Horizontal—Open
L
(In.)
ELFH Vertical—Open
Pos
Catalog #
Black
Catalog #
Green
.40
2
ELFH02250
ELFH0225G
.60
3
ELFH03250
ELFH0325G
ELFH0421G
.80
4
ELFH04250
ELFH0425G
.80
4
ELFH04220
ELFH0422G
.80
4
ELFH04260
ELFH0426G
.80
ELFH0521G
1.00
5
ELFH05250
ELFH0525G
1.00
5
ELFH05220
ELFH0522G
1.00
5
ELFH05260
ELFH0526G
1.00
ELFH0621G
1.20
6
ELFH06250
ELFH0625G
1.20
6
ELFH06220
ELFH0622G
1.20
6
ELFH06260
ELFH0626G
1.20
ELFH0721G
1.40
7
ELFH07250
ELFH0725G
1.40
7
ELFH07220
ELFH0722G
1.40
7
ELFH07260
ELFH0726G
1.40
ELFH08210
ELFH0821G
1.60
8
ELFH08250
ELFH0825G
1.60
8
ELFH08220
ELFH0822G
1.60
8
ELFH08260
ELFH0826G
1.60
ELFH09210
ELFH0921G
1.80
9
ELFH09250
ELFH0925G
1.80
9
ELFH09220
ELFH0922G
1.80
9
ELFH09260
ELFH0926G
1.80
10 ELFH10210
ELFH1021G
2.00
10 ELFH10250
ELFH1025G
2.00
10 ELFH10220
ELFH1022G
2.00
10 ELFH10260
ELFH1026G
2.00
11 ELFH11210
ELFH1121G
2.20
11 ELFH11250
ELFH1125G
2.20
11 ELFH11220
ELFH1122G
2.20
11 ELFH11260
ELFH1126G
2.20
12 ELFH12210
ELFH1221G
2.40
12 ELFH12250
ELFH1225G
2.40
12 ELFH12220
ELFH1222G
2.40
12 ELFH12260
ELFH1226G
2.40
13 ELFH13210
ELFH1321G
2.60
13 ELFH13250
ELFH1325G
2.60
13 ELFH13220
ELFH1322G
2.60
13 ELFH13260
ELFH1326G
2.60
14 ELFH14210
ELFH1421G
2.80
14 ELFH14250
ELFH1425G
2.80
14 ELFH14220
ELFH1422G
2.80
14 ELFH14260
ELFH1426G
2.80
15 ELFH15210
ELFH1521G
3.00
15 ELFH15250
ELFH1525G
3.00
15 ELFH15220
ELFH1522G
3.00
15 ELFH15260
ELFH1526G
3.00
16 ELFH16210
ELFH1621G
3.20
16 ELFH16250
ELFH1625G
3.20
16 ELFH16220
ELFH1622G
3.20
16 ELFH16260
ELFH1626G
3.20
17 ELFH17210
ELFH1721G
3.40
17 ELFH17250
ELFH1725G
3.40
17 ELFH17220
ELFH1722G
3.40
17 ELFH17260
ELFH1726G
3.40
18 ELFH18210
ELFH1821G
3.60
18 ELFH18250
ELFH1825G
3.60
18 ELFH18220
ELFH1822G
3.60
18 ELFH18260
ELFH1826G
3.60
19 ELFH19210
ELFH1921G
3.80
19 ELFH19250
ELFH1925G
3.80
19 ELFH19220
ELFH1922G
3.80
19 ELFH19260
ELFH1926G
3.80
Pos
Catalog #
Black
Catalog #
Green
.40
2
ELFH02220
ELFH0222G
.60
3
ELFH03220
ELFH0322G
L
(In.)
Pos
Catalog #
Black
Catalog #
Green
L
(In.)
.40
2
ELFH02260
ELFH0226G
.40
.60
3
ELFH03260
ELFH0326G
.60
20 ELFH20210
ELFH2021G
4.00
20 ELFH20250
ELFH2025G
4.00
20 ELFH20220
ELFH2022G
4.00
20 ELFH20260
ELFH2026G
4.00
21 ELFH21210
ELFH2121G
4.20
21 ELFH21250
ELFH2125G
4.20
21 ELFH21220
ELFH2122G
4.20
21 ELFH21260
ELFH2126G
4.20
22 ELFH22210
ELFH2221G
4.40
22 ELFH22250
ELFH2225G
4.40
22 ELFH22220
ELFH2222G
4.40
22 ELFH22260
ELFH2226G
4.40
23 ELFH23210
ELFH2321G
4.60
23 ELFH23250
ELFH2325G
4.60
23 ELFH23220
ELFH2322G
4.60
23 ELFH23260
ELFH2326G
4.60
24 ELFH24210
ELFH2421G
4.80
24 ELFH24250
ELFH2425G
4.80
24 ELFH24220
ELFH2422G
4.80
24 ELFH24260
ELFH2426G
4.80
See page 25 for temperature, gold plating and marking options
MATERIALS:
SPECIFICATIONS:
Housing: PBT, UL 94V-0 (Standard)
PA 4/6, UL 94V-0 (High temp)
Black (Green option standard only)
Contact: Copper alloy, optional finish
Current Rating: 15A
Operating Voltage: 300V
Insulation Resistance: >105 Megohms
Dielectric Withstanding: <3000V
APPROVALS:
Contact factory for specific product recognition
HEADER INSTALLATION:
Hole Diameter: .055" min.
Amphenol Pcd
Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [email protected]
45
Similar pages