NKK G12AH Process sealed ultra-miniature toggle Datasheet

Process Sealed Ultra-Miniature Toggles
Series G
Distinctive Characteristics
Ultra-miniature size allows high density mounting, and extremely light weight
of 0.25 gram makes these switches ideal for handheld equipment.
Totally sealed body construction prevents contact contamination
and allows time- and money-saving automated soldering and
cleaning.
Molded-in, epoxy sealed terminals lock out flux,
solvents, and other contaminants.
Award-winning STC contact mechanism with
benefits unavailable in conventional mechanisms:
smooth, positive detent actuation, increased
contact stability, and unparalleled logic-level
reliability. (Additional STC details in Terms &
Acronyms; see Supplement section.)
.100” x .100” (2.54mm x 2.54mm) terminal
spacing conforms to standard PC board grid
spacing. Round terminals facilitate easier
through-hole mounting on PC boards.
Matching indicators available and shown at the
end of Section M.
G Series illuminated toggles also appear in the Illuminated
Other Section M.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
02-08
Process Sealed Ultra-Miniature Toggles
Series G
General Specifications
Electrical Capacity (Resistive Load)
Logic Level:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Angle of Throw:
Materials & Finishes
Actuator:
Case:
Sealing Rings:
Movable Contacts:
Stationary Contacts:
Base:
Terminals:
Support Bracket:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
PCB Processing
Soldering:
Cleaning:
Standards & Certifications
UL Recognition
or CSA Certification:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
80 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
100,000 operations minimum for On-None-On & On-Off-On
50,000 operations minimum for other circuits
100,000 operations minimum for On-None-On & On-Off-On
50,000 operations minimum for other circuits
0.93N for momentary & 1.20N for maintained
28°
Glass fiber reinforced polyamide
Glass fiber reinforced polyamide
Nitrile butadiene rubber
Phosphor bronze with gold plating
Phosphor bronze with gold plating
Glass fiber reinforced polyamide
Phosphor bronze with gold plating
Phosphor bronze with tin plating
–25°C through +85°C (–13°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Wave Soldering Rcommended: See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Automated cleaning. See Cleaning specifications in Supplement section.
The G Series toggles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
02-08
Series G
Process Sealed Ultra-Miniature Toggles
TYPICAL SWITCH ORDERING EXAMPLE
1
G
3
POLES
A
CIRCUITS
H
PC TERMINALS
ACTUATOR
1
SPDT
2
ON
NONE
ON
2
DPDT
3
ON
OFF
ON
5
ON
NONE
(ON)
8
(ON)
OFF
(ON)
9
ON
OFF
(ON)
.150” (3.8mm)
Column Toggle
A
P
Straight
H
Right Angle
V
Vertical
( ) = Momentary
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
G13AH
SPDT
ON-OFF-ON Circuit
.150” (3.8mm)
Column Toggle
Right Angle
PC Terminals
POLES & CIRCUITS
Toggle Position
( ) = Momentary
Up
Center
Connected Terminals
Down
Throw & Schematics
Up
Center
Down
Note:
Pole
Model
SP
G12
G13
G15
G18
G19
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
5-6
OPEN
5-4
SPDT
DP
G22
G23
G25
G28
G29
ON
ON
ON
(ON)
ON
NONE
OFF
NONE
OFF
OFF
ON
ON
(ON)
(ON)
(ON)
5-6 2-3
OPEN
5-4 2-1
DPDT
Slot
Slot
Terminal numbers are
not actually on the switch.
5 (COM)
6
4
5
4
(COM)
6
2
1
3
ACTUATOR
A
28ϒ
.150” (3.8mm) Column Toggle
(3.8)
.150
(1.7) Dia
.067
(4.0) Dia
.157
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
02-08
Process Sealed Ultra-Miniature Toggles
Series G
PC TERMINALS
P
H
Straight
(2.54) Typ
.100
(0.4) Dia Typ
.016
(7.0)
.276
V
Right Angle
Vertical
(0.5) Typ
.020
(0.4) Dia Typ
.016
(2.54) Typ
.100
(2.54) Typ
.100
(2.6)
.102
(2.54) Typ
.100
(0.5) Typ
.020
(4.5)
.177
(2.54) Typ
.100
(7.0)
.276
(4.5)
.177
(2.54) Typ
.100
(0.4) Dia Typ
.016
(4.5)
.177
(7.0)
.276
TYPICAL SWITCH DIMENSIONS
Straight PC
Single & Double Pole
(2.54)
.100 4
(1.7) Dia
.067
(4.0) Dia
.157
6
1
28ϒ
Slot
(4.5)
.177
(3.8)
.150
(1.6)
.063
(7.0)
.276
(2.54) Typ
.100
5
(0.4) Dia Typ
.016
2
4
5
3
6
(2.54) Typ
.100
(2.6)
.102
(7.0)
.276
(2.54)
.100
(0.6) Dia Typ
.024
(2.54)
.100
4
1
5
2
6
3
(2.54) Typ
.100
(0.6) Dia Typ
.024
On single pole models, locations 1 & 3 are for support pins.
G19AP
Right Angle PC
Single & Double Pole
28ϒ
Slot
(2.54) Typ
.100
4
(1.7) Dia
.067
(4.0) Dia
.157
3
2
(0.4)
.016
1
5
6
(0.6) Dia Typ
.024
(5.08)
.200
(4.9)
.193
(2.6)
.102
(0.4) Dia Typ
.016
(5.08)
.200
(7.8)
.307
(3.8)
.150
(5.08)
.200
(1.6)
.063
(10.22)
.402
6
5
4
(0.5)
.020
(2.54)
.100
(0.4) Dia Typ
.016
(2.54) Typ
.100
(2.54) Typ
.100
1
2
3
4
5
6
(0.6) Dia Typ
.024
(2.54)
.100
(5.08)
.200
(7.0)
.276
G19AH
Vertical PC
Single & Double Pole
(2.54)
.100 4
(1.7) Dia
.067
(0.4)
.016
(4.0) Dia
.157
(2.54) Typ
.100
5
6
1
28ϒ
2
4
5
3
6
(7.4)
.292
(0.6) Dia Typ
.024
(5.08)
.200
(2.6)
.102
Slot
(0.4) Dia Typ
.016
(2.54)
.100
(5.3)
.209
(1.6)
.063
(3.8)
.150
(1.0)
.039
(5.08)
.200
(12.76)
.502
(0.5) Typ
.020
(2.54) Typ
.100
CL
(0.4) Dia Typ
.016
(2.54)
.100
(4.5)
.177
(2.54)
.100
4
1
5
2
6
3
(0.6) Dia Typ
.024
(2.54) Typ
.100
(5.08)
.200
G22AV
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
02-08
Similar pages