MMD G20BA1 5mm x 7mm x 4 pads ceramic package Datasheet

G Series Crystal
¾
5mm X 7mm X 4 Pads Ceramic Package
¾
Wide Frequency Range
¾
Tight Tolerance and Stability
¾
Tape and Reel Packaging
ESR CHART:
ELECTRICAL SPECIFICATIONS:
Frequency Range
Frequency Tolerance / Stability
Operating Temperature Range
Storage Temperature
Aging
Shunt Capacitance
Load Capacitance
Equivalent Series Resistance
Mode of Operation
Drive Level
Insulation Resistance
Shock
Solderability
Solvent Resistance
Vibration
Gross Leak Test
Fine Leak Test
Frequency Range
6.000MHZ to 6.999MHZ
7.000MHZ to 7.999MHZ
8.000MHZ to 8.999MHZ
9.000MHZ to 9.999MHZ
10.000MHZ to 10.999MHZ
11.000MHZ to 11.999MHZ
12.000MHZ to 15.999MHZ
16.000MHZ to 39.999MHZ
40.000MHZ to 83.999MHZ
84.000MHZ to 100.000MHZ
6.000MHZ to 100.000MHZ
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-40°C to +85°C
±5ppm / first year Max
7pF Max
20pF Standard
(See Part Number Guide for Options)
See ESR Chart
Fundamental, or 3rd OT
1µW Typical
500 Megaohms Min at 100VDC
MIL-STD-883, Meth 2002, Cond B
MIL-STD-883, Meth 2003
MIL-STD-202, Meth 215
MIL-STD-883, Meth 2007, Cond A
MIL-STD-883, Meth 1014, Cond C
MIL-STD-883, Meth 1014, Cond A
ESR (Ohms)
120 Max
110 Max
100 Max
90 Max
80 Max
70 Max
60 Max
40 Max
70 Max
60 Max
Mode / Cut
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
Fund / AT
3rd OT / AT
3rd OT / AT
MARKING:
Line 1: MXX.XXX
XX.XXX = Frequency in MHz
Line 2: SYMCCL
S = Internal Code
YM = Date Code (Year/Month)
CC = Crystal Parameters Code
L = Denotes RoHS Compliant
MECHANICALS DETAIL:
7.20 [.283]
MAX
1.30 [.051]
MAX
4.10 [.161]
4.60 [.181]
1.10 [.043]
Marking
3
5.20 [.205]
MAX
4
2.54 [.100]
2
Pin Connections
Pin 1
1
Pin 3
1.00 [.039]
Crystal
Pin 2 Case Ground
1.40 [.055]
Dimension in Brackets are in Inches
Crystal
Pin 4 Case Ground
2.20 [.087]
Recommended
Land Pattern
PART NUMBER GUIDE:
Frequency
G
5mm X 7mm x 1.3mm
4 Pads
Load Capacitance
S = Series
20 = 20pF (Standard)
XX = XXpF (8pF to 50pF)
Temperature
Tolerance/Stability*
A = ±50 ppm / ±100 ppm
B = ±30 ppm / ±50 ppm
C = ±15 ppm / ±30 ppm
D = ±10 ppm / ±15 ppm
E = ±50 ppm / ±50 ppm
N = ±10 ppm / ±10 ppm
Mode of Operation
1 = Fundamental
3 = 3rd Overtone
Operating Temperature
A = 0°C to +70°C
B = -20°C to +70°C
C = -40°C to +85°C **
Value Added Options
Blank = No Added Options
T = Tape and Reel
* Please consult with MMD sales department for any other parameters or options.
** Not all Frequency Tolerance/Stability options available at this temperature range.
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Specifications subject to change without notice
Revision 01/30/07 F
Similar pages