Gulf G8XB60 Single phase glass passivated bridge rectifier voltage: 50 to 1000v current: 8.0a Datasheet

G8XB05 THRU G8XB100
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50
to 1000V
Current: 8.0A
Features
GSIB-3S
Glass passivated chip junction
Ideal for printed circuit board
High surge current capability
High case dielectric strength
Mechanical Data
Terminal: Plated leads solderable per MIL-STD 202E,
Method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity: Polarity symbol marked on body
Mounting position: any
Dimensions in millimeters
MAXIMUM
RATINGS AND ELECTRICAL
CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
Symbol
G8XB
05
G8XB
10
G8XB
20
G8XB
40
G8XB
60
G8XB
80
G8XB
100
units
1000
V
Maximum repetitive peak reverse voltage
Vrrm
50
100
200
400
600
800
Maximum RMS voltage
Vrms
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
Vdc
50
100
200
400
600
800
1000
V
Maximum average forward Rectified output current
at Tc = 100℃(Note 1)
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage drop per
leg at 4.0A
If(av)
8.0
A
Ifsm
150
A
Vf
1.0
V
I2t
120
A2Sec
Ir
10.0
200
µA
(Note2)
(Note1)
Rth(ja)
Rth(jc)
22.0
4.2
℃/W
Operating junction and storage temperature range
Tj, Tstg
-55 to +150
℃
Rating for fusing (t < 8.3ms)
Maximum DC reverse current at
rated DC blocking voltage per leg
Maximum thermal resistance per leg
Ta = 25°C
Ta = 125°C
Note:
1. Unit case mounted onAl plate heatsink
2. Unit case mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper peads and 0.375”(9.5mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Rev.A1
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES G8XB05 THRU G8XB100
Rev.A1
www.gulfsemi.com
Similar pages