GMT G915T64U 1.5v 600ma low dropout regulator Datasheet

G915
Global Mixed-mode Technology Inc.
1.5V 600mA Low Dropout Regulator
Features
General Description
„
The G915 positive 1.5V voltage regulator features the
ability to source 600mA of output current. A low quiescent current is provided. The typical quiescent current is 0.3mA.
„
„
„
„
„
Wide Input Voltage Range 2.9V~6V
Output Current in Excess of 600mA
Output Voltage Accuracy ±2%
Quiescent Current, Typically 0.3mA
Internal Short Circuit Current Limit
Internal Over Temperature Protection
Familiar regulator features such as over temperature
and current limit protection circuits are provided to prevent it from being damaged by abnormal operating
conditions.
Ordering Information
ORDER
NUMBER
ORDER NUMBER
MARKING
(Pb free)
TEMP.
RANGE
PACKAGE
1
PIN OPTION
2
3
G915T24U
G915T24Uf
915x
-40°C ~85°C
SOT-89
GND
VIN
VOUT
G915T64U
G915T64Uf
915T64
-40°C ~85°C
SOT-223
GND
VIN
VOUT
* For other package types, pin options and package, please contact us at [email protected]
Order Number Identification
GXXX
XX
X
X
Packing Type
Pin Option
Package Type
Part Number
PACKAGE TYPE
PIN OPTION
T2 : SOT-89
T6 : SOT-223
1
1 : VOUT
2 : VOUT
3 : GND
4 : GND
5 : VIN
6 : VIN
Package Type
2
GND
VIN
VOUT
VIN
GND
VOUT
PACKING
U : Tape & Reel
3
VIN
GND
VIN
VOUT
VOUT
GND
Typical Application
[Note 4]: Type of COUT
IO
VIN
G915
VOUT
Top
TopView
View
C1
1µF
1
2
IQ
COUT
10µF
3
SOT-89/SOT-223
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.3
Jul 30, 2007
1
G915
Global Mixed-mode Technology Inc.
Absolute Maximum Ratings (Note 1)
Operating Conditions
(Note 1)
Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . .2.9V ~ 6V
Temperature Range . . . . . . . . . . . . .-40°C ≤ TA ≤85°C
Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V
Power Dissipation Internally Limited (Note2)
Maximum Junction Temperature . . . . . . . . . . . .150°C
Storage Temperature Range . . . . -65°C ≤ TJ ≤+150°C
Reflow Temperature (soldering, 10sec) . . . . . .260°C
Thermal Resistance Junction to Ambient, (θJA)
SOT-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173°C/W
SOT-223 . . . . . . . . . . . . . . . . . . . . . . . . . . . .148°C/W
Thermal Resistance Junction to Case (θJC)
SOT-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25°C/W
SOT-223 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22°C/W
Note (1): See Recommended Minimum Footprint.
Electrical Characteristics
VIN =2.5V, IO =500mA, CIN=10µF, COUT =10µF. All specifications apply for TA =TJ =25°C. [Note 3]
PARAMETER
MIN
TYP
MAX
UNIT
5mA < IO < 600mA
4V < VIN < 6V, IO = 10mA
10mA < IO < 600mA
2.9
-------
--1.5
10
10
6
-------
V
V
mV
mV
Quiescent Current
VIN = 5V
---
0.3
---
mA
Ripple Rejection
Short Circuit Current
fi = 120 Hz, 1VP-P, IO = 100mA
-----
50
0.65
-----
dB
A
Input Voltage
Output Voltage
Line Regulation
Load Regulation
CONDITION
Current Limit
---
0.8
---
A
Over Temperature
Over Temperature Hysterics
-----
145
25
-----
°C
°C
Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specifications might not be guaranteed. For guaranteed specifications and
test conditions see the Electrical Characteristics.
Note2: The maximum power dissipation is a function of the maximum junction temperature, TJmax ; total thermal resistance, θJA,
and ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is Tjmax-TA / θJA. If this
dissipation is exceeded, the die temperature will rise above 150°C and IC will go into thermal shutdown. For the G915 in
the SOT-89 package is 173°C/W, SOT-223 package is 148°C/W (See Recommended Minimum Footprint). The safe
operation in SOT-89 package, it can see “Typical Performance Characteristics” (Safe Operating Area).
Note3: Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
Note4: The type of output capacitor should be tantalum, aluminum or ceramic.
Definitions
Dropout Voltage
The input/output Voltage differential at which the regulator output no longer maintains regulation against
further reductions in input voltage. Measured when the
output drops 100mV below its nominal value, dropout
voltage is affected by junction temperature, load current and minimum input supply requirements.
Load Regulation
The change in output voltage for a change in load
current at constant chip temperature. The measurement is made under conditions of low dissipation or by
using pulse techniques such that average chip temperature is not significantly affected.
Maximum Power Dissipation
The maximum total device dissipation for which the
regulator will operate within specifications.
Line Regulation
The change in output voltage for a change in input voltage. The measurement is made under conditions of low
dissipation or by using pulse techniques such that average chip temperature is not significantly affected.
Quiescent Bias Current
Current which is used to operate the regulator chip
and is not delivered to the load.
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.3
Jul 30, 2007
2
G915
Global Mixed-mode Technology Inc.
Typical Performance Characteristics
VIN =5V, CIN=1µF, COUT =10µF, TA =25°C. unless otherwise noted.
Line Transient
Load Transient
Start-UP
Short Circuit Current
Overcurrent Protection Characteristics
Ripple Rejection
80
Ripple Rejection (dB)
70
IL=10mA
60
50
40
IL=100mA
30
IL=600mA
20
10
VIN=4V ; COUT=10µF
0
10
100
1000
10000 100000 1000000
Frequency (Hz)
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.3
Jul 30, 2007
3
G915
Global Mixed-mode Technology Inc.
Typical Performance Characteristics (continued)
SOT-89 Max. Power Dissipation
vs. PCB Top Copper Area
TAMB = 25°C ; Still Air
SOT-89 Max. Power Dissipation
vs. TAMB (still air)
( Different PCB Top Copper Area )
Unit : in2
2.5
2.5
A=0.1
Max. Dissipation Power (W)
Max. Dissipation Power (W)
A=0.2
2
2
1.5
1
0.5
A=0.3
A=0.4
A=0.5
1.5
A=1.0
A=1.5
A=2.0
1
A=2.5
A=3.0
A=3.5
0.5
A=4.0
A=4.5
A=5.0
0
0
0
1
2
3
4
PCB Top Copper Area (in2)
5
25
6
40
55
70
TAMB (°C)
Quiescent Current vs. Temperature
Dropout Voltage vs. IL
1500
400
TA=85°C
1400
300
Dropout Voltage (mV)
Quiescent Current (µA)
85
VIN=5V
200
100
VIN=4V
1300
1200
1100
1000
TA=25°C
900
TA=-25°C
800
700
600
100
0
-25 -15 -5
5
15 25 35 45 55 65 75 85
Temperature (°C)
200
500
600
Output Voltage vs. VIN
Output Voltage vs. Temperature
1.53
1.514
IL=10mA
1.512
VIN=5V
Output Voltage (V)
1.52
Output Voltage (V)
300
400
IL (mA)
1.51
1.5
VIN=4V
VIN=3V
1.49
1.48
TA=85°C
IL=10mA
1.51
1.508
1.506
TA=25°C
1.504
1.502
TA=-25°C
1.5
1.47
-25
-5
15
35
Temperature (°C)
55
2.5
75
3
3.5
4
4.5
VIN (V)
5
5.5
6
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.3
Jul 30, 2007
4
Global Mixed-mode Technology Inc.
G915
Recommend Minimum Footprint
SOT-89
SOT-223
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.3
Jul 30, 2007
5
G915
Global Mixed-mode Technology Inc.
Package Information
A
D
POLISH
D1
E
V
HE
A1
b
b1
C
e
SOT-89 (T2) Package
SYMBOL
DIMENSIONS IN MILLIMETER
MIN
NOM
MAX
MIN
DIMENSIONS IN INCHE
NOM
MAX
A
1.40
1.50
1.60
0.055
0.059
0.063
A1
b
0.80
0.36
1.04
0.42
----0.48
0.031
0.014
0.041
0.016
----0.018
b1
C
D
0.41
038
4.40
0.47
0.40
4.50
0.53
0.43
4.60
0.016
0.014
0.173
0.018
0.015
0.177
0.020
0.017
0.181
D1
HE
1.40
-----
1.60
-----
1.75
4.25
0.055
-----
0.062
-----
0.069
0.167
E
e
2.40
2.90
2.50
3.00
2.60
3.10
0.094
0.114
0.098
0.118
0.102
0.122
V
-----
2.60
-----
-----
0.102
-----
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.3
Jul 30, 2007
6
G915
Global Mixed-mode Technology Inc.
A
D
α
B1
C
L1
13°(4X)
H
E
L
L2
e
e1
13°(4X)
A1
B
SOT-223 (T6) Package
SYMBOLS
MILLIMETERS
INCHES
MIN
MAX
MIN
MAX
A
A1
1.55
0.02
1.80
0.12
0.061
0.0008
0.071
0.0047
B
B1
C
D
0.60
2.90
0.24
6.30
0.80
3.10
0.32
6.70
0.024
0.114
0.009
0.248
0.031
0.122
0.013
0.264
E
e
3.30
3.70
0.130
e1
H
L
L1
L2
α
0.090 BSC
4.60 BSC
0.181 BSC
6.70
7.30
0.264
0.90 MIN
1.00 MIN
0.06 BSC
0°
0.146
2.30 BSC
0.287
0.036 MIN
0.039 MIN
0.0024 BSC
10°
0°
10°
Taping Specification
PACKAGE
Q’TY/REEL
SOT-89
1,000 ea
SOT-223
2,500 ea
Feed Direction
SOT-89、223 Package Orientation
GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications.
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 1.3
Jul 30, 2007
7
Similar pages