Vishay GBPC1506W-E4/51 Glass passivated single-phase bridge rectifier Datasheet

GBPC12, GBPC15, GBPC25 & GBPC35
Vishay General Semiconductor
Glass Passivated Single-Phase Bridge Rectifier
FEATURES
GBPC-W
GBPC
• UL recognition file number E54214
• Universal 3-way terminals: snap-on, wire
wrap-around, or P.C.B. mounting
e4
• Typical IR less than 0.3 µA
• High surge current capability
• Low thermal resistance
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
~
~
~
~
~
TYPICAL APPLICATIONS
General purpose use in ac-to-dc bridge full wave
rectification for power supply, home appliances, office
equipment, industrial automation applications.
~
MECHANICAL DATA
Case: GBPC, GBPC-W
Epoxy meets UL 94V-0 flammability rating
Terminals: Nickel plated on faston lugs or silver
plated on wire leads, solderable per J-STD-002
and JESD22-B102. E4 suffix for consumer grade.
Suffix letter “W” added to indicate wire leads
(e.g. GBPC12005W).
Polarity: As marked, positive lead by belevled corner
Mounting Torque: 20 inches-lbs. max.
PRIMARY CHARACTERISTICS
IF(AV)
12 A, 15 A, 25 A, 35 A
VRRM
50 V to 1000 V
IFSM
200 A, 300 A, 300 A, 400 A
IR
5 µA
VF
1.1 V
TJ max.
150 °C
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
GBPC12, 15, 25, 35
005
01
02
04
06
08
10
UNIT
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
V
VDC
50
100
200
400
600
800
1000
V
Maximum DC blocking voltage
Maximum average forward rectified
output current (Fig. 1)
GBPC12
GBPC15
GBPC25
GBPC35
IF(AV)
12
15
25
35
A
Peak forward surge current single
sine-wave superimposed on rated load
GBPC12
GBPC15
GBPC25
GBPC35
IFSM
200
300
300
400
A
Rating (non-repetitive, for t greater than
1 ms and less than 8.3 ms) for fusing
GBPC12
GBPC15
GBPC25
GBPC35
I2 t
160
375
375
660
A 2s
VISO
2500
V
TJ, TSTG
- 55 to + 150
°C
RMS isolation voltage from case to leads
Operating junction storage temperature range
Document Number: 88612
Revision: 15-Apr-08
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
GBPC12, GBPC15, GBPC25 & GBPC35
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
TEST
SYMBOL
CONDITIONS
PARAMETER
GBPC12, 15, 25, 35
005
01
02
04
06
08
10
UNIT
IF = 6.0 A
IF = 7.5 A
IF = 12.5 A
IF = 17.5 A
VF
1.1
V
Maximum reverse DC current at rated
DC blocking voltage per diode
TA = 25 °C
TA = 125 °C
IR
5.0
500
µA
Typical junction capacitance per diode
4 V, 1 MHz
CJ
300
pF
Maximum instantaneous
forward drop per diode
GBPC12
GBPC15
GBPC25
GBPC35
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
GBPC12-25
GBPC35
Typical thermal resistance (1)
GBPC12, 15, 25, 35
005
01
02
04
06
08
10
1.9
1.4
RθJC
UNIT
°C/W
Notes:
(1) With heatsink
(2) Bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #10 screw
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
GBPC1206-E4/51
15.79
51
100
Paper box
GBPC1506-E4/51
15.79
51
100
Paper box
GBPC2506-E4/51
15.79
51
100
Paper box
GBPC3506-E4/51
15.79
51
100
Paper box
GBPC1206W-E4/51
13.8
51
100
Paper box
GBPC1506W-E4/51
13.8
51
100
Paper box
GBPC2506W-E4/51
13.8
51
100
Paper box
GBPC3506W-E4/51
13.8
51
100
Paper box
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88612
Revision: 15-Apr-08
GBPC12, GBPC15, GBPC25 & GBPC35
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
1000
Bridges Mounted on
9.5 x 3.5 x 4.6"
(22.9 x 8.9 x 11.7 cm)
AL, Finned Plate
35
30
Peak Forward Surge Current (A)
Average Forward Current (A)
40
5 x 6 x 4.9"
AL, Finned Plate
25
20
5 x 4 x 3"
AL, Finned Plate
15
6 x 2.2 x 2.2"
AL, Finned Plate
10
60 Hz
Resistive or
Inductive Load
5
100
GBPC12
GBPC15
GBPC25
10
25
0
50
75
100
125
150
175
200
10
1
100
Case Temperature (°C)
Number of Cycles at 60 Hz
Figure 1. Maximum Output Rectified Current
Figure 4. Maximum Non-Repetitive Peak Forward Surge
Current Per Diode
100
GBPC35
RthSA = 0.5 °C/W
35
30
60 Hz
Resistive or
Inductive Load
Instantaneous Forward Current (A)
40
Average Forward Current (A)
GBPC35
1.0 Cycle
0
GBPC25
RthSA = 0.5 °C/W
25
20
GBPC15
RthSA = 1.0 °C/W
15
10
GBPC12
RthSA = 1.0 °C/W
5
10
0
20
30
40
50
60
70
80
90
TA = 150 °C
TA = 125 °C
10
TA = 100 °C
TA = 25 °C
1
0.1
0.4
0
100
0.5
0.6
0.8
0.7
0.9
1.0
1.1
Ambient Temperature (°C)
Instantaneous Forward Voltage (V)
Figure 2. Maximum Output Rectified Current
Figure 5. Typical Instantaneous Forward Characteristics Per Diode
1000
80
70
Instantaneous Reverse Leakage
Current (µA)
Average Power Dissipation of Bridge (W)
TJ = TJ Max.
0.5 ms Single Sine-Wave
Capacitive Load
60
TJ = TJ Max.
50
40
Resistive or
Inductive Load
30
20
10
TA = 150 °C
TA = 125 °C
100
TA = 100 °C
10
1
TA = 25 °C
0.1
0
0
10
20
30
40
0
10
20
30
40
50
60
70
80
90
100
Average Output Current (A)
Percent of Rated Peak Reverse Voltage (%)
Figure 3. Maximum Power Dissipation
Figure 6. Typical Reverse Leakage Characteristics Per Diode
Document Number: 88612
Revision: 15-Apr-08
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
GBPC12, GBPC15, GBPC25 & GBPC35
Vishay General Semiconductor
1000
Transient Thermal Impedance (°C/W)
Junction Capacitance (pF)
1000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
10
100
10
1
0.01
10
1
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
1
0.1
10
100
Reverse Voltage (V)
t - Heating Time (s)
Figure 7. Typical Junction Capacitance Per Diode
Figure 8. Typical Transient Thermal Impedance Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
GBPC-W
Hole for
#10 Screw
0.220 (5.59)
DIA.
0.200 (5.08)
1.135 (28.8)
1.115 (28.3)
0.732 (18.6)
0.692 (17.6)
1.135 (28.8)
1.115 (28.3)
0.042 (1.07)
0.038 (0.97)
DIA.
www.vishay.com
4
0.24 (6.0)
0.18 (4.6)
0.732 (18.6)
0.692 (17.6)
0.24 (6.0)
0.18 (4.6)
0.310 (7.62)
0.290 (7.36)
GBPC
0.470 (11.9)
0.430 (10.9)
0.50 (12.7)
0.44 (11.7)
Hole for
#10 Screw
0.220 (5.59)
DIA.
0.200 (5.08)
0.672 (17.1)
0.632 (16.1)
AC
0.672 (17.1)
0.632 (16.1)
1.135 (28.8)
1.115 (28.3)
0.582 (14.8)
0.542 (13.8)
0.034 (0.86)
0.030 (0.76)
0.732 (18.6)
0.692 (17.6)
0.094 (2.4)
DIA.
1.25
(31.8)
MIN.
1.135 (28.8)
1.115 (28.3)
0.034 (0.86)
0.030 (0.76)
0.25
(6.35)
0.310 (7.62)
0.290 (7.36)
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
0.840 (21.3)
0.740 (18.8)
Document Number: 88612
Revision: 15-Apr-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages