STMicroelectronics GF10NC60KD N-channel 600v - 10a - d2pak / to-220 / to-220fp short circuit rated powermesh igbt Datasheet

STGB10NC60KD
STGF10NC60KD - STGP10NC60KD
N-channel 600V - 10A - D2PAK / TO-220 / TO-220FP
Short circuit rated PowerMESH™ IGBT
General features
Type
VCES
VCE(sat)Max
@25°C
IC
@100°C
STGB10NC60KD
STGP10NC60KD
STGF10NC60KD
600V
600V
600V
<2.5V
<2.5V
<2.5V
10A
10A
6A
■
Lower on voltage drop (Vcesat)
■
Lower CRES / CIES ratio (no cross-conduction
susceptibility)
■
Very soft ultra fast recovery antiparallel diode
■
Short circuit withstand time 10µs
Description
3
3
1
2
1
TO-220
2
TO-220FP
3
1
D²PAK
Internal schematic diagram
Using the latest high voltage technology based on
a patented strip layout, STMicroelectronics has
designed an advaced family of IGBTs, the
PowerMESH™ IGBTs, with outstanding
performances. The suffix “K” identifies a family
optimized for high frequency motor control
applications with short circuit withstand capability.
Applications
■
High frequency motor controls
■
SMPS and PFC in both hard switch and
resonant topologies
■
Motor drivers
Order codes
Sales Type
Marking
Package
Packaging
STGB10NC60KDT4
GB10NC60KD
D²PAK
Tape & reel
STGP10NC60KD
GP10NC60KD
TO-220
Tube
STGF10NC60KD
GF10NC60KD
TO-220FP
Tube
March 2006
Rev 4
1/17
www.st.com
17
Contents:
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Contents:
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1
Electrical characteristics (curves)
............................. 7
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
1
Electrical ratings
Electrical ratings
Table 1.
Absolute maximum ratings
Value
Symbol
Parameter
Unit
D²PAK/TO-220 TO-220FP
VCES
Collector-Emitter Voltage (VGS = 0)
IC(1)
Collector Current (continuous) at TC = 25°C
20
9
A
IC(1)
Collector Current (continuous) at TC = 100°C
10
6
A
ICM(2)
VGE
IF
600
V
Collector Current (pulsed)
30
A
Gate-Emitter Voltage
±20
V
Diode RMS Forward Current at Tc=25°C
10
A
PTOT
Total Dissipation at TC = 25°C
60
25
VISO
Insulation Withstand Voltage A.C.(t=1sec;Tc=25°C)
--
2500
Tstg
Storage Temperature
Tj
Tscw
Tl
W
– 55 to 150
°C
Short Circuit Withstand Time
10
µs
Maximum Lead Temperature For Soldering
Purpose (for 10sec. 1.6 mm from case)
300
°C
Operating Junction Temperature
1. Calculated according to the iterative formula::
T
–T
J MAX
C
I ( T ) = --------------------------------------------------------------------------------------------------C C
R
×V
(T , I )
THJ – C
CESAT ( MAX ) C C
2. Pulse width limited by max junction temperature
Table 2.
Symbol
Rthj-case
Rthj-amb
Thermal resistance
Parameter
Value
Unit
TO-220/D²PAK
2.08
°C/W
TO-220FP
5.0
°C/W
62.5
°C/W
Thermal Resistance Junction-case Max
Thermal Resistance Junction-ambient Max
3/17
Electrical characteristics
2
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 3.
Symbol
Parameter
VBR(CES)
Collector-Emitter
Breakdown Voltage
VCE(sat)
Collector-Emitter
Saturation Voltage
VGE= 15V, IC= 5A, Tc= 125°C
VGE(th)
Gate Threshold Voltage
VCE= VGE, IC= 250 µA
ICES
Collector cut-off Current
(V GE = 0)
VCE= Max Rating,TC= 25°C
IGES
Gate-Emitter Leakage
Current (VCE = 0)
gfs
Table 4.
Symbol
Cies
Coes
Cres
Qg
Qge
Qgc
4/17
Static
Test Condictions
IC= 1mA, VGE= 0
Min.
Typ.
Max.
600
VGE= 15V, IC= 5A
Unit
V
2
1.8
2.5
V
V
6.5
V
VCE=Max Rating,TC= 125°C
150
1
µA
mA
VGE= ±20V , VCE= 0
±100
nA
4.5
Forward Transconductance VCE = 15V, IC= 5A
15
S
Dynamic
Parameter
Input Capacitance
Output Capacitance
Reverse Transfer
Capacitance
Total Gate Charge
Gate-Emitter Charge
Gate-Collector Charge
Test Condictions
VCE = 25V, f = 1MHz,
VGE = 0
VCE = 390V, IC = 5A,
VGE = 15V,
(see Figure 18)
Min.
Typ. Max.
Unit
380
46
8.5
pF
pF
pF
19
5
9
nC
nC
nC
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Table 5.
Symbol
td(on)
tr
(di/dt)on
td(on)
tr
(di/dt)on
tr(Voff)
td(off)
tf
tr(Voff)
td(off)
tf
Table 6.
Symbol
Eon (1)
Eoff(2)
Ets
Eon (1)
Eoff(2)
Ets
Electrical characteristics
Switching on/off (inductive load)
Parameter
Turn-on Delay Time
Current Rise Time
Turn-on Current Slope
Turn-on Delay Time
Current Rise Time
Turn-on Current Slope
Off Voltage Rise Time
Turn-off Delay Time
Current Fall Time
Off Voltage Rise Time
Turn-off Delay Time
Current Fall Time
Test Condictions
Min.
VCC = 390V, IC = 5A
RG= 10Ω, VGE= 15V, Tj=
25°C
(see Figure 19)
VCC = 390V, IC = 5A
RG= 10Ω, VGE= 15V,
Tj=125°C
(see Figure 19)
Vcc = 390V, IC = 5A,
RGE = 10Ω , VGE =
15V,T J=25°C
(see Figure 19)
Vcc = 390V, IC = 5A,
RGE=10Ω , VGE =15V,
Tj=125°C
(see Figure 19)
Typ.
Max.
Unit
17
6
655
ns
ns
A/µs
16.5
6.5
575
ns
ns
A/µs
33
72
82
ns
ns
ns
60
106
136
ns
ns
ns
Switching energy (inductive load)
Parameter
Turn-on Switching Losses
Turn-off Switching Losses
Total Switching Losses
Turn-on Switching Losses
Turn-off Switching Losses
Total Switching Losses
Test Condictions
VCC = 390V, IC = 5A
RG= 10Ω, V GE=15V,
Tj=25°C
(see Figure 19)
VCC = 390V, IC = 5A
RG= 10Ω, V GE= 15V,
Tj= 125°C
(see Figure 19)
Min.
Typ.
Max.
Unit
55
85
140
µJ
µJ
µJ
87
162
249
µJ
µJ
µJ
1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in
a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the
same temperature (25°C and 125°C)
2. Turn-off losses include also the tail of the collector current
5/17
Electrical characteristics
Table 7.
Symbol
Collector-emitter diode
Parameter
Test Condictions
If = 2.5A
Vf
Forward On-Voltage
trr
Reverse Recovery Time
Reverse Recovery Charge
Reverse Recovery Current
If = 5A ,VR = 30V,
Reverse Recovery Time
Reverse Recovery Charge
Reverse Recovery Current
If = 5A ,VR = 30V,
Qrr
Irrm
trr
Qrr
Irrm
6/17
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
If = 2.5A, Tj = 125°C
Tj = 25°C, di/dt = 100 A/µs
(see Figure 20)
Tj =125°C, di/dt = 100A/µs
(see Figure 20)
Min.
Typ.
Max.
Unit
1.6
1.3
2.1
V
V
23.5
16.5
1.4
ns
nC
A
39
39
2
ns
nC
A
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Electrical characteristics
2.1
Electrical characteristics (curves)
Figure 1.
Output characterisics
Figure 2.
Transfer characteristics
Figure 3.
Transconductance
Figure 4.
Collector-emitter on voltage vs
temperature
Figure 5.
Gate charge vs gate-source voltage Figure 6.
Capacitance variations
7/17
Electrical characteristics
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Figure 7.
Normalized gate threshold voltage
vs temperature
Figure 8.
Collector-emitter on voltage vs
collector current
Figure 9.
Normalized breakdown voltage vs
temperature
Figure 10. Switching losses vs temperature
Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector
current
8/17
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Electrical characteristics
Figure 13. Thermal Impedance for TO-220/
D²PAK
Figure 14. Turn-off SOA
Figure 15. Emitter-collector diode
characteristics
Figure 16. Thermal Impedance for TO-220FP
9/17
Test circuit
3
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Test circuit
Figure 17. Test Circuit for Inductive Load
Switching
Figure 18. Gate charge test circuit
Figure 19. Switching Waveform
Figure 20. Diode Recovery Time Waveform
10/17
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
4
Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
11/17
Package mechanical data
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
TO-220 MECHANICAL DATA
DIM.
mm.
MIN.
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
b
0.61
0.88
0.024
0.034
b1
1.15
1.70
0.045
0.066
c
0.49
0.70
0.019
0.027
D
15.25
15.75
0.60
0.620
E
10
10.40
0.393
0.409
e
2.40
2.70
0.094
0.106
e1
4.95
5.15
0.194
0.202
F
1.23
1.32
0.048
0.052
H1
6.20
6.60
0.244
0.256
J1
2.40
2.72
0.094
0.107
0.551
L
13
14
0.511
L1
3.50
3.93
0.137
L20
16.40
L30
12/17
TYP
0.154
0.645
28.90
1.137
øP
3.75
3.85
0.147
0.151
Q
2.65
2.95
0.104
0.116
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Package mechanical data
D2PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
10.4
0.393
D1
E
8
10
E1
0.315
8.5
0.334
G
4.88
5.28
0.192
0.208
L
15
15.85
0.590
0.625
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
R
0º
0.126
0.015
4º
3
V2
0.4
1
13/17
Package mechanical data
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
TO-220FP MECHANICAL DATA
mm.
DIM.
MIN.
A
4.4
inch
TYP
MAX.
MIN.
TYP.
4.6
0.173
0.181
MAX.
0.106
B
2.5
2.7
0.098
D
2.5
2.75
0.098
0.108
E
0.45
0.7
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.7
0.045
0.067
F2
1.15
1.7
0.045
0.067
G
4.95
5.2
0.195
0.204
G1
2.4
2.7
0.094
0.106
H
10
10.4
0.393
0.409
L2
16
0.630
L3
28.6
30.6
1.126
1.204
L4
9.8
10.6
.0385
0.417
L5
2.9
3.6
0.114
0.141
L6
15.9
16.4
0.626
0.645
9
9.3
0.354
0.366
Ø
3
3.2
0.118
0.126
B
D
A
E
L7
L3
L6
F2
H
G
G1
F
F1
L7
L2
14/17
L5
1 2 3
L4
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
5
Packaging mechanical data
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
MAX.
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
0.933 0.956
* on sales type
15/17
Revision history
6
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Revision history
Table 8.
16/17
Revision history
Date
Revision
Changes
14-Jun-2005
1
New Release
19-Jul-2005
2
Complete version
27-Jan-2006
3
Inserted ecopack indication
01-Mar-2006
4
New template
STGB10NC60KD - STGP10NC60KD - STGF10NC60KD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17
Similar pages