GE GIF2402 Glass passivated plastic rectifier Datasheet

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
GIF2401 THRU GIF2404
GLASS PASSIVATED PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts
Forward Current - 16.0 Amperes
FEATURES
ITO-220AB
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Dual rectifier construction, positive centertap
♦ Glass passivated chip junctions
♦ Low power loss
♦ High surge capability
♦ Superfast recovery times for high efficiency
♦ High temperature soldering guaranteed:
250°C, 0.25" (6.35mm) from case for 10 seconds
0.188 (4.77)
0.172 (4.36)
0.405 (10.27)
0.383 (9.72)
0.110 (2.80)
0.100 (2.54)
0.131 (3.39)
DIA.
0.122 (3.08)
0.140 (3.56)
DIA.
0.130 (3.30)
0.600 (15.5)
0.580 (14.5)
0.670 (17.2)
0.646 (16.4)
PIN
1
2
3
0.350 (8.89)
0.330 (8.38)
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.037 (0.94)
0.027 (0.69)
0.205 (5.20)
0.195 (4.95)
0.105 (2.67)
0.095 (2.41)
MECHANICAL DATA
0.110 (2.80)
0.100 (2.54)
0.060 (1.52)
Case: JEDEC ITO-220AB molded plastic body over
passivated chips
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
Mounting Torque: 5 in. - lbs. max.
0.022 (0.55)
0.014 (0.36)
PIN 2
PIN 1
PIN 3
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
GIF2401
GIF2402
GIF2403
GIF2404
UNITS
Maximum recurrent peak reverse voltage
VRRM
50
100
150
200
Volts
Maximum RMS voltage
VRMS
35
70
105
140
Volts
Maximum DC blocking voltage
VDC
50
100
150
200
Volts
Maximum average forward rectified current
at TC=125°C
I(AV)
16.0
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TC=125°C
IFSM
125.0
Amps
VF
0.975
0.900
0.800
0.895
Volts
IR
50.0
150.0
Maximum reverse recovery time per leg (NOTE1)
trr
35.0
ns
Typical junction capacitance per leg (NOTE 2)
CJ
85.0
pF
5.0
°C/W
Maximum instantaneous forward voltage per leg at:
IF=4A, TJ=25°C
IF=8A, TJ=25°C
IF=4A, TJ=100°C
IF=8A, TJ=100°C
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
4/98
RΘJC
TJ, TSTG
-65 to +150
5.0
500.0
µA
°C
RATINGS AND CHARACTERISTICS CURVES GIF2401 THRU GIF2404
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT PER LEG
20
RESISTIVE OR
INDUCTIVE LOAD
INFINITE HEAT SINK, TC
16
12
8.0
AMBIENT AIR RATING, TA
4.0
0
0
50
100
150
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD CURRENT,
AMPERES
FIG. 1 -FORWARD CURRENT DERATING CURVE
150
8.3ms SINGLE HALF SINE WAVE
(JEDEC Method)
TC=125°C
125
100
75
50
25
0
100
10
1
TEMPERATURE, °C
NUMBER OF CYCLES AT 60 HZ
FIG. 4 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
FIG.3 -TYPICAL REVERSE CHARACTERISTICS
PER LEG
100
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
80
TJ=125°C
10
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
1
0.1
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
JUNCTION CAPACITANCE, pF
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
100
1
10
REVERSE VOLTAGE, VOLTS
°C
125
TJ=
00°C
TJ=1
1
0.1
TJ=25°C
0.01
0
20
40
60
80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
1,000
10
0.1
10
100
100
Similar pages