Vishay GLL4755 Zener diode Datasheet

GLL4735 to GLL4763A
www.vishay.com
Vishay Semiconductors
Zener Diodes
FEATURES
• Plastic package has underwriters laboratory
flammability classification UL 94 V-0
• For surface mounted applications
• Glass passivated chip junction
• Low Zener impedance
• Low regulation factor
• High temperature soldering guaranteed:
250 °C/10 s at terminals
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
PARAMETER
VALUE
UNIT
VZ range nom.
6.2 to 91
V
Test current IZT
2.8 to 41
mA
VZ specification
Pulse current
Int. construction
Single
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
TAPED UNITS PER REEL
MINIMUM ORDER QUANTITY
GLL4735 to GLL4763A
GLL4735 to GLL4763A-series-97
5000 (12 mm tape on 13" reel)
5000/box
GLL4735 to GLL4763A
GLL4735 to GLL4763A-series-96
1500 (12 mm tape on 7" reel)
1500/box
PACKAGE
PACKAGE NAME
MELF DO-213AB (plastic)
WEIGHT
116 mg
MOLDING COMPOUND MOISTURE SENSITIVITY
FLAMMABILITY RATING
LEVEL
UL 94 V-0
MSL level 1
(according J-STD-020)
SOLDERING
CONDITIONS
260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Power dissipation
Zener current
Junction to ambient air
Junction temperature
Storage temperature range
Rev. 1.7, 06-Dec-11
TEST CONDITION
SYMBOL
VALUE
UNIT
Maximum steady state power dissipation is 1 W
at TT = 75 °C
Ptot
1000
mW
RthJA
170
°C/W
Tj
150
°C
Tstg
- 65 to + 150
°C
see table “Characteristics”
Document Number: 85781
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
GLL4735 to GLL4763A
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
ZENER VOLTAGE
RANGE (1)
PART
NUMBER
VZ at IZT1
TEST CURRENT
IZT1
V
IZT2
mA
DC REVERSE
LEAKAGE
CURRENT
IR at VR
μA
NOM.
ZENER
CURRENT (2)
FORWARD
VOLTAGE
at 200 mA
ZZK at IZT2
IZM
VF
mApk
V
MAX.
MAX.
MAX.
MAX.
DYNAMIC RESISTANCE
f = 1 kHz
ZZ at IZT1

V
MAX.
GLL4735
6.2
41
1
50
3
2
700
730
1.2
GLL4736
6.8
37
1
10
4
3.5
700
660
1.2
GLL4737
7.5
34
0.5
10
5
4
700
605
1.2
GLL4738
8.2
31
0.5
10
6
4.5
700
550
1.2
GLL4739
9.1
28
0.5
10
7
5
700
500
1.2
GLL4740
10
25
0.25
10
7.6
7
700
454
1.2
GLL4741
11
23
0.25
5
8.4
8
700
414
1.2
GLL4742
12
21
0.25
5
9.1
9
700
380
1.2
GLL4743
13
19
0.25
5
9.9
10
700
344
1.2
GLL4744
15
17
0.25
5
11.4
14
700
305
1.2
GLL4745
16
15.5
0.25
5
12.2
16
700
285
1.2
GLL4746
18
14
0.25
5
13.7
20
750
250
1.2
GLL4747
20
12.5
0.25
5
15.2
22
750
225
1.2
GLL4748
22
11.5
0.25
5
16.7
23
750
205
1.2
GLL4749
24
10.5
0.25
5
18.2
25
750
190
1.2
GLL4750
27
9.5
0.25
5
20.6
35
750
170
1.2
GLL4751
30
8.5
0.25
5
22.8
40
1000
150
1.2
GLL4752
33
7.5
0.25
5
25.1
45
1000
135
1.2
GLL4753
36
7
0.25
5
27.4
50
1000
125
1.2
GLL4754
39
6.5
0.25
5
29.7
60
1000
115
1.2
GLL4755
43
6
0.25
5
32.7
70
1500
110
1.2
GLL4756
47
5.5
0.25
5
35.8
80
1500
95
1.2
GLL4757
51
5
0.25
5
38.8
95
1500
90
1.2
GLL4758
56
4.5
0.25
5
42.6
110
2000
80
1.2
GLL4759
62
4
0.25
5
47.1
125
2000
70
1.2
GLL4760
68
3.7
0.25
5
51.7
150
2000
65
1.2
GLL4761
75
3.3
0.25
5
56
175
2000
60
1.2
GLL4762
82
3
0.25
5
62.2
200
3000
55
1.2
GLL4763
91
2.8
0.25
5
69.2
250
3000
50
1.2
Notes
(1) Standard voltage tolerance is ± 10 %, suffix A = ± 5 %
(2) Surge current is a non-repetitive, 8.3 ms pulse width square wave or equivalent sine-wave superimposed on I
ZT per JEDEC method
Rev. 1.7, 06-Dec-11
Document Number: 85781
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
GLL4735 to GLL4763A
www.vishay.com
Vishay Semiconductors
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1000
PM(AV) -- Average Power Dissipation (W)
1.0
ZZ -- Dynamic Zener Impedance (Ω)
60Hz
Resistive or
Inductive Load
0.75
0.5
0.25
P.C.B. Mounted on
0.31 x 0.31 x 0.08 " (8 x 8 x 2 mm)
Copper areas pads
0
25
50
18210
75
100
150
125
TJ = 25°C
100
VZ = 30V
10
VZ = 6.2V
1
0.5
175
Terminals Temperature ( °C)
VZ = 91V
VZ = 56V
10
100
500
10
Instantaneous Reverse Current (μA)
Instantaneous Forward Current (A)
10
Fig. 4 - Typical Zener Impedance
Fig. 1 - Maximum Continuous Power Dissipation
1
Pulse Width = 300 s
1% Duty Cycle
TJ = 25°C
0.1
1
TJ = 100°C
0.1
TJ = 25°C
0.01
0.01
0.4
0.6
0.8
1
1.2
1.4
0
1.6
18214
Instantaneous Forward Voltage (V)
18211
Fig. 2 - Typical Instantaneous Forward Characteristics
for GLL4763
VZ -- Temperature Coefficient (mV/°C)
1
IZT -- Zener Test Current (mA)
18213
20
40
60
80
100
Percent of Rated Zener Voltage (%)
Fig. 5 - Typical Reverse Characteristics
110
90
Tested at Rated IZT
70
50
30
10
0
0
10
20
30
40
50
60
70
80
90
100
VZ - Zener Voltage (V)
18212
Fig. 3 - Typical Temperature Coefficients
Rev. 1.7, 06-Dec-11
Document Number: 85781
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
GLL4735 to GLL4763A
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches): MELF DO-213AB (plastic)
1st band
D1 = 2.67 (0.105)
D2 = D1 + 0 - 0.2 (0.008)
2.41 (0.095)
0.56 (0.022)
0.46 (0.018)
5.2 (0.205)
4.7 (0.185)
1st band denotes type and positive end (cathode)
Foot print recommendation:
4 (0.157) max.
3 (0.118) min.
1.25 (0.049) min.
Document-No.: S8-V-3453.03-001 (4)
Created-Date: 13.May.2009
6.5 (0.256) ref.
18268
Rev. 1.7, 06-Dec-11
Document Number: 85781
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Similar pages