GP20A THRU GP20M 2.0 AMPS. Glass Passivated Junction Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes DO-201 Features High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 2.0 amperes operation at TA=55oC and with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data Case: JEDEC DO-201 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.03 ounce, 0.8 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GP GP Type Number 20A 20B Maximum Recurrent Peak Reverse Voltage 50 100 VRRM Maximum RMS Voltage 35 70 VRMS Maximum DC Blocking Voltage 100 50 VDC GP 20D 200 140 200 GP 20G 400 280 400 GP 20J 600 420 600 GP 20K 800 560 800 GP Units 20M 1000 V 700 V 1000 V Maximum Average Forward Rectified Current .375” (9.5mm) Lead Length at TA=55℃ I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 65 A Maximum Instantaneous Forward Voltage @2.0A VF Maximum Full Load Reverse Current at Rated DC Blocking Voltage IR 5.0 uA HTIR 100 uA Trr Cj RθJA TJ,TSTG 2.5 40.0 40 - 65 to + 175 uS pF ℃/W ℃ Maximum Full Load Reverse Current, Full Cycle Average .375”(9.5mm) Lead Length @TA=55℃ Typical Reverse Recovery Time (Note 1) Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range 1.2 1.1 Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B. - 570 - V RATINGS AND CHARACTERISTIC CURVES (GP20A THRU GP20M) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 2.0 60Hz RESISTIVE OR INDUCTIVE LOAD 1.5 1.0 0.375"(9.5mm) LEAD LENGTH 0.5 0 100 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 70 40 20 10 0 25 50 75 100 125 150 175 100 10 1 o AMBIENT TEMPERATURE. ( C) 10 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 Tj=150 0C 1 P2 0D P2 0M G 0 P2 0B 0 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0.1 0.01 0.4 P2 G A- INSTANTANEOUS REVERSE CURRENT. ( A) G -G Tj=125 0C 1 Tj=75 0C 0.1 Tj=25 0C 0.01 0.6 0.8 1.0 1.2 1.4 1.6 0 FORWARD VOLTAGE. (V) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 100 Tj=25 0C f=1.0MHz Vsig=50mVp-p JUNCTION CAPACITANCE.(pF) INSTANTANEOUS FORWARD CURRENT. (A) 10 10 1 10 REVERSE VOLTAGE. (V) - 571 - 100