Sharp GP2Y0A21YK General purpose type distance measuring sensor Datasheet

GP2Y0A21YK/GP2Y0D21YK
■ Outline Dimensions
37
29.5
★
20±0.1
★
R3.75
■ Applications
14.75
7.5
Parameter
Supply voltage
Output terminal voltage
Operating temperature
Storage temperature
Notice
4.15
1
■ Absolute Maximum Ratings
(Ta=25˚C, VCC=5V)
Symbol
Rating
Unit
VCC
−0.3 to +7
V
VO
−0.3 to VCC +0.3
V
Topr
−10 to +60
˚C
Tstg
−40 to +70
˚C
6.3
Lens case
2
R3.75
φ3.2 hole
3.75
Light emitter side 10.1
1. TVs
2. Personal computers
3. Cars
4. Copiers
Light detector side
8.4
7.2
4.5
φ3.2 hole
(Unit : mm)
16.3
3
Connector 1.2
Made by
3.3
J.S.T. MFG,
CO., LTD.
S3B-PH
PWB
2-1.5
13.5
1. Less influence on the color of reflective objects, reflectivity
2. Line-up of distance output/distance judgement type
Distance output type (analog voltage) : GP2Y0A21YK
Detecting distance : 10 to 80cm
Distance judgement type : GP2Y0D21YK
Judgement distance : 24cm
(Adjustable within the range of 10 to 80cm [Optionally available])
3. External control circuit is unnecessary
4. Low cost
13
■ Features
General Purpose Type Distance
Measuring Sensors
+0.5
18.9−0.3
GP2Y0A21YK/
GP2Y0D21YK
Terminal connection
❈ The dimensions marked ★ are
described the dimensions of
lens center position.
❈ Unspecified tolerance : ±0.3mm
1
2
3
VO
GND
VCC
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/
GP2Y0A21YK/GP2Y0D21YK
■ Recommended Operating Conditions
Parameter
Operating supply voltage
Symbol
VCC
Rating
4.5 to +5.5
Unit
V
■ Electro-optical Characteristics
Symbol
Parameter
∆L
Distance measuring range
VO
GP2Y0A21YK
Output terminal voltage
VOH
GP2Y0D21YK
VOL
Difference of output voltage GP2Y0A21YK
∆VO
Distance characteristics
VO
GP2Y0D21YK
of output
Average Dissipation current
MIN.
*1 *3
10
0.25
VCC −0.3
−
1.65
TYP.
−
0.4
−
−
1.9
*1 *4 *2
21
24
27
cm
L=80cm *1
−
30
40
mA
L=80cm *1
Output voltage at High *1
Output voltage at Low*1
Output change at L=80cm to 10cm*1
ICC
(Ta=25˚C, VCC=5V)
MAX.
Unit
80
cm
V
0.55
V
−
V
0.6
V
2.15
Conditions
Note) L : Distance to reflective object
*1 Using reflective object : White paper (Made by Kodak Co. Ltd. gray cards R-27 ⋅ white face, reflective ratio ; 90%)
*2 We ship the device after the following adjustment : Output switching distance L=24cm±3cm must be measured by the sensor
*3 Distance measuring range of the optical sensor system
*4 Output switching has a hysteresis width. The distance specified by Vo should be the one with which the output L switches to the output H
Fig.1 Internal Block Diagram
Fig.2 Internal Block Diagram
GP2Y0A21YK
GP2Y0D21YK
VCC 5V
GND
PSD
PSD
Signal
processing
circuit
LED drive
circuit
Signal
processing
circuit
Voltage
regulator
Oscillation
circuit
LED
VCC 5V
GND
Voltage
regulator
Oscillation
circuit
Vo
Analog output
Output
circuit
LED drive
circuit
LED
Distance measuring IC
Output
circuit
Distance measuring IC
Fig.3 Timing Chart
VCC
(Power supply)
38.3ms±9.6ms
Distance
measuring
operation
First measurment
VO (Output)
Unstable output
Second
measurment
First output
nth
measurment
Second output
5.0msMAX.(GP2Y0A21YK)
7.6ms±1.9msTYP.(GP2Y0D21YK)
nth output
VCC
12kΩ
VO
Digital output
GP2Y0A21YK/GP2Y0D21YK
Fig.4 Distance Characteristics
GP2Y0D21YK
(Detection)
H
L
Output (V)
Output H
Hystersis width
L
Output L
(Non detection)
H
0
5
10 15 20 25
Output switching point distance
L=24±3cm
30
35
40
45
50
55
Distance to reflective object L (cm)
Fig.5 Analog Output Voltage vs. Distance to
Reflective Object
GP2Y0A21YK
3.5
White paper
(Reflective ratio:90%)
Gray paper
(Reflective ratio:18%)
Analog output voltage VO (V)
3
2.5
2
1.5
1
0.5
0
0
10
20
30
40
50
60
Distance to reflective object L (cm)
70
80
60
65
70
75
80
NOTICE
●
The circuit application examples in this publication are provided to explain representative applications of SHARP
devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes
no responsibility for any problems related to any intellectual property right of a third party resulting from the use of
SHARP's devices.
●
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP
reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents
described herein at any time without notice in order to improve design or reliability. Manufacturing locations are
also subject to change without notice.
●
Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage
caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used
specified in the relevant specification sheet nor meet the following conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
- - - Personal computers
- -- Office automation equipment
- -- Telecommunication equipment [terminal]
- - - Test and measurement equipment
- - - Industrial control
- -- Audio visual equipment
- -- Consumer electronics
(ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when
SHARP devices are used for or in connection with equipment that requires higher reliability such as:
- -- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
- - - Traffic signals
- - - Gas leakage sensor breakers
- - - Alarm equipment
- -- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of
reliability and safety such as:
- - - Space applications
- -- Telecommunication equipment [trunk lines]
- -- Nuclear power control equipment
- -- Medical and other life support equipment (e.g., scuba).
●
Contact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications
other than those recommended by SHARP or when it is unclear which category mentioned above controls the
intended use.
●
If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign
Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices.
●
This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright
laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written
permission is also required before any use of this publication may be made by a third party.
●
Contact and consult with a SHARP representative if there are any questions about the contents of this publication.
Similar pages