Frontier GP60-10-LFR 6a general purpose plastic rectifier Datasheet

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: http://www.frontierusa.com
6A GENERAL PURPOSE PLASTIC RECTIFIER
GP60-005-LFR THRU GP60-10-LFR
FEATURES
z HIGH CURRENT LEAD MOUNTED
z DIFFUSED JUNCTION
z HIGH SURGE CAPABILITY
z LOW FORWARD VOLTAGE DROP
z COMPLETELY INSULATED CASE
z UNIFORM MOLDED BODY
z THE PLASTIC MATERIAL CARRIES U/L RECOGNITION 94V-0
z HIGH TEMPERATURE SOLDERING GUARANTEED: 260°C/10S
/0.375” , (9.5mm) LEAD LENGTH/5 LBS. (2.3KG) TENSION
z ROHS
1.0(25.4)
MIN
.052(1.3)
.048(1.2)
.360(9.1)
.340(8.6)
.360(9.1)
.340(8.6)
MECHANICAL DATA
z CASE: MOLDED PLASTIC, P6, DIMENSIONS IN INCHES
AND (MILLIMETERS)
z TERMINAL: AXIAL LEADS, SOLDERABLE PER MIL-STD-202,
METHOD 208
z POLARITY: COLOR BAND DENOTES CATHODE
z MOUNTING POSITION: ANY
z WEIGHT : 2.1 GRAMS
1.0(25.4)
MIN
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
GP60-005 GP60-01 GP60-02 GP60-04 GP60-06 GP60-08 GP60-10
UNITS
RATINGS
SYMBOL
-LFR
-LFR
-LFR
-LFR
-LFR
-LFR
-LFR
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
VRRM
50
100
200
400
600
800
1000
V
MAXIMUM RMS VOLTAGE
VRMS
35
70
140
280
420
560
700
V
MAXIMUM DC BLOCKING VOLTAGE
VDC
50
100
200
400
600
800
1000
V
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
IO
6.0
A
0.375”(9.5mm) LEAD LENGTH AT TA=55°C
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
IFSM
400
A
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
CJ
150
PF
TYPICAL THERMAL RESISTANCE (NOTE 2)
Rθja
10
℃/W
STORAGE TEMPERATURE RANGE
TSTG
- 55 TO + 175
℃
OPERATING TEMPERATURE RANGE
TOP
- 55 TO + 175
℃
ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED)
GP60-005 GP60-01 GP60-02 GP60-04 GP60-06 GP60-08 GP60-10
UNITS
CHARACTERISTICS
SYMBOL
-LFR
-LFR
-LFR
-LFR
-LFR
-LFR
-LFR
MAXIMUM FORWARD VOLTAGE AT IO DC
VF
1.0
V
MAXIMUM REVERSE CURRENT AT 25℃
IR
5
μA
MAXIMUM REVERSE CURRENT AT100℃
IR
50
μA
NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 70×70×1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
GP60-005-LFR THRU GP60-10-LFR
Page: 1
RATINGS AND CHARACTERISTIC CURVE GP60-005-LFR THRU GP60-10-LFR
FIG.2-MAXIMUM FORWARD CURRENT DERATING
CURVE
AVERAGE FORWARD
CURRENT AMPERES
6.0
60 HZ RESISTIVE OR
INDUCTIVE LOADS
5.0
GROUND PLANE
1〞X 1〞COPPER
4.0
SURFACE AREA
3.0
2.0
RECOMMENDED
PC BOARD
MOUNTING
PC
BOARD
AVERAGE FORWARD
CURRENT AMPERES
FIG.1-MAXIMUM FORWARD CURRENT DERATING
CURRENT
RESISTIVE OR INDUCTIVE
LOAD 60 HZ BOTH LEADS
ATTACHED TO HEAT SINKS
WITH LENGTHS AS SHOWN
L=.125〞(3.18mm)
L=.25〞(6.35mm)
20
15
L=.375〞(9.5mm)
10
L=.625〞(15.8mm)
5
1.0
0
25
STANDARD PC
BOARD MOUNTING
0
20
40
60
0
80 100 120 140 160 180
20
40
60
80 100 120 140 160
LEAD TEMPERATURE℃
AMBIENT TEMPERATURE ℃
FIG.4-TYPICAL REVERSE CHARACTERISTICS
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTIC
100
INSTANTANEOUS FORWARD CURRENT
AMPERES
INSTANTANEOUS FORWARD CURRENT
MICROAMPERES
1000
100
TJ=25℃
PULSE WIDTH=300us
1% DUTY CYCLE
10
1.0
0.1
.6
.8
1.0
1.2
1.4
1.6
1.8
10
TJ=100℃
1.0
TJ=25℃
0.1
.01
2.0
8.3 ms SINGLE HALF SINE-WAVE
JEDEC METHOD
500
TJ=25℃
300
200
TJ=150℃
100
0
1
10
100
NUMBER OF CYCLES AT 60 HZ
GP60-005-LFR THRU GP60-10-LFR
TRANSIENT THERMAL IMPEDANCE,
o
C / WATT
PEAK FORWARD SURGE CURRENT
AMPERES
FIG.5-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
400
40
60
80
100
120
PERCENT OF RATED PEAK REVERSE VOLTAGE
INSTANTANEOUS FORWARD VOLTAGE
VOLTS
600
20
FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
100
10
1
0.1
0.01
0.1
1
10
t, PULSE DURATION, sec.
Page: 2
100
Similar pages