Phone: +39-011-988 2251 Fax: +39-011-988 1358 Green Power Solutions Srl Web: www.gpsemi.it e-mail: [email protected] http://gpsemi.it/pdf/GPDD012K.pdf GPDD012K RECTIFIER DIODE Low profile ceramic package Spot welding applications Electroplating applications VOLTAGE UP TO AVERAGE CURRENT SURGE CURRENT BLOCKING CHARACTERISTICS Characteristic VRRM Repetitive peak reverse voltage VRSM Non-repetitive peak reverse voltage IRRM Repetitive peak reverse current, max. Conditions 200 V 12100 A 100 kA Value 200 V 300 V VRRM, single phase, half wave, Tj = Tjmax 50 mA FORWARD CHARACTERISTICS IF(AV) Average forward current Sine wave,180° conduction, Tc = 70°C 12100 A IF(RMS) R.M.S. forward current Sine wave,180° conduction, Tc = 70°C 19007 A IFSM Surge forward current Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax I²t I² t for fusing coordination VF(TO) Threshold voltage Tj = Tjmax 0.75 V rF Forward slope resistance Tj = Tjmax 0.021 mW VFM Peak forward voltage, max Forward current IF = 8000 A, Tj = 25°C 1.01 V 600 µC 100 kA 50000 kA²s SWITCHING CHARACTERISTICS Qrr Rverse recovery charge, typ Tj = Tjmax, IF = 1000 A, di/dt = -30 A/µs Irr Reverse recovery current VR = 50 V trr Reverse recovery time VFP Forward recovery voltage A µs Tj = Tjmax, di/dt = 100 A/µs V THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0.006 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0.003 °C/W Tjmax Max operating junction temperature Tstg Storage temperature F Clamping force ± 10% Mass Document GPDD012KT002 170 °C -40 / 170 °C 35 kN 220 g RECTIFIER DIODE Current rating - sine wave Power loss - sine wave 165 145 PF [W] Case temperature [°C] 185 125 105 85 30° 60° 90° 120° 180° 65 0 5000 GPDD012K 18000 16000 14000 12000 10000 8000 6000 4000 2000 0 180° 60° 5000 10000 IF [A] IF [A] Maximum surge current d.s. cooled Forward voltage drop 120 25000 100 20000 Tj=Tjmax IF [A] 80 IFSM [A] 120° 30° 0 10000 90° 60 15000 10000 40 5000 20 0 0 1 10 100 0 Number of cycle current pulses [n] 0.5 1 VF [V] Thermal Impedance (j-c) 0.007 ZTH(j-c) [°C / W] 0.006 0.005 0.004 0.003 0.002 0.001 0.000 0.001 0.01 0.1 1 10 100 Time [s] Ordering information GPDD012K-VV VV: blocking voltage / 100 (e.g. 02 for 200V) dimensions mm In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GPDD012KT002 1.5