Gulf GPP1J Glass passivated junction rectifier voltage: 50 to 1000v current: 1.0a Datasheet

GPP1A THRU GPP1M
GLASS PASSIVATED
JUNCTION RECTIFIER
VOLTAGE: 50 TO 1000V
CURRENT: 1.0A
FEATURE
DO – 41\DO – 204AL
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C /10sec/0.375" lead length at 5 lbs tension
Glass Passivated chip
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8" lead length at Ta =75°C
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
rated forward current
Maximum full load reverse current
full cycle at TL =75°C
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =100°C
Typical Junction Capacitance
(Note 1)
Operating Temperature
(Note 2)
Storage and Operation Junction Temperature
Vrrm
Vrms
Vdc
GPP
1A
50
35
50
GPP
1B
100
70
100
GPP
1D
200
140
200
GPP
1G
400
280
400
GPP
1J
600
420
600
GPP
1K
800
560
800
GPP
1M
1000
700
1000
units
V
V
V
If(av)
1.0
A
Ifsm
30.0
A
Vf
1.1
V
Ir(av)
30.0
µA
5.0
50.0
15.0
50.0
-55 to +150
µA
µA
Ir
Cj
R(ja)
Tstg, Tj
pF
°C /W
°C
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted
Rev.A4
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES GPP1A THRU GPP1M
1
1
Rev.A4
www.gulfsemi.com
Similar pages