Mean Well GS12E18-P1I 10 ~ 12wac-dc single output wall-mounted type Datasheet

GS12E
10 ~ 12W AC-DC Single Output Wall-mounted type
series
Features :
Universal AC input / Full range
No load power consumption< 0.3W
ErP step2 compliant
Meet EISA 2007 (Energy Independence and Security Act)
2 pole EURO plug
Class
power (without earth pin)
Protections: Short circuit / Overload / Over voltage / Over temperature
Fully enclosed plastic case
Approvals: TUV / CB / CE
Pass LPS for full series
2 years warranty
SPECIFICATION
ORDER NO.
OUTPUT
GS12E05-P1I
GS12E07-P1I
GS12E09-P1I
GS12E12-P1I
GS12E15-P1I
GS12E18-P1I
SAFETY MODEL NO.
GS12E05
GS12E07
GS12E09
GS12E12
GS12E15
GS12E18
GS12E24
DC VOLTAGE
5V
7.5V
9V
12V
15V
18V
24V
RATED CURRENT
2.0A
1.6A
1.33A
1.0A
0.8A
0.67A
0.5A
CURRENT RANGE
0 ~ 2.0A
0 ~ 1.6A
0 ~ 1.33A
0 ~ 1.0A
0 ~ 0.8A
0 ~ 0.67A
0 ~ 0.5A
RATED POWER
10W
12W
12W
12W
12W
12.06W
12W
120mVp-p
150mVp-p
180mVp-p
200mVp-p
RIPPLE & NOISE (max.) Note.2 75mVp-p
GS12E24-P1I
90mVp-p
90mVp-p
VOLTAGE TOLERANCE Note.3
5.0%
4.0%
4.0%
3.0%
3.0%
3.0%
3.0%
LINE REGULATION
Note.4
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
Note.5
5.0%
4.0%
4.0%
3.0%
3.0%
2.0%
2.0%
500ms, 20ms, 10ms/115VAC at full load
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 30ms/230VAC
90 ~ 264VAC
135 ~ 370VDC
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
47 ~ 63Hz
EFFICIENCY (Typ.)
76%
78.5%
AC CURRENT
0.31A / 115VAC
0.16A / 230VAC
INRUSH CURRENT (max.)
COLD START 25A / 115VAC
LEAKAGE CURRENT (max.)
0.25mA / 240VAC
>105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE Note.6
78.5%
78.5%
80%
80%
80.5%
45A / 230VAC
115% ~ 135%
Protection type : Clamp by zener diode
U1 Tj 140 typically (U1) Detect on main control IC
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
0 ~ +50
WORKING HUMIDITY
20% ~ 90% RH non-condensing
(Refer to "Derating Curve")
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03% / (0 ~ 40 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
VIBRATION
SAFETY STANDARDS
TUV EN60950 -1 approved
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
EMC
EMC EMISSION
EMC IMMUNITY
MTBF
I/P-O/P:3KVAC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022, EN61204-3, EN61000-3-2,3, FCC part15 class B
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61204-3, light industry level, criteria A
1414.6Khrs min. MIL-HDBK-217F (25 )
OTHERS
DIMENSION
PACKING
65*47*26.5mm (L*W*H)
0.15Kg ; 100pcs / 16Kg / CARTON
PLUG
Standard type P1I: 2.1
CABLE
Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested
CONNECTOR
NOTE
* 5.5
* 9.5mm turning fork type, center positive for stock ; Other type available by customer requested
1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation is measured from 10% to 100% rated load.
6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification
provided by the IC manufacturer.
File Name:GS12E-SPEC 2011-06-14
GS12E
10 ~ 12W AC-DC Single Output Wall-mounted type
Mechanical Specification
series
Unit:mm
UL1185 16AWG 1230 50mm for 5V~9V
UL1185 18AWG 1830 50mm for 12V~24V
37.2 1
26.5 1
30 10mm
65 1
47 1
ID 2.1 x OD 5.5
C"+"
9.5 0.5mm
Plug Assignment
Standard plug: P1I
P1I
Derating Curve
+
20
30
Ta (
40
)
50
32
300
28
250
24
200
20
150
16
100
12
50
8
25
50
70
90
110
120
140
160
180
200
220
240
OUTPUT RIPPLE (mVp-p)
OUTPUT VOLTAGE (V)
LOAD (%)
70
10
OUTPUT
Static Characteristics(24V)
100
0
P/N
CENTER
264
INPUT VOLTAGE(VAC)60Hz
File Name:GS12E-SPEC 2011-06-14
Similar pages