Mean Well GS25U18 20~25wac-dc single output wall-mounted type Datasheet

GS25U
20~25W AC-DC Single Output Wall-mounted type
series
Features :
Universal AC input / Full range
No load power consumption<0.5W
Pass energy star(CEC) level
regulation
Meet EISA 2007 (Energy Independence and Security Act)
2 pole USA plug
Class
power (without earth pin)
Full output 5~48V safety approval
Protections: Short circuit / Overload / Over voltage
Fully enclosed plastic case
LED indicator for power on
Approvals: UL / CUL / BSMI / CB / FCC
Pass LPS for 9~48V output
2 years warranty
SPECIFICATION
ORDER NO.
GS25U05-P1J GS25U07-P1J GS25U09-P1J GS25U12-P1J GS25U15-P1J GS25U18-P1J GS25U24-P1J GS25U28-P1J GS25U48-P1J
SAFETY MODEL NO.
DC VOLTAGE
OUTPUT
GS25U05
Note.2 5V
GS25U07
GS25U09
GS25U12
GS25U15
GS25U18
GS25U24
GS25U28
7.5V
9V
12V
15V
18V
24V
28V
48V
0.52A
RATED CURRENT
4.0A
2.93A
2.77A
2.08A
1.66A
1.38A
1.04A
0.89A
CURRENT RANGE
0 ~ 4.0A
0 ~ 2.93A
0 ~ 2.77A
0 ~ 2.08A
0 ~ 1.66A
0 ~ 1.38A
0 ~ 1.04A
0 ~ 0.89A
0 ~ 0.52A
RATED POWER (max.)
20W
22W
25W
25W
25W
25W
25W
25W
25W
100mVp-p
150mVp-p
180mVp-p
240mVp-p
240mVp-p
80mVp-p
80mVp-p
80mVp-p
VOLTAGE TOLERANCE Note.4
RIPPLE & NOISE (max.) Note.3 50mVp-p
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
LINE REGULATION
Note.5
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
Note.6
5.0%
5.0%
5.0%
3.0%
3.0%
3.0%
2.0%
2.0%
2.0%
SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC
VOLTAGE RANGE
90 ~ 264VAC 135 ~ 370VDC
FREQUENCY RANGE
INPUT
74%
AC CURRENT
INRUSH CURRENT (max.)
0.7A / 100VAC
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE
(Note. 7)
CONNECTOR
NOTE
500ms, 20ms, 15ms/115VAC at full load
47 ~ 63Hz
EFFICIENCY (Typ.)
LEAKAGE CURRENT(max.)
OTHERS
GS25U48
78%
79%
81%
82%
82%
83%
83%
84%
25A / 115VAC
0.25mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
105 ~ 135% rated output voltage
Protection type : Clamp by zener diode
0 ~ +50 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.03% / (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, CSA C22.2, BSMI, CNS14336 approved
I/P-O/P:4242VDC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
EMI CONDUCTION & RADIATION Compliance to FCC PART 15 / CISPR22 class B, CNS13438 class B
500Khrs min. MIL-HDBK-217F(25 )
MTBF
DIMENSION
79*54*33mm (L*W*H)
210g ; 60pcs / 13.5kg / CARTON
PACKING
Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested
PLUG
CABLE
Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested
1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% rated load
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:GS25U-SPEC 2008-06-04
GS25U
20~25W AC-DC Single Output Wall-mounted type
Mechanical Specification
series
Unit:mm
17
UL1185 16AWG 1230 50mm for 5V
UL1185 18AWG 1830 50mm for 7.5~48V
70 10mm
POWER LED
C"+"
11 0.5mm
ID 2.1 x OD 5.5
NAME PLATE
Plug Assignment
33
79
Standard plug: P1J (option)
54
P1J
Derating Curve
OUTPUT
CENTER
+
Static Characteristics
100
100
LOAD (%)
LOAD (%)
P/N
70
0
10
20
30
Ta (
40
)
50
80
60
0
50
60
70
80
90 100
260
INPUT VOLTAGE
File Name:GS25U-SPEC 2008-06-04
Similar pages