Pan Jit GS2GF Surface mount rectifier Datasheet

GS2GF~GS2MF
SURFACE MOUNT RECTIFIER
VOLTAGE
400~1000 Volts
2 Amperes
CURRENT
FEATURES
• For surface mounted applications in order to optimize board space
• Easy pick and place
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• Low Forward Drop
• High temperature soldering : 260°C /10 seconds at terminals
• Glass Passivated Chip Junction
• Ultra Thin Profile Package for Space Constrained Utilization
• Package suitable for Automated Handling
• Lead free in comply with EU RoHS 2011/65/EU directives
• Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DATA
•
•
•
•
•
Case: SMAF molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
Polarity: Color band denotes cathode end
Standard packaging: 12mm tape (EIA-481)
Weight: 0.0011 ounce, 0.0328 gram
1
Cathode
2
Anode
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
PA RA ME TE R
S YM B OL
GS 2 GF
GS 2 J F
GS 2 K F
GS 2 M F
UNITS
Ma xi m um Re c urre nt P e a k Re ve r s e Vo lt a g e
V RR M
400
600
800
1000
V
Ma xi m um RM S Vo lt a g e
V RM S
280
420
560
700
V
Ma xi m um D C B lo c k i ng Vo lta g e
V DC
400
600
800
1000
V
Ma xi m um A ve ra g e F o r wa rd C urre nt
IF ( AV )
2
A
P e a k F o rw a rd S urg e C urr e nt : 8 . 3 ms s i ng le ha lf s i ne -wa ve
s up e ri m p o s e d o n ra t e d lo a d (J E D E C me t ho d )
IF S M
70
A
Ma xi m um F o rwa r d Vo lta g e a t 2 A
VF
1 .1
V
Ma xi m um D C Re ve rs e C urr e nt a t Ra t e d D C B lo c k i ng
Vo lt a g e
IR
1
A
Typ i c a l J unc t i o n C a p a c i t a nc e (V R = 4 V, f= 1 M Hz)
CJ
18
pF
RJL
RJA
25
150
T J ,T S TG
-5 5 to + 1 5 5
Typ i c a l The rma l Re s t i s ta nc e
( No te s 1 )
( No te s 2 )
Op e r a ti ng a nd S to r a g e Te mp e ra t ur e Ra ng e
O
C /W
O
C
NOTES : 1. Mounted on an FR4 PCB, single-sided copper, with 100cm 2 copper pad area
2. Mounted on an FR4 PCB, single-sided copper, mini pad.
April 3,2013-REV.00
PAGE . 1
2.5
2
1.5
1
0.5
0
0
25
50
75
100
125
150
TC, Case Temperature (°C)
CJ, Junction Capacitance (pF)
IF, Forward Current (A)
GS2GF~GS2MF
Fig.1 Forward Current Derating Curve
TJ = 125°C
1
TJ = 75°C
0.1
TJ = 25°C
0.01
100 200 300 400 500 600 700 800 900 1000
Rated Peak Reverse Voltage (V)
Fig.3 Typical Reverse Characteristics
April 3,2013-REV.00
1
1
10
100
VR, Reverse Bias Voltage (V)
10
IF, Forward Current (A)
IR, Reverse Current (μA)
10
10
Fig.2 Typical Junction Capacitance
100
TJ = 150°C
100
TJ = 150°C
1
TJ = 125°C
TJ = 75°C
0.1
TJ = 25°C
0.01
0.4
0.6
0.8
1
1.2
VF, Forward Voltage (V)
Fig.4 Typical Forward Characteristics
PAGE . 2
GS2GF~GS2MF
MOUNTING PAD LAYOUT
0.232
(5.9)
0.063
(1.6)
0.075
(1.9)
0.106
(2.7)
ORDER INFORMATION
• Packing information
T/R - 10K per 13" plastic Reel
T/R - 3K per 7" plastic Reel
April 3,2013-REV.00
PAGE . 3
GS2GF~GS2MF
Part No_packing code_Version
GS2GF_R1_00001
GS2GF_R2_00001
For example :
RB500V-40_R2_00001
Serial number
Part No.
Version code means HF
Packing size code means 13"
Packing type means T/R
Packing Code XX
Packing type
Tape and Ammunition Box
(T/B)
Tape and Reel
(T/R)
Bulk Packing
(B/P)
Tube Packing
(T/P)
Tape and Reel (Right Oriented)
(TRR)
Tape and Reel (Left Oriented)
(TRL)
FORMING
April 3,2013-REV.00
Version Code XXXXX
1st Code
Packing size code
A
N/A
0
HF
0
serial number
R
7"
1
RoHS
1
serial number
B
13"
2
T
26mm
X
S
52mm
Y
L
F
PANASERT T/B CATHODE UP
(PBCU)
PANASERT T/B CATHODE DOWN
(PBCD)
2nd Code HF or RoHS 1st Code 2nd~5th Code
U
D
PAGE . 4
GS2GF~GS2MF
Disclaimer
• Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
• Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
• Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
• Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
• Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications.
Panjit International Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
•
The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
• Since Panjit uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
April 3,2013-REV.00
PAGE . 5
Similar pages