Gulf GU1K Surface mount switching rectifier voltageï¼ 50 to 1000v currentï¼ 1.0a Datasheet

GU1A THRU GU1M
SURFACE MOUNT
SWITCHING RECTIFIER
VOLTAGE:
:50 TO 1000V
CURRENT:
: 1.0A
SMA/
/DO-214AC
FEATURE
Ideal for surface mount pick and place application
Low profile package
Built-in strain relief
High surge capability
High temperature soldering guaranteed
260℃/10sec/at terminals
Glass passivated chip
Fast recovery time for high efficiency
MECHANICAL DATA
Terminal:Plated axial leads solderable per
MIL-STD 202E, method 208C
Case:Molded with UL-94 class V-0 recognized Flame
Retardant Epoxy
Polarity:color band denotes cathode
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated,
for capacitive load, derate current by 20%)
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8″lead length at TL =110℃
Peak Forward Surge Current 8.3ms single
half sine- wave superimposed on rated load
Maximum Forward Voltage at rated forward
current
Maximum DC Reverse Current
Ta =25℃
at rated DC blocking voltage
Ta =100℃
Maximum Reverse Recovery Time (Note1 )
Typical Junction Capacitance
(Note 2)
Typical Thermal Resistance
(Note 3)
Storage and Operating Junction Temperature
SYMBOL
GU
1A
GU
1B
GU
1D
GU
1G
GU
1J
GU
1K
GU
1M
units
200
400
600
800
1000
V
Vrrm
50
100
Vrms
35
70
140
280
420
560
700
V
Vdc
50
100
200
400
600
800
1000
V
If(av)
1.0
A
Ifsm
30.0
A
Vf
1.0
1.4
V
10.0
500.0
Ir
Trr
1.7
50
μA
μA
75
nS
Cj
15.0
pF
R(jl)
30.0
℃/W
Tstg, Tj
-50 to +150
℃
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area1
1Rev.A5
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES GU1A THRU GU1M
2
2
Rev.A5
www.gulfsemi.com
Similar pages