NKK GW12LBV Ultra-thin rocker Datasheet

Ultra-Thin Rockers
Series GW
Distinctive Characteristics
Various colored rockers and paddles.
Combination of dust cover and closely fit housing, actuator,
and interior pivot provides protection for contacts.
Detent mechanism design of coil spring,
plunger, and plastic detent results in
crisp and positive actuation.
Extremely thin size allows high density
PCB mounting and makes these switches
ideal for handheld equipment.
Award-winning STC contact mechanism with
benefits unavailable in conventional mechanisms: smoother, positive detent actuation,
increased contact stability and unparalleled
logic-level reliability. (Additional STC details
in Terms & Acronyms; see Supplement
section.)
Molded-in, epoxy sealed terminals lock out flux and
other contaminants.
.100” x .100” (2.54mm x 2.54mm) terminal spacing conforms
to standard PC board grid spacing for straight and angle mounting.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Ultra-Thin Rockers
Series GW
General Specifications
Electrical Capacity (Resistive Load)
Logic Level:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Angle of Throw:
Materials & Finishes
Actuator:
Case:
Sealing Ring:
Movable Contact:
Stationary Contacts:
Base:
Mounting Bracket:
Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
PCB Processing
Soldering:
Cleaning:
Standards & Certifications
Flammability Standards:
UL Recognition
or CSA Certification:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
80 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
50,000 operations minimum
50,000 operations minimum
For Rockers 1.70N; for Paddles 1.30N
28°
Glass fiber reinforced polyamide (UL94V-0)
Glass fiber reinforced polyamide (UL94V-0)
Nitrile butadiene rubber
Phosphor bronze with gold plating
Phosphor bronze with gold plating
Glass fiber reinforced polyamide (UL94V-0)
Phosphor bronze with tin plating
Phosphor bronze with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Wave Soldering Recommended: See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section..
These devices are not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 actuator & case/base
The GW Series rockers have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series GW
Ultra-Thin Rockers
TYPICAL SWITCH ORDERING EXAMPLE
GW
1
2
C
R
P
PC TERMINALS
ACTUATOR COLORS
ACTUATORS
POLES
1
CIRCUIT
SPDT
2
DPDT
2
ON
NONE
ON
B
White
P
Straight
R
Rocker
C
Red
H
Right Angle
L
Paddle
H
Gray
V
Vertical
DESCRIPTION FOR TYPICAL ROCKER ORDERING EXAMPLE
GW12RCP
Red Rocker Cap
SPDT
ON-NONE-ON Circuit
Straight PC Terminals
POLES & CIRCUIT
Rocker Position
Connected Terminals
Throw & Schematics
Note: Terminal numbers are not
actually on the switch.
Up
Center
Down
Up
Center
Down
Pole
Model
SP
GW12
ON
NONE
ON
5-6
OPEN
5-4
SPDT
DP
GW22
ON
NONE
ON
5-6 2-3
OPEN
5-4 2-1
DPDT
5 (COM)
4
6
5
4
2
(COM)
6
1
3
TYPICAL SWITCH DIMENSIONS
Straight PC
(0.25) Typ
.010
(3.0)
.118
(7.0)
.276
(1.35)
.053
P/N This Side
(0.4) Dia Typ
.016
Single Pole
1
3
(0.25) Typ
.010
6
(2.54)
.100 4
(4.5)
.177
(2.3)
.091
(7.0)
.276
(2.54) Typ
.100
5
(2.54) Typ
.100
6
(2.6)
.102
(2.54)
.100
(0.6) Dia Typ
.024
On single pole models positions 1 & 3 are support pins.
GW12RCP
Straight PC
4
5
28°
(0.25) Typ
.010
(7.0)
.276
(2.6)
.102
(0.25) Typ
.010
Double Pole
(3.0)
.118
P/N This Side
(0.4) Dia Typ
.016
28°
1
4
2
5
3
6
(2.54)
.100
(2.54) Typ
.100
(4.5)
.177
(3.8)
.150
(7.0)
.276
(2.6)
.102
(2.54)
.100
4
1
5
2
6
3
(2.54) Typ
.100
(0.6) Dia Typ
.024
GW22LCP
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Ultra-Thin Rockers
Series GW
TYPICAL SWITCH DIMENSIONS
Right Angle PC
Single Pole
28°
(7.0)
.276
(0.25)
.010
P/N This Side
(0.5) Typ
.020
(2.54) Typ
.100
4
(4.5)
.177
(3.0)
.118
(5.15)
.203 (2.9)
.114
(2.75)
.108
(5.08)
.200
(7.5)
.295
6
5
6
(5.08)
.200
4
(0.25)
.010
(5.08)
.200
(7.68)
.302
(2.3)
.091
5
(0.6) Dia Typ
.024
(0.4) Dia Typ
.016
(2.54) Typ
.100
GW12RCH
Right Angle PC
Double Pole
28°
(7.0)
.276
(0.25)
.010
P/N This Side
3
(3.0)
.118
(5.15)
.203 (2.9)
.114
(0.5) Typ
.020
GW22LCH
2
1
(2.54) Typ
.100
(4.5)
.177
(2.6)
.102
(2.75)
.108
(5.08)
.200
(7.5)
.295
(3.8)
.150
Vertical PC
(0.25)
.010
(5.08)
.200
(10.22)
.402
6
5
2
3
4
5
6
(0.6) Dia Typ
.024
4
(0.5)
.020
(2.54)
.100
1
(2.54)
.100
(5.08)
.200
(0.4) Dia Typ
.016
(2.54) Typ
.100
Single Pole
(0.25) Typ
.010
(4.5)
.177
(1.35)
.053
P/N This Side
4
(7.65)
.301 (4.15)
.163
5
28°
(0.25)
.010
(5.0)
.197
(5.08)
.200
(12.76)
.502
(2.3)
.091
GW12RCV
Vertical PC
(2.54) Typ
.100
5
6
6
(2.75)
.108
(0.5) Typ
.020
(2.54)
.100
(2.54)
.100 4
(0.6) Dia Typ
.024
(0.5) Typ
.020
(2.54) Typ
.100
(5.08)
.200
(0.4) Dia
.016
(1.27)
.050
CL
Double Pole
(0.25) Typ
.010
(4.5)
.177
(7.65)
.301 (4.15)
.163
P/N This Side
28°
1
2
4
5
3
6
(2.75)
.108
(0.5) Typ
.020
(2.54)
.100
(0.25)
.010
(5.0)
.197
(3.8)
.150
(5.08)
.200
(12.76)
.502
(0.5) Typ
.020
(2.54) Typ
.100
(2.54)
.100
4
1
5
2
6
3
(0.6) Dia Typ
.024
(2.54) Typ
.100
(5.08)
.200
(0.4) Dia
.016
(2.54)
.100
GW22LCV
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Similar pages