Vishay H11AA1-X006 Optocoupler, phototransistor output, ac input with base connection Datasheet

H11AA1
Vishay Semiconductors
Optocoupler, Phototransistor Output, AC Input,
with Base Connection
FEATURES
• AC or polarity insensitive input
A/C
1
6 B
C/A
2
5 C
NC
3
4 E
• Built-in reverse polarity input protection
• I/O compatible with integrated circuits
• Industry standard DIP package
• Isolation test voltage: 5300 VRMS
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
V
D E
21842-1
i179010-2
APPLICATIONS
• Telephone line detection
DESCRIPTION
• AC line motor
The H11AA1 is a bi-directional input optically coupled
isolator consisting of two inverse parallel gallium arsenide
infrared LEDs coupled to a silicon NPN phototransistor in a
6 pin DIP package. The H11AA1 has a minimum CTR of
20 %, a CTR symmetry of 1:3 and is designed for
applications requiring detection or monitoring of AC signals.
• PLC
• Instrumentation
AGENCY APPROVALS
• UL1577, file no. E52744 system code H, double protection
• CSA 93751
• BSI IEC 60950; IEC 60065
• DIN EN 60747-5-2 (VDE0884)/DIN EN 60747-5-5 (pending),
available with option 1
• FIMKO
ORDERING INFORMATION
H
1
1
A
A
1
-
PART NUMBER
X
0
0
#
PACKAGE OPTION
DIP-#
Option 6
7.62 mm
10.16 mm
Option 7
Option 9
T
TAPE AND
REEL
> 0.7 mm
AGENCY CERTIFIED/PACKAGE
> 0.1 mm
CTR (%)
 20
UL, cUL, BSI, FIMKO
DIP-6
H11AA1
DIP-6, 400 mil, option 6
H11AA1-X006
SMD-6, option 7
H11AA1-X007T (1)
SMD-6, option 9
H11AA1-X009T (1)
 20
VDE, UL, cUL, BSI, FIMKO
DIP-6
H11AA1-X001
Note
• Additional options may be possible, please contact sales office.
(1) Also available in tubes; do not add T to end.
Document Number: 83608
Rev. 1.7, 23-Feb-11
For technical questions, contact: [email protected]
www.vishay.com
1
H11AA1
Vishay Semiconductors Optocoupler, Phototransistor Output,
AC Input, with Base Connection
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
IF
± 60
mA
Pdiss
100
mW
1.3
mW/°C
INPUT
Forward continuous current
Power dissipation
Derate linearly from 25 °C
OUTPUT
Power dissipation
Pdiss
200
mW
2.6
mW/°C
30
V
Derate linearly from 25 °C
Collector emitter breakdown voltage
BVCEO
Emitter base breakdown voltage
BVEBO
5
V
Collector base breakdown voltage
BVCBO
70
V
VISO
5300
VRMS
COUPLER
Between emitter and detector,
referred to standard climate
23 °C/50% RH, DIN 50014
Isolation test voltage (RMS)
Creepage distance
7
mm
Clearance distance
7
mm
Comparative tracking index
per DIN IEC 112/VDE 0303, part 1
CTI
175
VIO = 500 V, Tamb = 25 °C
RIO
 1012
VIO = 500 V, Tamb = 100 °C
RIO
 1011

Storage temperature range
Tstg
- 55 to + 150
°C
Operating temperature range
Tamb
- 55 to + 100
°C
Lead soldering time at 260 °C
Tsld
10
s
Isolation resistance

Note
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
ELECTRICAL CHARACTERISTCS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
IF = ± 10 mA
VF
MIN.
TYP.
MAX.
UNIT
1.2
1.5
V
INPUT
Forward voltage
OUTPUT
Collector emitter breakdown voltage
IC = 1 mA
BVCEO
30
V
Emitter base breakdown voltage
IE = 100 μA
BVEBO
5
V
Collector base breakdown voltage
IC = 100 μA
BVCBO
70
V
Collector emitter leakage current
VCE = 10 V
ICEO
IF = ± 10 mA, IC = 0.5 mA
VCEsat
5
100
nA
0.4
V
COUPLER
Collector emitter saturation voltage
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
DC current transfer ratio
Symmetry
(CTR at + 10 mA)/(CTR at - 10 mA)
www.vishay.com
2
TEST CONDITION
SYMBOL
MIN.
IF = ± 10 mA, VCE = 10 V
CTRDC
20
TYP.
0.33
For technical questions, contact: [email protected]
MAX.
UNIT
%
1
3
Document Number: 83608
Rev. 1.7, 23-Feb-11
H11AA1
Optocoupler, Phototransistor Output, Vishay Semiconductors
AC Input, with Base Connection
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.5
IF - LED Forward Current (mA)
60
Normalized to:
VCE = 10 V, IF = 10 mA
TA = 70 °C
CTRce(sat) VCE = 0.4 V
NCTR - Normalized
40
85 °C
20
25 °C
0
- 55 °C
- 20
1.0
0.5
NCTR(SAT)
- 40
NCTR
- 60
- 1.5
- 1.0
- 0.5
0.0
0.5
1.0
1.5
VF - LED Forward Voltage (V)
ih11aa1_01
0.0
0.1
Fig. 1 - LED Forward Current vs.Forward Voltage
100
1.5
Normalized to:
VCE = 10 V, IF = 10 mA
TA = 85 °C
CTRce(sat) VCE = 0.4 V
VCE = 10 V, IF = 10 mA
TA = 25 °C
1.0
CTRce(sat) VCE = 0.4 V
0.5
NCTR(SAT)
NCTR
0.0
0.1
ih11aa1_02
1
10
NCTR - Normalized CTR
Normalized to:
100
IF - LED Current (mA)
1.0
0.5
NCTR(SAT)
NCTR
0.0
0.1
1
Fig. 2 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
10
100
IF - LED Current (mA)
ih11aa1_05
Fig. 5 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
35
1.5
Normalized to:
VCE = 10 V, IF = 10 mA
TA = 50 °C
CTRce(sat) VCE = 0.4 V
1.0
0.5
NCTR(SAT)
NCTR
0.0
ICE - Collector Current (mA)
NCTR - Normalized CTR
10
Fig. 4 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
1.5
NCTR - Normalized CTR
1
IF - LED Current (mA)
ih11aa1_04
30
25
50 °C
20
70 °C
25 °C
15
100 °C
10
5
0
0.1
ih11aa1_03
1
10
100
IF - LED Current (mA)
Fig. 3 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Document Number: 83608
Rev. 1.7, 23-Feb-11
0
ih11aa1_06
10
20
30
40
50
60
IF - LED Current (mA)
Fig. 6 - Collector Emitter Current vs.
Temperature and LED Current
For technical questions, contact: [email protected]
www.vishay.com
3
H11AA1
Vishay Semiconductors Optocoupler, Phototransistor Output,
AC Input, with Base Connection
10
ICEO - Collector Emitter (nA)
105
103
102
VCE = 10 V
101
TYPICAL
100
10-1
10-2
- 20
0
20
40
60
80
IF = 10 mA
1
0.1
Fig. 7 - Collector Emitter Leakage Current vs. Temperature
10
100
Fig. 10 - Normalized Photocurrent vs. LED Current
2.0
70 °C
Normalized to:
IF = 10 mA
50 °C
NhFE(sat) - Normalized
Saturated hFE
NCTRcb - Normalized CTRcb
1
IF - LED Current (mA)
ih11aa1_10
1.5
VCB = 9.3 V
1.0
0.5
25 °C
50 °C
70 °C
1.5 25 °C
Normalized to:
Ib = 20 µA
VCE = 10 V
1.0
VCE = 0.4 V
0.5
0.0
0.0
0.1
1
10
1
100
10
ih11aa1_11
IF - LED Current (mA)
ih11aa1_08
Fig. 8 - Normalized CTRcb vs. LED Current and Temperature
100
1000
Ib - Base Current (µA)
Fig. 11 - Normalized Saturated hFE vs.
Base Current and Temperature
1.5
1000
100
ICB = 1.0357 x IF ^ 1.3631
NhFE(sat) Normalized
Saturated hFE
Icb - Collector Base
Photocurrent (µA)
NIB - Ta = - 20 °C
NIb, Ta = 25 °C
NIb, Ta = 50 °C
NIb, Ta = 70 °C
0.01
0.1
100
Tamb - Ambient Temperature (°C)
ih11aa1_07
Normalized to:
Normalized Photocurrent
104
10
1
0.1
70 °C
50 °C
1.0
Normalized to:
VCE = 10 V
IB = 20 µA
- 25 °C
- 20 °C
0.5
VCE = 0.4 V
0.0
0.01
0.1
ih11aa1_09
1
10
100
IF - LED Current (mA)
Fig. 9 - Collector Base Photocurrent vs. LED Current
www.vishay.com
4
1
ih11aa1_12
10
100
1000
Ib - Base Current (µA)
Fig. 12 - Normalized Saturated hFE vs.
Base Current and Temperature
For technical questions, contact: [email protected]
Document Number: 83608
Rev. 1.7, 23-Feb-11
H11AA1
Optocoupler, Phototransistor Output, Vishay Semiconductors
AC Input, with Base Connection
2.5
IF = 10 mA
VCC = 5 V, VTH = 1.5 V
tPHL
100
2.0
1.5
10
tPLH
1.0
100
1
0.1
ih11aa1_13
1
tpHL - Propagation Delay (µs)
tp - Propagation Delay (µs)
1000
10
RL - Collector Load Resistor (kΩ)
Fig. 13 - Propagation Delay vs. Collector Load Resistor
IF
tD
tR
VO
tPLH
VTH = 1.5 V
tF
tS
tPHL
ih11aa1_14
Fig. 14 - Switching Waveform
VCC = 5 V
F = 10 kHz,
DF = 50 %
RL
VO
IF = 10 mA
ih11aa1_15
Fig. 15 - Switching Schematic
Document Number: 83608
Rev. 1.7, 23-Feb-11
For technical questions, contact: [email protected]
www.vishay.com
5
H11AA1
Vishay Semiconductors Optocoupler, Phototransistor Output,
AC Input, with Base Connection
PACKAGE DIMENSIONS in millimeters
3
2
1
4
5
6
Pin one ID
6.4 ± 0.1
ISO method A
8.6 ± 0.1
7.62 typ.
1.2 ± 0.1
1 min.
3.555 ± 0.255
18°
4° typ.
2.95 ± 0.5
0.8 min.
0.85 ± 0.05
0.5 ± 0.05
0.25 typ.
3° to 9°
7.62 to 8.81
i178004
2.54 typ.
Option 6
Option 7
Option 9
7.62 typ.
7.62 typ.
10.3 max.
7.62 typ.
0.7 min.
3.5 ± 0.3
4.3 ± 0.3
0.1 ± 0.1
3.6 ± 0.3
0.1 min.
8 min.
2.55 ± 0.25
0.6 min.
10.3 max.
0.6 min.
8 min.
10.16 typ.
0.76
R 0.25
2.54
0.76
R 0.25
2.54
1.78
8 min.
11.05
20802-24
1.52
1.78
8 min.
11.05
1.52
PACKAGE MARKING
H11AA1
V YWW H 68
21764-106
Notes
• Only options 1 and 7 are reflected in the package marking.
• The VDE Logo is only marked on option1 parts.
• Tape and reel suffix (T) is not part of the package marking.
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 83608
Rev. 1.7, 23-Feb-11
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Similar pages