Fairchild H11L1MTV 6-pin dip optoisolators logic output Datasheet

6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
H11L3M
PACKAGE
SCHEMATIC
6 VCC
ANODE 1
6
6
CATHODE 2
1
5 GND
1
4 VO
3
6
1
Truth Table
DESCRIPTION
The H11LXM series has a high speed integrated circuit detector optically
coupled to a gallium-arsenide infrared emitting diode. The output incorporates a Schmitt trigger, which provides hysteresis for noise immunity and
pulse shaping. The detector circuit is optimized for simplicity of operation
and utilizes an open collector output for maximum application flexibility.
Input
Output
H
L
L
H
FEATURES
• High data rate, 1 MHz typical (NRZ)
• Free from latch up and oscilliation throughout voltage and temperature
ranges.
• Microprocessor compatible drive
• Logic compatible output sinks 16 mA at 0.4 V maximum
• Guaranteed on/off threshold hysteresis
• Wide supply voltage capability, compatible with all popular logic systems
• Underwriters Laboratory (UL) recognized—file #E90700, Volume 2
• VDE recognized – File#102497 – Add option V (e.g., H11LIVM)
APPLICATIONS
•
•
•
•
•
•
Logic to logic isolator
Programmable current level sensor
Line receiver—eliminate noise and transient problems
A.C. to TTL conversion—square wave shaping
Digital programming of power supplies
Interfaces computers with peripherals
© 2003 Fairchild Semiconductor Corporation
Page 1 of 9
3/24/03
6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
H11L3M
ABSOLUTE MAXIMUM RATINGS
Parameters
Symbol
Device
Value
Units
Storage Temperature
TSTG
All
-55 to +150
°C
Operating Temperature
TOPR
All
-40 to +85
°C
Lead Solder Temperature
TSOL
All
260 for 10 sec
°C
PD
All
Continuous Forward Current
IF
Reverse Voltage
TOTAL DEVICE
Total Device Power Dissipation @ 25°C
250
mW
2.94
mW/°C
All
60
mA
VR
All
6
V
IF(pk)
All
3.0
A
PD
All
120
mW
1.41
mW/°C
PD
All
V45 Allowed Range
VO
V65 Allowed Range
Derate Above 25°C
EMITTER
Forward Current - Peak (1 µs pulse, 300 pps)
LED Power Dissipation 25°C Ambient
Derate Linearly From 25°C
DETECTOR
Detector Power Dissipation @ 25°C
Derate Linearly from 25°C
150
mW
2.0
mW/°C
All
0 to 16
V
VCC
All
3 to 16
V
IO
All
50
mA
I4 Output Current
ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.)
INDIVIDUAL COMPONENT CHARACTERISTICS
Parameters
Test Conditions
Symbol
Device
VF
All
Min
Typ
Max
1.2
1.5
Units
EMITTER
Input Forward Voltage
IF = 10 mA
IF = 0.3 mA
0.75
1.0
V
Reverse Current
VR = 3 V
IR
All
10
µA
Capacitance
V = 0, f = 1.0 MHz
CJ
All
100
pF
VCC
All
15
V
ICC(off)
All
5.0
mA
IOH
All
100
µA
DETECTOR
Operating Voltage Range
Supply Current
IF = 0, VCC = 5V
Output Current, High
IF = 0, VCC = VO = 15V
© 2003 Fairchild Semiconductor Corporation
Page 2 of 9
3
1.6
3/24/03
6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
H11L3M
ISOLATION CHARACTERISTICS
Parameters
Test Conditions
Symbol
Min
7500
Input-Output Isolation Voltage
t =1 sec.
VISO
Isolation Capacitance
VI-O = 0V, f = 1 MHz
CISO
Isolation Resistance
VI-O = ±500 VDC
Typ
Max
Units
VPEAK
0.4
0.6
pF
Ω
1011
RISO
TRANSFER CHARACTERISTICS
DC Characteristics
Test Conditions
Supply Current
IF = 10mA, VCC = 5V
Output Voltage, low
RL=270Ω,VCC=5V, IF=IF(on) max.
Turn-On Threshold Current
RL=270Ω, VCC = 5V
Symbol
Device
ICC(on)
VOL
IF(on)*
Min
Typ
Max
Units
All
1.6
5.0
mA
All
0.2
0.4
V
H11L1M
1.6
H11L2M
10.0
H11L3M
5.0
Turn-Off Threshold Current
RL=270Ω, VCC = 5V
IF(off)
All
0.3
1.0
Hysteresis Ratio
RL=270Ω, VCC = 5V
IF(off)/IF(on)
All
0.50
0.75
0.90
Symbol
Device
Min
Typ
Max
AC Characteristics
Test Conditions
mA
mA
Units
SWITCHING SPEED
Turn-On time
Fall Time
Turn-Off Time
Rise time
RL=270Ω, VCC = 5V, IF=IF(on),
TA=25°C
RL=270Ω, VCC = 5V, IF=IF(on),
TA=25°C
1.0
ton
0.65
µs
4
0.1
tf
All
.05
µs
0.1
2.0
RL=270Ω, VCC = 5V, IF=IF(on),
TA=25°C
toff
RL=270Ω, VCC = 5V, IF=IF(on),
TA=25°C
tr
Data Rate
All
All
1.2
µs
4
0.1
All
0.07
µs
0.1
All
1.0
MHz
NOTE:
*Maximum IF(ON) is the maximum current required to trigger the output. For example, a 1.6mA maximum trigger current would
require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA.
© 2003 Fairchild Semiconductor Corporation
Page 3 of 9
3/24/03
6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
C
I6
H11L3M
VIN 5V
5V
IF
50%
0
1
RE
H11L1
6
RL
4
VIN
270Ω
VO
toff
ton
tr = tf = 0.01µS
Z = 50Ω
5
2
10%
VO
90%
tf
tr
Figure 1. Switching Test Circuit and Waveforms
TYPICAL PERFORMANCE CURVES
Figure 2. Transfer Characteristics
Figure 3. Threshold Current vs. Supply Voltage
VCC= 5V
RL = 270 Ω
TA = 25°C
V OH
5
O
V - OUTPUT VOLTAGE (V)
IF - THRESHOLD CURRENT (NORMALIZED)
6
4
I F(OFF)
I F(ON)
3
2
1
V OL
0
0
1
2
1.6
IF NORMALIZED TO :
IF(ON) AT VCC = 5V
1.4
TA = 25oC
1.2
TURN ON THRESHOLD
1.0
TURN OFF THRESHOLD
0.8
0.6
0.4
0
3
2
6
8
10
12
14
16
VCC - SUPPLY VOLTAGE (V)
IF - INPUT CURRENT (mA)
Figure 4. Threshold Current vs. Supply Temperature
Figure 5. Output Voltage, Low vs. Load Current
1.6
2
1.4
VOL - OUTPUT VOLTAGE, LOW (V)
IF(On) , IF(Off) - THRESHOLD CURRENT (NORMALIZED)
4
1.2
1.0
0.8
NORMALIZED TO :
VCC = 5V
TA = 25oC
0.6
0.4
0.2
-50
-25
0
25
50
75
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
IF = IF(ON)
VCC = 5V
100
RL = 270Ω
TA - TEMPERATURE ( oC)
0.1
1
10
100
IO - LOAD CURRENT (mA)
© 2003 Fairchild Semiconductor Corporation
Page 4 of 9
3/24/03
6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
H11L3M
TYPICAL PERFORMANCE CURVES
Figure 6. Supply Current vs. Supply Voltage
Figure 7. LED Forward Voltage vs. Forward Current
1.8
6
T A = 0 °C
IF = 5mA
1.7
25 °C
70 °C
VF - FORWARD VOLTAGE (V)
IC - SUPPLY CURRENT (mA)
5
4
3
2
TA = 0°C 25°C 70°C
1
IF = 0mA
1.6
1.5
1.4
TA = 55°C
1.3
TA = 25°C
1.2
TA = 100°C
0
0
2
4
6
8
10
12
14
16
1.1
VCC - SUPPLY VOLTAGE (V)
1.0
1
10
100
IF - LED FORWARD CURRENT (mA)
© 2003 Fairchild Semiconductor Corporation
Page 5 of 9
3/24/03
6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
Package Dimensions (Through Hole)
H11L3M
Package Dimensions (Surface Mount)
0.350 (8.89)
0.320 (8.13)
0.350 (8.89)
0.320 (8.13)
0.260 (6.60)
0.240 (6.10)
0.070 (1.77)
0.040 (1.02)
0.260 (6.60)
0.240 (6.10)
0.390 (9.90)
0.332 (8.43)
0.070 (1.77)
0.040 (1.02)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.200 (5.08)
0.115 (2.93)
0.200 (5.08)
0.115 (2.93)
0.100 (2.54)
0.015 (0.38)
0.012 (0.30)
0.008 (0.20)
0.025 (0.63)
0.020 (0.51)
0.020 (0.50)
0.016 (0.41)
0.100 (2.54)
0.100 [2.54]
15°
0.035 (0.88)
0.006 (0.16)
0.020 (0.50)
0.016 (0.41)
0.012 (0.30)
Package Dimensions (0.4” Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
0.350 (8.89)
0.320 (8.13)
0.070 (1.78)
0.260 (6.60)
0.240 (6.10)
0.060 (1.52)
0.070 (1.77)
0.040 (1.02)
0.014 (0.36)
0.010 (0.25)
0.425 (10.79)
0.100 (2.54)
0.305 (7.75)
0.200 (5.08)
0.115 (2.93)
0.030 (0.76)
0.100 (2.54)
0.015 (0.38)
0.020 (0.50)
0.016 (0.41)
0.100 [2.54]
0.012 (0.30)
0.008 (0.21)
0.425 (10.80)
0.400 (10.16)
NOTE
All dimensions are in inches (millimeters)
© 2003 Fairchild Semiconductor Corporation
Page 6 of 9
3/24/03
6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
H11L3M
ORDERING INFORMATION
Option/Order Entry Identifier
Description
S
Surface Mount Lead Bend
SR2
Surface Mount; Tape and reel
T
0.4" Lead Spacing
V
VDE 0884
TV
VDE 0884, 0.4" Lead Spacing
SV
VDE 0884, Surface Mount
SR2V
VDE 0884, Surface Mount, Tape & Reel
MARKING INFORMATION
1
V
3
H11L1
2
X YY Q
6
5
4
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One digit year code, e.g., ‘3’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
*Note – ‘V’ option parts marked with date code ‘325’ or earlier are marked in portrait format.
© 2003 Fairchild Semiconductor Corporation
Page 7 of 9
3/24/03
6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
H11L3M
Carrier Tape Specifications
12.0 ± 0.1
4.5 ± 0.20
2.0 ± 0.05
4.0 ± 0.1
0.30 ± 0.05
Ø1.5 MIN
1.75 ± 0.10
11.5 ± 1.0
21.0 ± 0.1
9.1 ± 0.20
10.1 ± 0.20
0.1 MAX
24.0 ± 0.3
Ø1.5 ± 0.1/-0
User Direction of Feed
NOTE
All dimensions are in inches (millimeters)
Reflow Profile
Temperature (°C)
300
230°C, 10–30 s
250
245°C peak
200
150
Time above 183°C, 120–180 sec
100
Ramp up = 2–10°C/sec
50
• Peak reflow temperature: 245°C (package surface temperature)
• Time of temperature higher than 183°C for 120–180 seconds
• One time soldering reflow is recommended
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
© 2003 Fairchild Semiconductor Corporation
Page 8 of 9
3/24/03
6-PIN DIP
OPTOISOLATORS LOGIC OUTPUT
H11L1M
H11L2M
H11L3M
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
© 2003 Fairchild Semiconductor Corporation
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
Page 9 of 9
3/24/03
Similar pages