MORNSUN H2405RN-2W Single output dc-dc converter Datasheet

H_RN-2W Series
2W, FIXED INPUT, ISOLATED & UNREGULATED
SINGLE OUTPUT DC-DC CONVERTER
multi-country patent protection RoHS
FEATURES
High Efficiency up to 80%
DIP Package
6KVDC Isolation
Temperature Range: -40°C to +85°C
Internal SMD Construction
No Heat sink Required
No External Component Required
Continuous short circuit protection
Industry Standard Pinout
RoHS Compliance
PRODUCT PROGRAM
Input
Part
Number
Voltage (VDC)
Output
Range
5
400
40
76
5
4.5-5.5
12
167
17
79
H0505RN-2W
H0512RN-2W*
Max
Min
H0515RN-2W
15
133
13
78
H1205RN-2W*
5
400
40
76
12
167
17
80
15
133
13
79
H1212RN-2W*
12
10.8-13.2
H1215RN-2W
H2412RN-2W*
24
21.6-26.4
H2415RN-2W*
The H_RN-2W Series are specially designed for
Efficiency
(%, Typ)
Nominal
H2405RN-2W*
APPLICATIONS
Current (mA)
Voltage
(VDC)
5
400
40
77
12
167
17
80
15
133
13
78
*Designing.
applications where a group of polar power supplies
are isolated from the input power supply in a
OUTPUT SPECIFICATIONS
distributed power supply system on a circuit board.
Item
These products apply to:
1) Where the voltage of the input power supply is
fixed (voltage variation ≤ ±10%);
Line regulation
2) Where isolation is necessary between input and
output (isolation voltage ≤6000VDC);
Load regulation
3) Where the regulation of the output voltage and
the output ripple noise are not demanding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power device
driving circuits.
Test Conditions
Min
Output power
Max
Units
2
W
±1.2
For Vin change of 1%
10% to 100% load (5V output)
12.8
15
10% to 100% load (12V output)
6.8
15
10% to 100% load (15V output)
6.3
15
Output voltage accuracy
Temperature drift
Typ
0.2
%
See tolerance envelope graph
100% full load
Ripple & Noise*
20MHz Bandwidth
150
Switching frequency
Full load, nominal input
50
0.03
%/°C
200
mVp-p
KHz
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power
Converter. Section, application notes.
MODEL SELECTION
H0505RN-2W
COMMON SPECIFICATION
R ated Pow er
Package Styl e
Output Vol tage
Input Vol tage
Product Ser ies
Item
Test Conditions
Min
Units
95
%
-40
85
Storage temperature
-55
125
Lead temperature
MORNSUN Science& Technology co.,Ltd.
Max
Operating temperature
Temp. rise at full load
Address: 2th floor 6th building, Hangzhou Industrial
District, Guangzhou, China
Tel: 86-20-38601850
Fax: 86-20-38601272
http://www.mornsun-power.com
Typ
Storage humidity
15
1.5mm from case for 10 seconds
°C
25
300
Cooling
Free air convection
Case material
Plastic(UL94-V0)
Short circuit protection
MTBF
Weight
The copyright and authority for the interpretation of the products are reserved by Mornsun
Continuous, automatic recovery
3500
K hours
3.8
g
Specifications subject to change without notice.
H_RN-2W
A/0-2009
Page 1 of 2
ISOLATION CHARACTERISTICS
Item
Test Conditions
Min
Isolation voltage
Tested for 1 minute and 1mA max
6000
VDC
Isolation resistance
Test at 500VDC
1000
MΩ
Isolation capacitance
Typ
Max
10
Units
Recommended testing and application circuit
If you want to further decrease the input/output
ripple, an “LC” filtering network may be connected to
the input and output ends of the DC/DC converter,
see (Figure 1).
pF
L
L
+Vo
Vin
DC DC
Cin
TYPICAL CHARACTERISTICS
Cout
G ND
0V
(Figure 1)
It should also be noted that the inductance and the
frequency of the “LC” filtering network should be
staggered with the DC/DC frequency to avoid mutual
interference. However, the capacitance of the output
filter capacitor must be proper. If the capacitance is
too big, a startup problem might arise. For every
channel of output, provided the safe and reliable
operation is ensured, the recommended capacitance
o
Operating Temp.( C)
of its filter capacitor sees (Table 1).
EXTERNAL CAPACITOR TABLE (Table 1)
OUTLINE DIMENSIONS & PIN CONNECTIONS
First Angle Projection
(Side View)
Cin
(uF)
4.7
Single Vout
(VDC)
5
Cout
(uF)
10
12
2.2
12
2.2
24
1
15
1
It’s not recommend to connect any external capacitor in the
application field with less than 0.5 watt output.
3.00
(0.118)
7.50
(0.295)
8.00
(0.315)
23.86 (0.940)
Vin
(VDC)
5
RECOMMENDED FOOTPRINT
Top view,grid:2.54mm(0.1inch)
diameter:1.00mm(0.039inch)
2.54
(0.100)
Output Voltage Regulation and Over-voltage
Protection Circuit
The simplest device for output voltage regulation,
over-voltage and over-current protection is a linear
13.70
(0.540)
15.24 (0.600)
voltage regulator with overheat protection that is
16
10 9
16
10 9
7 8
1
connected to the input or output end in series (Figure
2).
(Top View)
1
7 8
15.24 (0.600)
Vin
+Vout
REG
DC DC
GND
0V
15.24(0.600)
13.70(0.540)
Note:
Unit:mm(inch)
Pin section:0.60*0.25mm(0.024*0.010inch)
Pin tolerances: 0.10mm( 0.004inch)
General tolerances: 0.25mm( 0.010inch)
FOOTPRINT DETAILS
Pin
Function
1
GND
7
NC
8
NC
+Vo
9
10
-Vo
16
Vin
NC:No Connection
REG
Vin
GND
+Vout
DC DC
0V
(Figure 2)
Overload Protection
Under normal operating conditions, the output
circuit of these products has no protection against
overload. The simplest method is to connect a
self-recovery fuse in series at the input end or add a
circuit breaker to the circuit.
APPLICATION NOTE
Requirement On Output Load
To ensure this module can operate efficiently and reliably, a minimum load is
specified for this kind of DC/DC converter in addition to a maximum load (nam ely full
load). During operation, make sure the specified range of input voltage is not
exceeded, the minimum output load is not less than 10% of the full load, and that this
product should never be operated under no load! If the actual output power is very
small, please connect a resistor with proper resistance at the output end in parallel to
No parallel connection or plug and play.
Note:
1. All specifications measured at Ta=25°C, humidity<75%,
nominal input voltage and rated output load unless
otherwise specified.
2. Only typical models listed, other models may be different,
please contact our technical person for more details.
3. Operation under minimum load will not damage the
converter; However, they may not meet all specification
listed.
increase the load, or use our company’s products with a lower rated output power.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
H_RN-2W
A/0-2009
Page 2 of 2
Similar pages