Coilcraft H7019-AL Common mode line choke Datasheet

Document 142-1
Common Mode Line Chokes
High Inductance
Series
These common mode line chokes provide the best
available combination of low cost and high inductance.
Coilcraft EE style common mode line chokes are available in two series, each with a variety of current ratings,
sizes and inductance values. The Coilcraft bobbin design provides a creepage and clearance spacer that
makes these parts compatible with UL, VDE, and IEC
specifications.
• VDE, IEC, CSA compatible
• Cost effective design
• 3750 Vrms isolation between windings
For free evaluation samples, contact Coilcraft or visit
www.coilcraft.com.
F55XX Series
0.600 ±0.010
15,24 ±0,25
2
1.2
max
30,5
5
1.35
max
34,29
0.875 ±0.015
22,23 ±0,38
2
5
11
8
2
5
11
8
+0.002
0.031 –0.001
dia
0,79 +0,0508
–0,0254
0.150 ±0.03
3,81 ±0,76
Terminations:
11
8
1.45
max
36,8
Tin-silver over tin over copper
H70XX Series
0.900 ±0.010
22,86 ±0,25
2
1.3
max
33,0
0.150 ±0.03
3,81 ±0,76
Terminations:
5
1.65
max
41,9
0.053 ±0.002
1,35 ±0,05 dia
1.00 ±0.015
25,4 ±0,38
11
8
1.80
max
45,7
Tin-silver over tin over copper
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2006
Document 142-1
Revised 02/14/06
Document 142-2
Common Mode Line Chokes–High Inductance Series
F55XX Series
Part
number
Inductance1
(mH)
F5585-AL
F5586-AL
F5587-AL
F5588-AL
F5589-AL
F5590-AL
F5591-AL
F5592-AL
F5593-AL
82.0
34.0
25.3
15.8
8.20
6.55
3.45
1.75
1.20
Current
(Amps)
SRF2
(kHz)
DCR3
(Ohms)
65
100
129
170
206
230
309
420
560
3.10
1.30
0.855
0.540
0.295
0.215
0.120
0.070
0.045
SRF2
(kHz)
DCR3
(Ohms)
62
96
104
128
190
220
275
370
556
640
1.10
0.720
0.465
0.350
0.160
0.115
0.080
0.045
0.025
0.017
¹/4
³/4
1
1¹/4
1¹/2
2
2¹/2
3
4
1. Inductance is minimum per winding, tested at 0.1 Vrms, 20 kHz.
2. SRF is minimum for each winding.
3. DCR is maximum per winding.
4. Operating temperature range –40°C to +85°C.
5. Electrical specifications at 25°C.
H70XX Series
Part
number
H7010-AL
H7011-AL
H7012-AL
H7013-AL
H7014-AL
H7015-AL
H7016-AL
H7017-AL
H7018-AL
H7019-AL
Inductance1
(mH)
56.5
34.8
23.6
19.8
7.38
5.36
4.10
2.09
0.966
0.753
Current
(Amps)
1
1¹/4
1¹/2
2
2¹/2
3
4
5
6
8
1. Inductance is minimum per winding, tested at 0.1 Vrms, 20 kHz.
2. SRF is minimum for each winding.
3. DCR is maximum per winding.
4. Operating temperature range –40°C to +85°C.
5. Electrical specifications at 25°C.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2006
Document 142-2
Revised 08/02/06
Similar pages