Power-One HBS050YH-A Hbs series - 50 watt Datasheet

(888) IPD-CONVerters ● (888) 473-2668
●
www.ipdconverters.com
HBS SERIES - 50 WATT
DESCRIPTION
FEATURES
HBS DC/DC converters provide up to 50 Watts of
• Industry Standard Halfoutput power in an industry standard half-brick footprint.
Brick
The HBS units feature excellent efficiency, Class A
• Open-Frame Packaging
conducted noise specs, and fixed switching frequency.
The HBS, using open-frame packaging, along with planar • 100°C Baseplate
Operation
magnetics provides maximum useable power with
minimal thermal constraints. The HBS series is
especially suited to telecom, networking, and industrial
applications.
•
•
•
•
Water Washable
“True-Trim” Option
1500V Isolation
Positive Or Negative
Logic
Efficiency vs. Load (24V Input)
95
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
18 - 36 VDC
34 - 75 VDC
25 mA
Shunt Diode
EFFICIENCY %
90
75
HBS050YG-A
HBS050YH-A
HBS050YJ-A
65
60
10
30
40
50
60
70
80
90
100
90
100
Efficiency vs. Load (48V Input)
95
90
EFFICIENCY %
±1%
±0.2% Vout
±0.2% V out
0.5 VDC
10%, Iout Rated
25% Iout
4% Vout
500 µs
±10%
Hiccup
110 - 140%
115 - 140% Vout Nom.
Hiccup
20
LOAD %
85
80
HBS050ZG-A
75
HBS050ZH-A
HBS050Z10.5-A
70
65
General
Turn-On Time
Remote Shutdown
Remote Shutdown Reference
Switching Frequency
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Weight (approx.)
80
70
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Remote Sense Headroom
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Short Circuit / Overcurrent Protection
Current Limit Threshold Range, % of Iout Rated
OVP Trip Range
OVP
85
60
10 ms
Positive or Negative Logic
Vin Negative
500 kHz
1500 VDC
1050 VDC
500 VDC
0.2%/°C
-40 to +100°C
-40 to +125°C
105 to 115°C
5 g, 10 - 55 Hz
2.1 x 106 hrs
UL, CUL
2.5 oz
1
10
20
30
40
50
60
70
80
LOAD %
Notes
†
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
HBS SERIES - 50 WATT
MODELS - (See the last page of this file for options.)
Vin
(Volts)
Vin Range
(Volts)
Iin Max.*
(Amps)
Vout
(Volts)
Iout Rated
(Amps)
Ripple & Noise
Pk-Pk (mV)
Efficiency
Typ. **
Model
24
24
24
24
24
48
48
48
48
48
18 - 36
18 - 36
18 - 36
18 - 36
18 - 36
34 - 75
34 - 75
34 - 75
34 - 75
34 - 75
3.50
2.30
3.60
3.50
3.50
1.32
1.22
1.80
1.75
1.75
3.30
3.30
5.00
12.00
15.00
3.30
3.30
5.00
12.00
15.00
15.00
10.00
10.00
4.20
3.30
15.00
10.00
10.00
4.20
3.30
100
100
100
150
150
100
100
100
150
150
80%
80%
84%
85%
86%
80%
80%
82%
85%
87%
HBS050YE-A
HBS033YE-A
HBS050YG-A
HBS050YH-A
HBS050YJ-A
HBS050ZE-A
HBS033ZE-A †
HBS050ZG-A
HBS050ZH-A
HBS050ZJ-A †
† Denotes advanced product release. Consult factory for product availability.
* Maximum input current at minimum input voltage, maximum rated output power.
** At nominal Vin, rated output.
MECHANICAL DRAWING
0.18"
2.28"
(57.9mm)
1
5
1.400"(35.6mm)
2
6
1.000"(25.4mm)
7
0.700"(17.8mm)
3
8
0.400"(10.2mm)
4
9
DIA 0.080"
(2.0mm)
(61.0mm)
HBS
2PL
BOTTOM VIEW
2.40"
(4.6mm)
MOUNTING INSERTS
M3X.5 THROUGH 4PL
DIA 0.040"
(1.0mm)
7PL
0
-0.50"(-12.7mm)
0.025" REF.
0
1.900"
(0.6mm)
(48.3mm)
0.50"
(12.7mm)
-0.19"
(-4.8mm)
Thermal Impedance
Natural Convection
100 LFM
200 LFM
300 LFM
400 LFM
6.6
5.7
4.2
3.1
2.6
°C/W
°C/W
°C/W
°C/W
°C/W
Note:
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated for
specific application.
Pin
Function
1
2
3
4
5
6
7
8
9
-Vin
Case
On/Off
+Vin
-V out
-Sense
Trim
+Sense
+V out
2
Tolerances
Inches:
.XX ± 0.020
.XXX ± 0.010
(Millimeters)
.X ± 0.5
.XX ± 0.25
Pin:
± 0.002
± 0.05
( Dimensions as listed unless otherwise
specified.)
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that
you prefer and add them to the model number. Example ordering options are located below the
options table.
OPTION
SUFFIX
APPLICABLE SERIES
Negative Logic
N
HAS, HBD, HBS, HES, LES, QBS,
QES, TES, TQD
Lucent Compatible Trim
T
HAS, HBD, HBS, HES, QBS, QES
Terminal Strip
TS
REMARKS
TTL “Low” Turns Module ON
TTL “High” Turns Module OFF
XWS, XWD, XWT
Trim
1
IAS, LES
Enable
2
IAD, IAS, LES, SMS
Trim and Enable
3
IAS, LES
Current Share
4
SMS
Headerless
Y
Encapsulated EWS, IWS, OWS
PIN LENGTH AND HEATSINK
OPTIONS
Standard Pin Length is 0.180”
(4.6mm)
0.110” (2.8mm) Pin Length
8
All Units (Except SMS)
0.150” (3.8mm) Pin Length
9
All Units (Except SMS)
0.24” (6.1mm) Horizontal Heatsink
1H
All Units (Except DIP, SIP, and SM
Packages)
Includes Thermal Pad
0.24” (6.1mm) Vertical Heatsink
1V
All Units (Except DIP, SIP, and SM
Packages)
Includes Thermal Pad
0.45” (11.4mm) Horizontal
Heatsink
2H
All Units (Except DIP, SIP, and SM
Packages)
Includes Thermal Pad
0.45” (11.4mm) Vertical Heatsink
2V
All Units (Except DIP, SIP, and SM
Packages)
Includes Thermal Pad
0.95” (24.1mm) Horizontal
Heatsink
3H
All Units (Except DIP, SIP, and SM
Packages)
Includes Thermal Pad
0.95” (24.1mm) Vertical Heatsink
3V
All Units (Except DIP, SIP, and SM
Packages)
Includes Thermal Pad
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and
0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
3
Similar pages