SLS HC00 Quad 2-input nand gate Datasheet

SL74HC00
Quad 2-Input NAND Gate
High-Performance Silicon-Gate CMOS
The SL74HC00 is identical in pinout to the LS/ALS00. The device
inputs are compatible with standard CMOS outputs; with pullup
resistors, they are compatible with LS/ALSTTL outputs.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 µA
• High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION
SL74HC00N Plastic
SL74HC00D SOIC
TA = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
FUNCTION TABLE
Inputs
PIN 14 =VCC
PIN 7 = GND
SLS
System Logic
Semiconductor
Output
A
B
Y
L
L
H
L
H
H
H
L
H
H
H
L
SL74HC00
MAXIMUM RATINGS *
Symbol
Parameter
Value
Unit
-0.5 to +7.0
V
VCC
DC Supply Voltage (Referenced to GND)
VIN
DC Input Voltage (Referenced to GND)
-1.5 to VCC +1.5
V
DC Output Voltage (Referenced to GND)
-0.5 to VCC +0.5
V
DC Input Current, per Pin
±20
mA
DC Output Current, per Pin
±25
mA
ICC
DC Supply Current, VCC and GND Pins
±50
mA
PD
Power Dissipation in Still Air, Plastic DIP+
SOIC Package+
750
500
mW
-65 to +150
°C
260
°C
VOUT
IIN
IOUT
Tstg
TL
Storage Temperature
Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SOIC Package)
*
Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SOIC Package: : - 7 mW/°C from 65° to 125°C
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
VIN, VOUT
Parameter
DC Supply Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
TA
Operating Temperature, All Package Types
tr, t f
Input Rise and Fall Time (Figure 1)
VCC =2.0 V
VCC =4.5 V
VCC =6.0 V
Min
Max
Unit
2.0
6.0
V
0
VCC
V
-55
+125
°C
0
0
0
1000
500
400
ns
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range
GND≤(VIN or VOUT)≤VCC.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC).
Unused outputs must be left open.
SLS
System Logic
Semiconductor
SL74HC00
DC ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND)
VCC
Guaranteed Limit
Test Conditions
V
25 °C
to
-55°C
≤85
°C
≤125
°C
Unit
Minimum High-Level
Input Voltage
VOUT=0.1 V or VCC-0.1 V
IOUT≤ 20 µA
2.0
4.5
6.0
1.5
3.15
4.2
1.5
3.15
4.2
1.5
3.15
4.2
V
VIL
Maximum Low -Level
Input Voltage
VOUT= VCC-0.1 V
IOUT ≤ 20 µA
2.0
4.5
6.0
0.5
1.35
1.8
0.5
1.35
1.8
0.5
1.35
1.8
V
VOH
Minimum High-Level
Output Voltage
VIN=VIH or VIL
IOUT ≤ 20 µA
2.0
4.5
6.0
1.9
4.4
5.9
1.9
4.4
5.9
1.9
4.4
5.9
V
4.5
6.0
3.98
5.48
3.84
5.34
3.7
5.2
2.0
4.5
6.0
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
VIN=VIH
IOUT ≤ 4.0 mA
IOUT ≤ 5.2 mA
4.5
6.0
0.26
0.26
0.33
0.33
0.4
0.4
Symbol
Parameter
VIH
VIN=VIH or VIL
IOUT ≤ 4.0 mA
IOUT ≤ 5.2 mA
VOL
Maximum Low-Level
Output Voltage
VIN=VIH
IOUT ≤ 20 µA
V
IIN
Maximum Input
Leakage Current
VIN=VCC or GND
6.0
±0.1
±1.0
±1.0
µA
ICC
Maximum Quiescent
Supply Current
(per Package)
VIN=VCC or GND
IOUT=0µA
6.0
1.0
10
40
µA
SLS
System Logic
Semiconductor
SL74HC00
AC ELECTRICAL CHARACTERISTICS (CL=50pF,Input t r=t f=6.0 ns)
VCC
Symbol
Parameter
Guaranteed Limit
V
25 °C to
-55°C
≤85°C
≤125°C
Unit
tPLH, t PHL
Maximum Propagation Delay, Input A or B to
Output Y (Figures 1 and 2)
2.0
4.5
6.0
75
15
13
95
19
16
110
22
19
ns
tTLH, t THL
Maximum Output Transition Time, Any Output
(Figures 1 and 2)
2.0
4.5
6.0
75
15
13
95
19
16
110
22
19
ns
-
10
10
10
pF
CIN
Maximum Input Capacitance
Power Dissipation Capacitance (Per Gate)
CPD
Typical @25°C,VCC=5.0 V
Used to determine the no-load dynamic power
consumption:
PD=CPDVCC2f+ICCVCC
Figure 1. Switching Waveforms
22
pF
Figure 2. Test Circuit
EXPANDED LOGIC DIAGRAM
(1/4 of the Device)
SLS
System Logic
Semiconductor
Similar pages