HCC/HCF4032B HCC/HCF4038B TRIPLE SERIAL ADDERS . . .. . . .. .. INVERT INPUTS ON ALL ADDERS FOR SUM COMPLEMENTING APPLICATIONS FULLY STATIC OPERATION...DC TO 10MHz (typ.) @ VDD = 10V BUFFERED INPUTS AND OUTPUTS SINGLE-PHASE CLOCKING STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE 5V, 10V, AND 15V PARAMETRIC RATING INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD N° 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” EY (Plastic Package) M1 (Micro Package) F (Ceramic Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC40XXBF HCF40XXBM1 HCF40XXBEY HCF40XXBC1 PIN CONNECTIONS DESCRIPTION The HCC/4032B/4038B (extended temperature range) and HCF4032B/4038B (intermediate temperature range) are monolithic integrated circuits, available in 16-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4032B and HCC/HCF4038B types consist of three serial adder circuits with common CLOCK and CARRY-RESET inputs. Each adder has two provisions for two serial DATA INPUT signals and an INVERT command signal. When the command signal is a logical ”1”, the sum is complemented. Data words enter the adder with the least significant bit first ; the sign bit trails. The output is the MOD 2 sum of the input bits plus the carry from the previous bit position. The carry is only added at the positive-going clock transition for the HCC/HCF4032B or at the negative-going clock for the HCC/HCF4038B, thus, for spike-free operation the input data transitions should occur as soon as possible after the triggering edge. The CARRY is reset to a logical ”0” at the end of each word by applying a logical ”1” signal to a CARRY-RESET input one-bit-position before the application of the first bit of the next word. June 1989 1/11 HCC/HCF4032B/4038B FUNCTIONAL DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V DD* Parameter Supply Voltage : HC C Types H C F Types Vi Input Voltage II Value Unit – 0.5 to + 20 – 0.5 to + 18 V V – 0.5 to V DD + 0.5 V DC Input Current (any one input) ± 10 mA Pt ot Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range 200 mW 100 mW Top Operating Temperature : HCC Types H CF Types – 55 to + 125 – 40 to + 85 °C °C Tstg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top 2/11 Parameter Supply Voltage : H CC Types H C F Types Input Voltage Operating Temperature : HCC Types H CF Types Value Unit 3 to 18 3 to 15 V V 0 to V DD V – 55 to + 125 – 40 to + 85 °C °C HCC/HCF4032B/4038B LOGIC AND TIMING DIAGRAMS (one of three serial adders) 4032B WORD 1 WORD 2 0.0111100 = 0.0110010 = + 60 + 50 0.1101110 = + 110 WORD 3 WORD 4 1.1011011 = 1.1001110 = – 37 – 50 1.0101001 = – 87 3/11 HCC/HCF4032B/4038B LOGIC AND TIMING DIAGRAMS (continued) 4038B WORD 1 WORD 2 1.1000011 = 1.1001101 = – 61 – 51 1.0010000 = – 112 4/11 WORD 3 WORD 4 0.0100100 = 0.0110001 = + 36 + 49 0.1010101 = + 85 HCC/HCF4032B/4038B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL VOH VOL Parameter Quiescent Current VI (V) VO (V) VIL IOH CI Max. Min. Max. 150 HCC 0/10 Types 0/15 10 10 0.04 10 300 15 20 0.04 20 600 0/20 20 100 0.08 100 3000 0/ 5 HCF 0/10 Types 0/15 5 20 0.04 20 150 10 40 0.04 40 300 15 80 0.04 80 600 0/ 5 < 1 5 4.95 4.95 4.95 0/10 < 1 10 9.95 9.95 9.95 0/15 < 1 15 14.95 5/0 < 1 5 0.05 0.05 0.05 10/0 < 1 10 0.05 0.05 0.05 Input High Voltage Input Low Voltage Input Leakage Current Typ. 5 14.95 < 1 15 0.5/4.5 < 1 5 3.5 0.05 3.5 0.05 3.5 1/9 < 1 10 7 7 7 1.5/13.5 < 1 15 11 11 11 < 1 5 1.5 1.5 1.5 9/1 < 1 10 3 3 3 13.5/1.5 < 1 15 4 4 – 1.6 – 3.2 – 1.15 0/ 5 4.6 5 – 0.64 – 0.51 – 0.36 0/10 9.5 10 – 1.6 – 1.3 – 2.6 – 0.9 0/15 13.5 15 – 4.2 – 3.4 – 6.8 – 2.4 0/ 5 2.5 5 – 1.53 – – 3.2 1.36 – 1.1 0/ 5 4.6 5 – 0.52 – 0.44 – 0.36 0/10 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9 0/15 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4 0/ 5 0.4 5 0.64 0.51 1 0.36 HCC 0/10 Types 0/15 0.5 10 1.6 1.3 2.6 0.9 1.5 15 4.2 3.4 6.8 2.4 0/ 5 0.4 5 0.52 0.44 1 0.36 0.5 10 1.3 1.1 2.6 0.9 1.5 15 3.6 3.0 6.8 2.4 Input Capacitance – 1 – 1 18 ± 0.1 ±10–5 ± 0.1 15 ± 0.3 ±10 mA mA ± 1 Any Input Any Input V 4 – 2 HCF 0/15 Types V V 4.5/0.5 5 HCC 0/18 Types V 0.05 2.5 HCC Types µA 14.95 0/ 5 HCF 0/10 Types 0/15 IIH, IIL Max. Min. Unit T High* 0.04 Output Low Voltage Output Sink Cur rent Min. 2 5° C 5 HCF Types IOL TLow* 5 Output High Voltage Output Drive Current Value V DD (V) 0/ 5 15/0 VIH | I O| (µA) µA 5 –5 ± 0.3 7.5 ± 1 pF * TLo w = – 55°C for HCC device : – 40°C for HCF device. * THigh = + 125°C for HCC device : + 85°C for HCF device. The Noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5V min. with VDD = 15V. 5/11 HCC/HCF4032B/4038B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, C L = 50pF, R L = 200kΩ, all input rise and fall time = 20ns) Symbol Parameter t PHL , tP LH Propagation Delay Time A, B, or Inverter Inputs to Sum Outputs t PHL , tP LH Propagation Delay Time (clock input to sum outputs) Test Conditions Value V D D (V) Min. Typ. Max. 5 260 520 10 120 240 15 90 180 5 325 650 10 175 350 15 150 300 5 100 200 10 50 100 t T HL , t T HL Transition Time t h o ld Data Input Hold Time (clock edge to A, B, or reset inputs) Maximum Clock Input Frequency 5 f max t r, t f * Clock Input Rise or Fall Time 15 40 80 5 120 200 10 50 80 40 60 15 2.5 4.5 10 5 10 15 7.5 15 Unit ns ns ns MHz 5 500 10 500 15 500 µs * If more than one unit is cascaded tr should be made less than or equal to the sum of the transition time and the fixed propagation delay of the output of the driving state for the estimated capacitive load. Typical Output Low (sink) Current. 6/11 Minimum Output Low (sink) Current Characteristics. HCC/HCF4032B/4038B Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics. TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Current. 7/11 HCC/HCF4032B/4038B Plastic DIP16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 8/11 HCC/HCF4032B/4038B Ceramic DIP16/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7 0.276 D E 3.3 0.130 0.38 e3 0.015 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053D 9/11 HCC/HCF4032B/4038B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 10/11 HCC/HCF4032B/4038B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 11/11