AVAGO HCPL-817-56BE Phototransistor optocoupler high density mounting type Datasheet

HCPL-817
Phototransistor Optocoupler High Density Mounting Type
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The HCPL-817 contains a light emitting diode optically
coupled to a phototransistor. It is packaged in a 4-pin DIP
package and available in wide-lead spacing option and
lead bend SMD option. Input-output isolation voltage is
5000 Vrms. Response time, tr, is typically 4 μs and minimum
CTR is 50% at input current of 5 mA.
• Current Transfer Ratio
(CTR: min. 50% at IF = 5 mA, VCE = 5 V)
1
+
• UL approved
IC 4
IF
COLLECTOR
VF
CATHODE
3
–
2
Functional Diagram
PIN NO. AND INTERNAL
CONNECTION DIAGRAM
4
• Response time
(tr: typ., 4 μs at VCE = 2 V, IC = 2 mA, RL = 100 Ω)
• Compact dual-in-line package
Schematic
ANODE
• High input-output isolation voltage (Viso = 5000 Vrms)
3
EMITTER
• CSA approved
• IEC/EN/DIN EN 60747-5-2 approved
• Options available:
– Leads with 0.4" (10.16 mm) spacing (W00)
– Leads bends for surface mounting (300)
– Tape and reel for SMD (500)
– IEC/EN/DIN EN 60747-5-2 approvals (060)
Applications
• Signal transmission between circuits of different
potentials and impedances
• I/O interfaces for computers
• Feedback circuit in power supply
1
1. ANODE
2. CATHODE
2
3. EMITTER
4. COLLECTOR
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
HCPL-817-xxxx is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component
Acceptance Notice #5, File CA 88324.
RoHS Compliant Option
Part
number
HCPL817
Rank
‘0’
50%
<CTR<
600%
Rank
‘A’
80%
<CTR<
160%
Rank
‘B’
130%
<CTR<
260%
Rank
‘C’
200%
<CTR<
400%
Rank
‘D’
300%
<CTR<
600%
Rank
‘L’
50%
<CTR<
100% Package
-000E
-00AE
-00BE
-00CE
-00DE
-00LE
-300E
-30AE
-30BE
-30CE
-30DE
-30LE
-500E
-50AE
-50BE
-50CE
-50DE
-50LE
Surface
Mount
Gull
Wing
100 pcs
per tube
X
X
X
X
-06AE
-06BE
-06CE
-06DE
-06LE
-360E
-36AE
-36BE
-36CE
-36DE
-36LE
X
X
-560E
-56AE
-56BE
-56CE
-56DE
-56LE
X
X
-W00E
-W0AE
-W0BE
-W0CE
-W0DE
-W0LE
-W6AE
-W6BE
-W6CE
-W6DE
-W6LE
100 pcs
per tube
X
300mil
DIP-4
-060E
-W60E
Tape
& Reel
IEC/EN/
DIN EN
607475-2
Quantity
400mil
DIP-4
X
1000 pcs
per reel
X
100 pcs
per tube
X
100 pcs
per tube
X
1000 pcs
per reel
100 pcs
per tube
X
100 pcs
per tube
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-817-360E to order product of 300mil DIP-4 DC Gull Wing Surface Mount package in Tube packaging with
50%<CTR<600%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-817-50BE to order product of 300mil DIP-4 DC Gull Wing Surface Mount package in Tape and Reel packaging
with 130%<CTR<260% and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
2
Package Outline Drawings
HCPL-817-000E
7.62 ± 0.3
(0.3)
4.6 ± 0.5
(0.181)
3.5 ± 0.5
(0.138)
DATE CODE
A 817
LEAD FREE
Y WW
ANODE
6.5 ± 0.5
(0.256)
0.5 TYP.
(0.02)
3.3 ± 0.5
(0.130)
2.8 ± 0.5
(0.110)
RANK
0.26
(0.010)
0.5 ± 0.1
(0.02)
Dimensions in Millimeters and (Inches)
2.54 ± 0.25
(0.1)
7.62 ~ 9.98
4.6 ± 0.5
(0.181)
7.62 ± 0.3
(0.3)
HCPL-817-060E
3.5 ± 0.5
(0.138)
DATE CODE
LEAD FREE
A 817V
ANODE
Y WW
6.5 ± 0.5
(0.256)
0.5 TYP.
(0.02)
3.3 ± 0.5
(0.130)
2.8 ± 0.5
(0.110)
RANK
0.26
(0.010)
0.5 ± 0.1
(0.02)
Dimensions in Millimeters and (Inches)
2.54 ± 0.25
(0.1)
7.62 ~ 9.98
4.6 ± 0.5
(0.181)
7.62 ± 0.3
(0.3)
HCPL-817-W00E
3.5 ± 0.5
(0.138)
DATE CODE
LEAD FREE
ANODE
A 817
Y WW
6.5 ± 0.5
(0.256)
6.9 ± 0.5
(0.272)
2.3 ± 0.5
(0.09)
2.8 ± 0.5
(0.110)
RANK
Dimensions in Millimeters and (Inches)
3
0.5 ± 0.1
(0.02)
2.54 ± 0.25
(0.1)
0.26
(0.010)
10.16 ± 0.5
(0.4)
HCPL-817-300E
7.62 ± 0.3
(0.3)
4.6 ± 0.5
(0.181)
3.5 ± 0.5
(0.138)
DATE CODE
LEAD FREE
ANODE
A 817
0.26
(0.010)
6.5 ± 0.5
(0.256)
Y WW
1.2 ± 0.1
(0.047)
0.35 ± 0.25
(0.014)
10.16 ± 0.3
(0.4)
2.54 ± 0.25
(0.1)
RANK
1.0 ± 0.25
(0.039)
Dimensions in Millimeters and (Inches)
Solder Reflow Temperature Profile
30 seconds
260°C (Peak Temperature)
Temperature (°C)
250°C
217°C
200°C
1. One-time soldering reflow is recommended within the
condition of temperature and time profile shown.
150°C
2. When using another soldering method such as infrared
ray lamp, the temperature may rise partially in the mold
of thedevice. Keep the temperature on the package of
the device within the condition of (1) above.
60 sec
25°C
60 ~ 150 sec
90 sec
60 sec
Time (sec)
Note: Non-halide flux should be used.
Absolute Maximum Ratings (TA = 25°C)
Storage Temperature, TS
–55°C to +125°C
Operating Temperature, TA
–30°C to +100°C
Lead Solder Temperature, max.
(1.6 mm below seating plane)
260°C for 10 s
Average Forward Current, IF
50 mA
Reverse Input Voltage, VR
6V
Input Power Dissipation, PI
70 mW
Collector Current, IC
50 mA
Collector-Emitter Voltage, VCEO
70 V
Emitter-Collector Voltage, VECO
6V
Collector Power Dissipation
150 mW
Total Power Dissipation
200 mW
Isolation Voltage, Viso (AC for 1 minute, R.H. = 40 ~ 60%)
5000 Vrms
4
Electrical Specifications (TA = 25°C)
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
Forward Voltage
VF
–
1.2
1.4
V
IF = 20 mA
Reverse Current
IR
–
–
10
μA
VR = 4 V
Terminal Capacitance
Ct
–
30
250
pF
V = 0, f = 1 KHz
Collector Dark Current
ICEO
–
–
100
nA
VCE = 20 V
Collector-Emitter Breakdown Voltage
BVCEO
70
–
–
V
IC = 0.1 mA
Emitter-Collector Breakdown Voltage
BVECO
6
–
–
V
IE = 10 μA
Collector Current
IC
2.5
–
30
mA
*Current Transfer Ratio
CTR
50
–
600
%
IF = 5 mA, VCE = 5 V,
RBE = ∞
Collector-Emitter Saturation Voltage
VCE(sat)
–
0.1
0.2
V
IF = 20 mA, IC = 1 mA
Response Time (Rise)
tr
–
4
18
μs
Response Time (Fall)
tf
–
3
18
μs
VCE = 2 V, IC = 2 mA
RL = 100 Ω
Cut-off Frequency
fc
–
80
–
KHz
VCC = 5 V, IC = 2 mA
RL = 100 Ω, –3 dB
Isolation Resistance
Riso
5 x 1010
1 x 1011
–
Ω
DC 500 V
40 ~ 60% R.H.
Floating Capacitance
Cf
–
0.6
1.0
pF
V = 0, f = 1 MHz
* CTR =
IC
x 100%
IF
PC – COLLECTOR POWER DISSIPATION – mW
IF – FORWARD CURRENT – mA
60
50
40
30
20
10
0
-30
0
25
50
75
TA – AMBIENT TEMPERATURE – °C
100
125
Figure 1. Forward current vs. temperature.
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
TA = 25°C
IC = 0.5 mA
IC = 1 mA
4
IC = 3 mA
3
IC = 5 mA
IC = 7 mA
2
1
0
0
5
10
IF – FORWARD CURRENT – mA
Figure 3. Collector-emitter saturation voltage vs. forward current.
5
150
100
50
0
-30
0
25
50
75
100
TA – AMBIENT TEMPERATURE – °C
Figure 2. Collector power dissipation vs. temperature.
6
5
200
15
125
TA = 75°C
TA = 50°C
TA = 25°C
200
100
CTR – CURRENT TRANSFER RATIO – %
IF – FORWARD CURRENT – mA
500
TA = 0°C
TA = -25°C
50
20
10
5
2
1
2.0
1.5
1.0
VF – FORWARD VOLTAGE – V
0.5
0
3.0
2.5
Figure 4. Forward current vs. forward voltage.
RELATIVE CURRENT TRANSFER RATIO – %
IC – COLLECTOR CURRENT – mA
TA = 25°C
PC (MAX.)
IF = 30 mA
IF = 25 mA
30
IF = 20 mA
IF = 15 mA
20
IF = 10 mA
10
0
0
1
IF = 5 mA
2
3
4
5
6
7
VCE – COLLECTOR-EMITTER VOLTAGE – V
8
9
Figure 6. Collector current vs. collector-emitter voltage.
0.14
ICEO – COLLECTOR DARK CURRENT – A
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
2
5
10
20
IF – FORWARD CURRENT – mA
50
150
IF = 5 mA
VCE = 5 V
100
50
0
-30
0
25
50
75
TA – AMBIENT TEMPERATURE – °C
100
10-5
IF = 20 mA
IC = 1 mA
0.12
0.10
0.08
0.06
0.04
0.02
0
25
50
75
TA – AMBIENT TEMPERATURE – °C
Figure 8. Collector-emitter saturation voltage vs. temperature.
6
1
Figure 7. Relative current transfer ratio vs. temperature.
0.16
0
-25
VCE = 5 V
TA = 25°C
Figure 5. Current transfer ratio vs. forward current.
50
40
200
180
160
140
120
100
80
60
40
20
0
100
VCE = 20 V
10-6
10-7
10-8
10-9
10-10
10-11
-25
0
25
50
75
TA – AMBIENT TEMPERATURE – °C
Figure 9. Collector dark current vs. temperature.
100
200
100
50
20
10
5
2
1
0.5
0.2
0.1
VCE = 2 V
IC = 2 mA
TA = 25°C
VCE = 2 V
IC = 2 mA
TA = 25°C
0
VOLTAGE GAIN AV – dB
RESPONSE TIME – μs
500
tr
tf
td
ts
RL = 10 kΩ
-10
RL = 1 kΩ
RL = 100 Ω
-20
0.05
0.1
0.2
0.5
1
2
RL – LOAD RESISTANCE – kW
5
0.5
10
1
2
5 10 20
50 100
f – FREQUENCY – kHz
Figure 10. Response time vs. load resistance.
Figure 11. Frequency response.
Test Circuit for Response Time
Test Circuit for Frequency Response
VCC
VCC
RL
RD
RD
INPUT
OUTPUT
OUTPUT
~
INPUT
10%
OUTPUT
90%
td
ts
tr
tf
For product information and a complete list of distributors, please go to our web site:
RL
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved. Obsoletes AV01-0534EN
AV02-0265N - November 5, 2009
200
500
Similar pages