AVAGO HCPL-T250-300E 1.5 amp output current igbt gate drive optocoupler Datasheet

HCPL-T250
1.5 Amp Output Current IGBT Gate Drive Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The HCPL-T250 contains GaAs LED. The LED is optically
coupled to an integrated circuit with a power output stage.
This optocoupler is ideally suited for driving power IGBTs
and MOSFETs used in motor control inverter applications.
The high operating voltage range of the output stage
provides the drive voltages required by gate controlled
devices. The voltage and current supplied by this optocou‑
pler makes it ideally suited for directly driving IGBTs with
ratings up to 1200 V/25 A. For IGBTs with higher ratings,
the HCPL-T250 can be used to drive a discrete power stage
which drives the IGBT gate.
•
•
•
•
•
•
•
•
•
8
VCC
Input threshold current (IFLH): 5 mA (max.)
Supply current (ICC): 11 mA (max.)
Supply voltage (VCC): 15‑35 V
Output current (IO): ±0.5 A (min.)
Switching time (tPLH/tPHL): 0.5 µs (max.)
Isolation voltage (VISO): 3750 Vrms (min.)
UL 1577 recognized: File No. E55361
CSA approved
IEC/EN/DIN EN 60747-5-2 approved with VIORM = 630
Vpeak
• 5 kV/µs Minimum Common Mode Rejection (CMR) at
Vcm = 1500 V
• Creepage distance: 7.4 mm Clearance: 7.1 mm
7
VO
Applications
6
VO
5
VEE
Functional Diagram
N/C
1
ANODE
2
CATHODE
3
N/C
4
Q1
Q2
SHIELD
•
•
•
•
IGBT/MOSFET gate drive
AC/brushless DC motor drives
Industrial inverters
Switch mode power supplies
Truth Table
LED
Vout
ON
HIGH
OFF
LOW
A 0.1 µF bypass capacitor must be connected between pins 5 and 8.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
HCPL-T250 is UL Recognized with 3750 Vrms for 1 minute per UL1577.
Option
Part
Number
RoHS
Compliant
-000E
Non RoHS
Compliant
Package
Surface
Mount
Gull
Wing
Tape
& Reel
IEC/EN/DIN
EN 60747-5-2 Quantity
No option
X
X
50 per tube
-300E
#300
-500E
HCPL-T250
-060E
#500
X
X
X
300 mil
DIP-8
#060
X
1000 per reel
-360E
#360
X
X
X
50 per tube
-560E
#560
X
X
X
1000 per reel
X
50 per tube
50 per tube
To order, choose a part number from the part number column and combine with the desired option from the op‑
tion column to form an order entry.
Example 1:
HCPL-T250-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging
with IEC/EN/DIN EN 60747-5-2 Safety Approval in RoHS compliant.
Example 2:
HCPL-T250 to order product of 300 mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE’.
Package Outline Drawings
Standard DIP Package
9.65 ± 0.25
(0.380 ± 0.010)
8
7
7.62 ± 0.25
(0.300 ± 0.010)
6
5
6.35 ± 0.25
(0.250 ± 0.010)
A T250
DATE CODE
YYWW
PIN ONE
1
2
3
4
1.78 (0.070) MAX.
1.19 (0.047) MAX.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
+ 0.076
- 0.051
+ 0.003)
(0.010
- 0.002)
0.254
5° TYP.
PIN ONE
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
DIMENSIONS IN MILLIMETERS AND (INCHES).
2.54 ± 0.25
(0.100 ± 0.010)
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
Gull Wing Surface Mount Option 300
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
1.016 (0.040)
5
6.350 ± 0.25
(0.250 ± 0.010)
1
2
3
10.9 (0.430)
4
1.27 (0.050)
1.19
(0.047)
MAX.
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
3.56 ± 0.13
(0.140 ± 0.005)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.25
(0.025 ± 0.010)
0.635 ± 0.130
2.54
(0.025 ± 0.005)
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
2.0 (0.080)
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
12° NOM.
Solder Reflow Thermal Profile
300
TEMPERATURE (°C)
PREHEATING RATE 3°C + 1°C/–0.5°C/SEC.
REFLOW HEATING RATE 2.5°C ± 0.5°C/SEC.
200
PEAK
TEMP.
245°C
PEAK
TEMP.
240°C
2.5°C ± 0.5°C/SEC.
30
SEC.
160°C
150°C
140°C
SOLDERING
TIME
200°C
30
SEC.
3°C + 1°C/–0.5°C
100
PREHEATING TIME
150°C, 90 + 30 SEC.
50 SEC.
TIGHT
TYPICAL
LOOSE
ROOM
TEMPERATURE
0
0
50
100
150
200
TIME (SECONDS)
Note: Non-halide flux should be used.
Recommended Pb-Free IR Profile
tp
Tp
TEMPERATURE
TL
Tsmax
260 +0/-5 °C
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
217 °C
RAMP-UP
3 °C/SEC. MAX.
150 - 200 °C
RAMP-DOWN
6 °C/SEC. MAX.
Tsmin
ts
PREHEAT
60 to 180 SEC.
25
tL
60 to 150 SEC.
t 25 °C to PEAK
TIME
NOTES:
THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200 °C, Tsmin = 150 °C
Note: Non-halide flux should be used.
PEAK
TEMP.
230°C
250
Regulatory Information
The HCPL-T250 has been approved by the following organizations:
UL
Recognized under UL 1577, Component Recognition
Program, File E55361.
CSA
Approved under CSA Component Acceptance Notice
#5, File CA 88324.
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01.
(Option 060 only)
Insulation and Safety Related
Parameter
Symbol
Value
Units Conditions
Minimum External Air Gap
L(101)
7.1
mm
Measured from input terminals to
(Clearance)
output terminals, shortest distance through
air.
Minimum External Tracking
L(102)
7.4
mm
Measured from input terminals to
(Creepage)
output terminals, shortest distance path
along body.
Minimum Internal Plastic Gap
0.08
mm
Insulation thickness between emitter
(Internal Clearance)
and detector; also known as distance
through insulation
Tracking Resistance
CTI
≥175
Volts DIN IEC 112/VDE 0303 Part 1
(Comparative Tracking Index)
Isolation Group
IIIa
Material Group (DIN VDE 0110, 1/89, Table 1)
Absolute Maximum Ratings (Compared with HCPL-3120)
HCPL-3120
HCPL-T250
Parameter
Symbol
Units
Min.
Max.
Min.
Max.
Operating Temperature
TA
°C- 40
100-20
85
“High” Peak Output Current
IOH(PEAK)
A
2.5
1.5
“High” Peak Output Current
IOL(PEAK)
A
2.5
1.5
Storage Temperature
TS
°C-55
125-55
125
Average Input Current
IF(AVG)
mA
25
20
Peak Transient Input Current
IF(TRAN)
A
1.0
1.0
(<1 µs Pulse Width, 300 pps)
Reverse Input Voltage
VR
V
5
5
Supply Voltage
(VCC - VEE)
V
0
35
0
35
Output Voltage
VO
V
0
VCC
0
VCC
Output Power Dissipation
PO
mW
250
250
Lead Solder Temperature 260°C for 10 sec., 1.6 mm below seating plane
Solder Reflow Temperature Profile See Package Outline Drawings section
Note
1
2
3
Notes:
1. Maximum pulse width = 10 µs, maximum duty cycle = 0.2%. See HCPL-3120 Applications section for additional details on limiting IOH(PEAK).
2. Derate linearly above 70°C free-air temperature at a rate of 0.3 mA/°C.
3. Derate lineraly above 70°C free-air temperature at a rate of 4.8 mW/°C.
Recommended Operating Conditions
Parameter
Power Supply Voltage
Input Current (ON)
Input Voltage (OFF)
Symbol
Min.
VCC - VEE
15
IF(ON)
7
VF(OFF)-3.6
Max.
30
16
0.8
Units
V
mA
V
DC Electrical Specifications (Compared with HCPL-3120)
Over recommended operating conditions (IF(ON) = 7 to 16 mA, VF(OFF) = -3.6 to 0.8 V, VCC = 15 to 30 V,
VEE = Ground) unless otherwise specified.
HCPL-3120
HCPL-T250 Test
Parameter
Symbol
Units
Min.
Typ.*
Max.
Min.
Typ.*
Max. Conditions
Input Forward
VF
V
1.2
1.5
1.8
1.6
1.8
IF = 10 mA
Voltage
Temperature
∆VF /∆TA
mV/°C-1.6-2.0
IF = 10 mA
Coefficient of
Forward Voltage
Input Reverse
IR
µA
10
10
VR = 5 V
Current
Input Capacitance
CIN
pF
60
60
250
VF = 0 V,
F = 1 MHz
High Level
IOH
A
0.5
1.5
0.5
1.5
VO = VCC - 4 V
Output Current
2.0
N.A.
VO = VCC - 15 V
Low Level
IOL
A
0.5
2.0
0.5
2.0
VO = VCC - 4 V
Output Current
2.0
N.A.
VO = VCC - 15 V
High Level
VOH
V
VCC - 4 VCC - 3
VCC - 4 VCC - 3
IO = -100 mA
Output Voltage
Low Level
VOL
V
VEE +0.1 VEE +0.5
VEE +0.8 VEE +2.5 IO = 100 mA
Output Voltage
High Level
ICCH
mA
2.0
5
7
11
Output Open
Supply CurrentntSupply Current IF = 7 to 16 mA
Low Level
ICCL
mA
2.0
5
7.5
11
Output Open
Supply Current
VF = -3.0 to
+0.8 V
Threshold Input
IFLH
mA
2.3
5
1.2
5
IO = 0 mA,
Current Low to
VO > 5 V
High
Threshold Input
VFHL
V
0.8
0.8
Voltage High
to Low
Supply Voltage
VCC
V
15
30
15
30
Capacitance
CI-0
pF
0.6
1.0
(Input-Output)
Resistance
RI-0
Ω
1012
1012
(Input-Output)
*All typical values at TA = 25°C and VCC - VEE = 3° V, unless otherwise noted.
Note
Switching Specifications (AC) (Compared with HCPL-3120)
Over recommended operating conditions (TA = -40 to 100°C, IF(ON) = 7 to 16 mA, VF(OFF) = -3.6 to 0.8 V,
VCC = 15 to 30 V, VEE = Ground) unless otherwise specified.
HCPL-3120 HCPL-T250
(-40°C ~ 100°C) (-20°C ~ 85°C) Test
Parameter
Symbol
Units
Min.
Typ.*
Max.
Min.
Typ.*
Max. Conditions
Propagation Delay
tPHL
µs
0.1
0.27
0.5
0.27
0.5
Time to High Output Level
Propagation Delay
Time to Low
Output Level
TPLH
µs
0.1
0.3
0.5
Output Rise Time
tR
µs
0.1
N.A.
Output Fall Time
tF
µs
0.1
N.A.
0.3
0.5
Rg = 10 Ω
Cg = 10 nF,
f = 10 kHz,
Duty Cycle = 50%
Pulse Width
Distortion
PWD
µs
0.3
N.A.
Propagation
Delay Difference
Between Any
Two Parts
(tPHL -
tPLH)
PDD
µs-0.35
0.35
N.A.
N.A.
Note
4
Output High
|CMH|
kV/µs
25
35
5
TA = 25°C
Level Common
VCC = 30 V
Mode Transient
HCPL
IF = 10 mA
Immunity-3120
VCM = 1500 V
HCPL
IF = 10 mA
-T250
VCM = 600 V
5
Output Low
|CML|
kV/µs
25
35
5
TA = 25°C
Level Common
VF = 0 V
Mode Transient
HCPL
Immunity-3120
VCM = 1500 V
HCPL
-T250
VCM = 600 V
5
*All typical values at TA = 25°C and VCC - VEE = 30 V, unless otherwise noted.
Notes:
4. The difference between tPHL and tPLH between any two HCPL-3120 parts under the same test condition.
5. Common mode transient immunity in the high state is the maximum tolerable dVCM/dt of the common mode pulse, VCM, to assure that the
output will remain in the high state (i.e., VO > 15.0 V).
6. Common mode transient immunity in a low state is the maximum tolerable dVCM/dt of the common mode pulse, VCM, to assure that the out‑
put will remain in a low state (i.e., VO < 1.0 V).
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes 5989-2144EN
AV02-0166EN - October 16, 2007
Similar pages