Fairchild HCPL2503 High speed transistor optocoupler Datasheet

Single-Channel: 6N135, 6N136, HCPL2503, HCPL4502
Dual-Channel: HCPL2530, HCPL2531
High Speed Transistor Optocouplers
Features
Description
■ High speed –1 MBit/s
The HCPL4502, HCPL2503, 6N135, 6N136, HCPL2530
and HCPL2531 optocouplers consist of an AlGaAs
LED optically coupled to a high speed photodetector
transistor.
■ Superior CMR – 10kV/µs
■ Dual-Channel HCPL2530/HCPL2531
■ Double working voltage – 480V RMS
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor.
■ CTR guaranteed 0–70°C
■ U.L. recognized (File # E90700)
Applications
An internal noise shield provides superior common
mode rejection of 10kV/µs. An improved package allows
superior insulation permitting a 480V working voltage
compared to industry standard of 220V.
■ Line receivers
■ Pulse transformer replacement
■ Output interface to CMOS-LSTTL-TTL
■ Wide bandwidth analog coupling
Schematics
N/C 1
Package Outlines
8 VCC
8 VCC
+ 1
8
V
F1
+ 2
V
7 VB
_
1
2
7 V01
3
6 V02
F
_
3
6 VO
_
8
8
V
F2
N/C 4
5 GND
6N135, 6N136, HCPL2503, HCPL4502
1
+ 4
5 GND
1
HCPL2530/HCPL2531
Pin 7 is not connected in
Part Number HCPL4502
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
August 2008
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Condition
Value
Units
TSTG
Storage Temperature
-55 to +125
°C
TOPR
Operating Temperature
-55 to +100
°C
TSOL
Lead Solder Temperature
260 for 10 sec
°C
IF (avg)
DC/Average Forward Input
Current Each Channel(1)
25
mA
IF (pk)
Peak Forward Input Current
Each Channel(2)
50% duty cycle, 1ms P.W.
50
mA
IF (trans)
Peak Transient Input Current
Each Channel
≤1µs P.W., 300pps
1.0
A
VR
Reverse Input Voltage Each
Channel
5
V
PD
Input Power Dissipation Each
Channel
6N135/6N136 and HCPL2503/4502
100
mW
HCPL-2530/253(3)
45
EMITTER
DETECTOR
IO (avg)
Average Output Current Each
Channel
8
mA
IO (pk)
Peak Output Current Each
Channel
16
mA
VEBR
Emitter-Base Reverse Voltage
5
V
VCC
Supply Voltage
-0.5 to 30
V
VO
Output Voltage
-0.5 to 20
V
IB
Base Current
6N135, 6N136 and HCPL2503 only
5
mA
PD
Output Power Dissipation
Each Channel
6N135, 6N136, HCPL2503, HCPL4502(4)
100
mW
HCPL2530, HCPL2531
35
mW
6N135, 6N136 and HCPL2503 only
Notes:
1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
2
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Device
Min.
Typ.*
Max.
Unit
1.7
V
EMITTER
VF
Input Forward Voltage
IF = 16mA, TA =25°C
1.45
IF = 16mA
Input Reverse Breakdown
Voltage
IR = 10 µA
∆VF/∆TA Temperature Coefficient of
Forward Voltage
IF = 16mA
BVR
1.8
5.0
V
-1.6
mV/°C
DETECTOR
IOH
ICCL
ICCH
Logic High Output Current
Logic Low Supply Current
Logic High Supply Current
IF = 0mA, VO = VCC = 5.5V,
TA =25°C
All
0.001
0.5
IF = 0mA, VO = VCC = 15V,
TA =25°C
6N135
6N136
HCPL4502
HCPL2503
0.005
1
IF = 0mA, VO = VCC = 15V
All
µA
50
IF = 16mA, VO = Open,
VCC = 15V
6N135
6N136
HCPL4502
HCPL2503
120
200
IF1 = IF2 = 16mA,
VO = Open, VCC = 15V
HCPL2530
HCPL2531
200
400
IF = 0mA, VO = Open,
VCC = 15V, TA =25°C
6N135
6N136
HCPL4502
HCPL2503
1
IF = 0mA, VO = Open,
VCC = 15V
6N135
6N136
HCPL4502
HCPL2503
2
IF = 0mA, VO = Open,
VCC = 15V
HCPL2530
HCPL2531
0.02
µA
µA
4
*All Typicals at TA = 25°C
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
3
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (TA = 0 to 70°C Unless otherwise specified)
Transfer Characteristics
Symbol
Parameter
Test Conditions
Device
Min. Typ.* Max. Unit
COUPLED
CTR
Current Transfer
Ratio(5)
IF = 16mA, VO = 0.4 V,
VCC = 4.5V, TA =25°C
IF = 16mA,
VCC = 4.5V
VOL
Logic LOW Output
Voltage
6N135
HCPL2530
7
18
50
%
6N136
HCPL4502
HCPL2531
19
27
50
%
HCPL2503
12
27
%
VOL = 0.4V
6N135
5
21
%
VOL = 0.5V
HCPL2530
VOL = 0.4V
6N136
HCPL4502
15
30
%
VOL = 0.5V
HCPL2531
VOL = 0.4V
HCPL2503
9
30
%
IF = 16mA, IO = 1.1mA,
VCC = 4.5V, TA =25°C
HCPL2530
0.18
0.5
IF = 16mA, IO = 3mA,
VCC = 4.5V, TA =25°C
6N136
HCPL2503
0.25
0.4
HCPL2531
0.25
6N135
0.18
0.4
V
0.5
IF = 16mA, IO = 0.8mA,
VCC = 4.5V
6N135
HCPL2530
0.5
IF = 16mA, IO = 2.4mA,
VCC = 4.5V
HCPL4502
HCPL2531
0.5
*All Typicals at TA = 25°C
Note:
5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF,
times 100%.
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
4
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Switching Characteristics (VCC = 5V)
Symbol Parameter
TPHL
TPLH
|CMH|
|CML|
Propagation Delay
Time to Logic LOW
Test Conditions
Device
Min.
Typ.*
Max.
Unit
TA = 25°C, RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
0.45
1.5
µs
RL = 1.9kΩ, IF = 16mA,
TA = 25°C(7) (Fig. 7)
6N136
HCPL4502
HCPL2503
HCPL2531
0.45
0.8
µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
2.0
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
6N136
HCPL4502
HCPL2503
HCPL2531
1.0
µs
TA = 25°C, (RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
0.5
1.5
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
TA = 25°C
6N136
HCPL4502
HCPL2503
HCPL2531
0.3
0.8
µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7)
6N135
HCPL2530
2.0
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
6N136
HCPL4502
HCPL2503
HCPL2531
1.0
µs
Common Mode
Transient
Immunity at
Logic High
IF = 0mA, VCM = 10VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL2530
10,000
V/µs
IF = 0mA, VCM = 10VP-P,
RL = 1.9kΩ, TA = 25°C(8) (Fig. 8)
6N136
HCPL4502
HCPL2503
HCPL2531
10,000
V/µs
Common Mode
Transient
Immunity at
Logic Low
IF = 16mA, VCM = 10 VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135
HCPL2530
10,000
V/µs
IF = 16mA, VCM = 10 VP-P,
RL = 1.9kΩ(8) (Fig. 8)
6N136
HCPL4502
HCPL2503
HCPL2531
10,000
V/µs
Propagation Delay
Time to Logic HIGH
** All Typicals at TA = 25°C
Notes:
6. The 4.1kΩ load represents 1 LSTTL unit load of 0.36mA and 6.1kΩ pull-up resistor.
7. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V).
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
5
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified)
Symbol
II-O
Characteristics
Test Conditions
Input-Output Insulation
Leakage Current
Relative humidity = 45%,
TA = 25°C, t = 5s,
VI-O = 3000 VDC(9)
VISO
Withstand Insulation Test
Voltage
RH ≤ 50%, TA = 25°C, II-O ≤ 2µA,
t = 1 min.(9)
RI-O
Resistance (Input to Output)
VI-O = 500VDC(9)
1MHz(9)
CI-O
Capacitance (Input to Output)
f=
HFE
DC Current Gain
IO = 3mA, VO = 5V(9)
II-I
Input-Input Insulation Leakage RH ≤ 45%, VI-I = 500VDC(10)
Current
t = 5 s, (HCPL2530/2531 only)
RI-I
Input-Input Resistance
CI-I
Input-Input Capacitance
Min
Typ**
2500
Max
Unit
1.0
µA
VRMS
1012
Ω
0.6
pF
150
0.005
µA
VI-I = 500 VDC(10)
(HCPL2530/2531 only)
1011
Ω
f = 1MHz)(10)
(HCPL2530/2531 only)
0.03
pF
Notes:
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are
shorted together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
6
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Fig. 2 Normalized CTR vs. Temperature
1.2
1.0
1.0
NORMALIZED CTR
NORMALIZED CTR
Fig. 1 Normalized CTR vs. Forward Current
1.2
0.8
0.6
0.4
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
IF = 16 mA
0.2
0.0
0.1
1
0.8
0.6
0.4
0.2
10
0.0
-60
100
-40
-20
IF - FORWARD CURRENT (mA)
IOH – LOGIC HIGH OUTPUT CURRENT (nA)
IO – OUTPUT CURRENT (mA)
IF = 40mA
IF = 35mA
12
IF = 30mA
10
IF = 25mA
8
IF = 20mA
6
IF = 15mA
4
IF = 10mA
2
IF = 5mA
2
4
6
8
10
12
14
40
60
80
100
16
18
80
100
1000
IF = 0 mA
VCC = 5 V
VO = 5 V
100
10
1
0.1
-60
0
0
20
Fig. 4 Logic High Output Current
vs. Temperature
16
14
0
TA - TEMPERATURE (°C)
Fig. 3 Output Current vs. Output Voltage
TA = 25°C
VCC = 5 V
IF = 16mA
VCC = 5 V
VO = 0.4 V
Normalized to:
TA = 25°C
20
-40
-20
0
20
40
60
TA – TEMPERATURE (°C)
VO – OUTPUT VOLTAGE (V)
Fig. 6 Propagation Delay vs. Load Resistance
Fig. 5 Propagation Delay vs. Temperature
800
10000
600
TP - PROPAGATION DELAY (ns)
Tp – PROPAGATION DELAY (ns)
700
RL = 4.1kΩ (TPLH)
500
RL = 4.1kΩ (TPLH)
400
RL = 1.9kΩ (TPHL)
300
RL = 1.9kΩ (TPLH)
200
IF = 16mA
VCC = 5 V
100
0
-60
-40
-20
0
20
40
60
80
IF - 16mA (TPHL)
IF - 16mA (TPLH)
IF - 10mA (TPLH)
VCC = 5 V
TA = 25°C
100
100
1
TA – TEMPERATURE (°C)
10
RL – LOAD RESISTANCE (kΩ)
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
IF - 10mA (TPHL)
1000
www.fairchildsemi.com
7
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Typical Performance Curves
Pulse
Generator I
F
tr = 5ns
Z O = 50 Ω
10% D.C.
I/f < 100µs
1
Noise
Shield
8
+
2
7
VF
-
3
6
VCC
VB
Pulse
Generator
tr = 5ns
Z O = 50 Ω
+5 V
10% DUTY CYCLE
I/f < 100µS
RL
VO
IF
MONITOR
0.1 µF
4
5
1
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502
8
VCC
+5 V
RL
VF1
-
7
2
V01
VO
C L = 1.5 µF
3
6
4
5
VF2
+
Rm
C L = 1.5 µF
GND
Noise
Shield
+
-
VO
I F Monitor
Rm
IF
V02
0.1 µF
GND
Test Circuit for HCPL-2530 and HCPL-2531
IF
0
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 7 Switching Time Test Circuit
IF
1
Noise
Shield
8
+
2
A
B
7
VCC
+
+5 V
IF
VB
VF1
-
RL
Noise
Shield
1
8
VCC
+5 V
RL
2
7
3
6
4
5
V01
VO
A
VF
-
3
6
VO
B
VO
VFF
0.1 µF
VFF
4
5
+
GND
VF2
+
-
V02
0.1 µF
GND
VCM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502
Test Circuit for HCPL-2530 and HCPL-2531
VCM 10 V
0V
90%
90%
10%
10%
tr
tf
VO
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 8 Common Mode Immunity Test Circuit
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
8
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Test Circuits
Through Hole
0.4" Lead Spacing
PIN 1
ID.
4
3
2
PIN 1
ID.
1
4
3
2
1
0.270 (6.86)
0.250 (6.35)
5
6
7
0.270 (6.86)
0.250 (6.35)
8
5
6
0.070 (1.78)
0.045 (1.14)
0.020 (0.51) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
7
8
0.390 (9.91)
0.370 (9.40)
SEATING PLANE
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0.070 (1.78)
0.045 (1.14)
0.004 (0.10) MIN
0.200 (5.08)
0.140 (3.55)
15° MAX
0.154 (3.90)
0.120 (3.05)
0.300 (7.62)
TYP
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
Surface Mount
0° to 15°
0.400 (10.16)
TYP
8-Pin DIP – Land Pattern
0.390 (9.91)
0.370 (9.40)
4
3
2
1
0.070 (1.78)
PIN 1
ID.
0.060 (1.52)
0.270 (6.86)
0.250 (6.35)
5
6
7
0.100 (2.54)
8
0.295 (7.49)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51)
MIN
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
0.415 (10.54)
0.300 (7.62)
TYP
0.030 (0.76)
0.016 (0.41)
0.008 (0.20)
0.045 (1.14)
0.315 (8.00)
MIN
0.405 (10.30)
MAX.
Note:
All dimensions are in inches (millimeters)
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
9
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Package Dimensions
Option
Example Part Number
Description
S
6N135S
SD
6N135SD
W
6N135W
0.4" Lead Spacing
V
6N135V
VDE0884
WV
6N135WV
VDE0884; 0.4” lead spacing
SV
6N135SV
VDE0884; surface mount
SDV
6N135SDV
Surface Mount Lead Bend
Surface Mount; Tape and reel
VDE0884; surface mount; tape and reel
Marking Information
1
V
3
2503
2
XX YY T1
6
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
10
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Ordering Information
12.0 ± 0.1
4.90 ± 0.20
4.0 ± 0.1
Ø1.55 ± 0.05
4.0 ± 0.1
0.30 ± 0.05
1.75 ± 0.10
7.5 ± 0.1
13.2 ± 0.2
10.30 ± 0.20
Ø1.6 ± 0.1
10.30 ± 0.20
0.1 MAX
16.0 ± 0.3
User Direction of Feed
Reflow Profile
Temperature (°C)
300
215 C, 10–30 s
250
225 C peak
200
150
Time above 183C, 60–150 sec
100
50
Ramp up = 3C/sec
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 225C (package surface temperature)
• Time of temperature higher than 183C for 60–150 seconds
• One time soldering reflow is recommended
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
11
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Tape Specifications
PDP SPM™
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
Saving our world, 1mW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™e-Series™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™ *
™
®
Fairchild®
®
Fairchild Semiconductor
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FlashWriter® *
®
®
The Power Franchise
TinyBoost™
TinyBuck™
®
TinyLogic
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
®
* EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The
datasheet is for reference information only.
Rev. I35
©2005 Fairchild Semiconductor Corporation
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7
www.fairchildsemi.com
12
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
Similar pages