Fairchild HCPL4503SM High speed transistor optocoupler Datasheet

HCPL4503M
High Speed Transistor Optocouplers
Features
Description
■ VISO = 5kV RMS is standard for all devices
■ High speed – 1MBit/s
The HCPL4503M optocoupler consists of an AlGaAs
LED optically coupled to a high speed photodetector
transistor.
■ Superior CMR, CMH = 50kV/ms (typical);
■
■
■
■
CML = 30kV/ms (typical)
No base connection for improved noise immunity
CTR guaranteed 0°C to 70°C
U.L. recognized (File # E90700, Vol 2)
VDE approval pending
Applications
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor.
The base of the phototransistor is not bonded out to a
pin for improved noise immunity.
An internal noise shield provides superior common mode
rejection of 15kV/µs minimum.
■ Line receivers
■ Pulse transformer replacement
■ Output interface to CMOS-LSTTL-TTL
■ Wide bandwidth analog coupling
Schematic
Package Outlines
N/C 1
8 VCC
+ 2
7 N/C
8
1
V
F
_
3
6 VO
8
8
1
N/C 4
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
5 GND
1
www.fairchildsemi.com
HCPL4503M — High Speed Transistor Optocouplers
August 2008
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Value
Units
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +100
°C
TSOL
Lead Solder Temperature
260 for 10 sec
°C
EMITTER
IF (avg)
DC/Average Forward Input Current
25
mA
IF (pk)
Peak Forward Input Current (50% duty cycle, 1ms P.W.)
50
mA
Peak Transient Input Current – (≤1µs P.W., 300pps)
1.0
A
5
V
IF (trans)
VR
Reverse Input Voltage
PD
Input Power Dissipation
100
mW
Average Output Current
8
mA
DETECTOR
IO (avg)
IO (pk)
16
mA
VCC
Supply Voltage
Peak Output Current
-0.5 to 30
V
VO
Output Voltage
-0.5 to 20
V
PD
Output Power Dissipation
100
mW
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
www.fairchildsemi.com
2
HCPL4503M — High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Min.
Typ.*
Max.
Unit
1.7
V
EMITTER
VF
Input Forward Voltage
IF = 16mA, TA = 25°C
1.45
IF = 16mA
1.8
BVR
Input Reverse Breakdown
Voltage
IR = 10µA
5.0
V
∆VF / ∆TA
Temperature Coefficient of
forward voltage
IF = 16mA
Logic high output current
IF = 0mA, VO = VCC = 5.5V,
TA = 25°C
0.001
0.5
IF = 0mA, VO = VCC = 15V,
TA = 25°C
0.005
1
-1.6
mV/°C
DETECTOR
IOH
IF = 0mA, VO = VCC = 15V
µA
50
ICCL
Logic low supply current
IF = 16mA, VO = Open, VCC = 15V
200
µA
ICCH
Logic high supply current
IF = 0mA, VO = Open, VCC = 15V,
TA = 25°C
120
1
µA
IF = 0mA, VO = Open, VCC = 15V
2
*All Typicals at TA = 25°C
Transfer Characteristics
Symbol
Parameter
Test Conditions
Min.
Typ.*
Max.
Unit
IF = 16mA, VO = 0.4V, VCC = 4.5V,
TA = 25°C(1)
19
27
50
%
IF = 16mA, VCC = 4.5V,
VOL = 0.5V
15
30
IF = 16mA, IO = 3 mA, VCC = 4.5V,
TA = 25°C
0.5
V
IF = 16mA, IO = 2.4mA,
VCC = 4.5V
0.5
COUPLED
CTR
VOL
Current Transfer Ratio(5)
Logic low output voltage
output voltage
*All Typicals at TA = 25°C
Note:
1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF,
times 100%.
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
www.fairchildsemi.com
3
HCPL4503M — High Speed Transistor Optocouplers
Electrical Characteristics (TA = 0 to 70°C unless otherwise specified)
Switching Characteristics (VCC = 5V)
Symbol
TPHL
Parameter
Propagation Delay
Time to Logic Low
Test Conditions
RL = 1.9kΩ, IF =
TA = 25°C
16mA(2)
Min.
(Fig. 7)
Typ.*
Max.
Unit
0.45
0.8
µs
1.0
µs
0.8
µs
1.0
µs
RL = 1.9kΩ, IF = 16mA(2) (Fig. 7)
TPLH
Propagation Delay
Time to Logic High
RL = 1.9kΩ, IF =
TA = 25°C
16mA(2)
(Fig. 7)
0.3
RL = 1.9kΩ, IF = 16mA(2) (Fig. 7)
|CMH|
Common Mode
Transient Immunity at
Logic High
IF = 0 mA, VCM = 1,500VP-P,
TA = 25°C, RL = 1.9kΩ(3)(Fig. 8)
15,000
50,000
V/µs
|CML|
Common Mode Transient
Immunity at Logic Low
IF = 16mA, VCM = 1,500VP-P,
RL = 1.9kΩ(3) (Fig. 8)
15,000
30,000
V/µs
Min.
Typ.**
*All Typicals at TA = 25°C
Isolation Characteristics
Symbol
II-O
Characteristics
Test Conditions
Input-Output
Insulation Leakage
Current
Relative humidity = 45%,
TA = 25°C, t = 5s,
VI-O = 3000VDC(4)
VISO
Withstand Insulation Test
Voltage
RH ≤ 50%, TA = 25°C,
II-O ≤ 2µA, t = 1 min.(4)
RI-O
Resistance
(input to output)
VI-O = 500VDC
CI-O
Capacitance
(input to output)
f = 1MHz(4)
5,000
Max.
Unit
1.0
µA
VRMS
1012
Ω
0.6
pF
Notes:
2. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor.
3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8V).
4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
www.fairchildsemi.com
4
HCPL4503M — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
Fig. 2 Normalized CTR vs. Temperature
1.2
1.0
1.0
NORMALIZED CTR
NORMALIZED CTR
Fig. 1 Normalized CTR vs. Forward Current
1.2
0.8
0.6
0.4
VO = 0.4V
VCC = 5V
TA = 25°C
Normalized to:
IF = 16mA
0.2
0.0
0.1
1
0.0
-60
100
IF = 16mA
VCC = 5V
VO = 0.4V
-40
-20
0
20
40
60
IF – FORWARD CURRENT (mA)
TA – TEMPERATURE (°C)
Fig. 3 Output Current vs. Output Voltage
Fig. 4 Logic High Output Current
vs. Temperature
IOH – LOGIC HIGH OUTPUT CURRENT (nA)
IO – OUTPUT CURRENT (mA)
0.4
0.2
10
TA = 25°C
VCC = 5V
IF = 40mA
IF = 35mA
12
IF = 30mA
10
IF = 25mA
8
IF = 20mA
6
IF = 15mA
4
IF = 10mA
2
IF = 5mA
2
4
6
8
10
12
14
16
18
20
80
100
80
100
1000
IF = 0mA
VCC = 5V
VO = 5V
100
10
1
0.1
-60
0
0
0.6
Normalized to:
TA = 25°C
16
14
0.8
-40
-20
0
20
40
60
TA – TEMPERATURE (°C)
VO – OUTPUT VOLTAGE (V)
Fig. 6 Propagation Delay vs. Load Resistance
Fig. 5 Propagation Delay vs. Temperature
800
10000
TP – PROPAGATION DELAY (ns)
Tp – PROPAGATION DELAY (ns)
700
600
RL = 4.1kΩ (TPLH)
500
RL = 4.1kΩ (TPLH)
400
300
RL = 1.9kΩ (TPHL)
RL = 1.9kΩ (TPLH)
200
IF = 16mA
VCC = 5V
100
IF – 10mA (TPHL)
1000
IF – 16mA (TPHL)
IF – 16mA (TPLH)
IF – 10mA (TPLH)
0
-60
-40
-20
0
20
40
60
80
100
100
1
TA – TEMPERATURE (°C)
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
VCC = 5 V
TA = 25°C
10
RL – LOAD RESISTANCE (kΩ)
www.fairchildsemi.com
5
HCPL4503M — High Speed Transistor Optocouplers
Typical Performance Curves
HCPL4503M — High Speed Transistor Optocouplers
Test Circuits
1
Pulse
Generator I
F
tr = 5ns
Z O = 50 Ω
10% D.C.
I/f < 100µs
Noise
Shield
8
VCC
+5 V
+
2
7
3
6
VF
-
N/C
RL
VO
VO
0.1 µF
I F Monitor
4
Rm
5
C L = 1.5 µF
GND
IF
0
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 7 Switching Time Test Circuit
IF
1
Noise
Shield
8
VCC
+5 V
+
2
7
3
6
VF
-
A
B
N/C
RL
VO
VO
0.1 µF
VFF
4
5
GND
-
VCM
+
-
Pulse Gen
VCM 10 V
0V
90%
90%
10%
10%
tr
tf
VO
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 8 Common Mode Immunity Test Circuit
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
www.fairchildsemi.com
6
Through Hole
0.4" Lead Spacing
PIN 1
ID.
4
3
2
PIN 1
ID.
1
4
3
2
1
0.270 (6.86)
0.250 (6.35)
5
6
7
0.270 (6.86)
0.250 (6.35)
8
5
6
0.070 (1.78)
0.045 (1.14)
0.020 (0.51) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
7
8
0.390 (9.91)
0.370 (9.40)
SEATING PLANE
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0.070 (1.78)
0.045 (1.14)
0.004 (0.10) MIN
0.200 (5.08)
0.140 (3.55)
15° MAX
0.154 (3.90)
0.120 (3.05)
0.300 (7.62)
TYP
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
Surface Mount
0° to 15°
0.400 (10.16)
TYP
8-Pin DIP – Land Pattern
0.390 (9.91)
0.370 (9.40)
4
3
2
1
0.070 (1.78)
PIN 1
ID.
0.060 (1.52)
0.270 (6.86)
0.250 (6.35)
5
6
7
0.100 (2.54)
8
0.295 (7.49)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51)
MIN
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
0.415 (10.54)
0.300 (7.62)
TYP
0.030 (0.76)
0.016 (0.41)
0.008 (0.20)
0.045 (1.14)
0.315 (8.00)
MIN
0.405 (10.30)
MAX.
Note:
All dimensions are in inches (millimeters)
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
www.fairchildsemi.com
7
HCPL4503M — High Speed Transistor Optocouplers
Package Dimensions
Option
Example Part Number
Description
No Option
HCPL4503M
S
HCPL4503SM
SD
HCPL4503SDM
T
HCPL4503TM
0.4" Lead Spacing
V
HCPL4503VM
VDE0884
TV
HCPL4503TVM
VDE0884; 0.4” Lead Spacing
SV
HCPL4503SVM
VDE0884; Surface Mount
SDV
HCPL4503SDVM
Standard Through Hole
Surface Mount Lead Bend
Surface Mount; Tape and Reel
VDE0884; Surface Mount; Tape and Reel
Marking Information
1
4503
V
3
XX YY
B
2
6
5
4
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
Two digit year code, e.g., ‘03’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
www.fairchildsemi.com
8
HCPL4503M — High Speed Transistor Optocouplers
Ordering Information
D0
P0
t
K0
P2
E
F
A0
W1
W
B0
P
User Direction of Feed
d
Symbol
Description
W
t
D1
Dimension in mm
Tape Width
16.0 ± 0.3
Tape Thickness
0.30 ± 0.05
P0
Sprocket Hole Pitch
4.0 ± 0.1
D0
Sprocket Hole Diameter
1.55 ± 0.05
E
Sprocket Hole Location
1.75 ± 0.10
F
Pocket Location
7.5 ± 0.1
4.0 ± 0.1
P2
P
Pocket Pitch
12.0 ± 0.1
A0
Pocket Dimensions
10.30 ±0.20
B0
10.30 ±0.20
K0
4.90 ±0.20
W1
d
R
Cover Tape Width
1.6 ± 0.1
Cover Tape Thickness
0.1 max
Max. Component Rotation or Tilt
10°
Min. Bending Radius
30
Reflow Profile
245 C, 10–30 s
Temperature (°C)
300
260 C peak
250
200
150
Time above 183C, <160 sec
100
50
Ramp up = 2–10C/sec
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 260 C (package surface temperature)
• Time of temperature higher than 183 C for 160 seconds or less
• One time soldering reflow is recommended
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
www.fairchildsemi.com
9
HCPL4503M — High Speed Transistor Optocouplers
Carrier Tape Specifications
PDP SPM™
Power-SPM™
PowerTrench®
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
Saving our world, 1mW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™e-Series™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™ *
™
®
Fairchild®
®
Fairchild Semiconductor
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FlashWriter® *
®
®
The Power Franchise
TinyBoost™
TinyBuck™
®
TinyLogic
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
®
* EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The
datasheet is for reference information only.
Rev. I35
©2005 Fairchild Semiconductor Corporation
HCPL4503M Rev. 1.0.3
www.fairchildsemi.com
10
HCPL4503M — High Speed Transistor Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
Similar pages