RENESAS HD74HC375P

HD74HC375
Quad. Bistable Latches
REJ03D0621-0200
(Previous ADE-205-500)
Rev.2.00
Mar 30, 2006
Description
This latch is ideally suited for use as temporary storage for binary information between processing units and
input/output or indicator units. Information present at a data (D) input is transferred to the Q output when the enable
(G) is high and the Q output will follow the data input as long as the enable remains high. When the enable goes low,
the information (that was present at the data input at the time the transition occurred) is retained at the Q output until the
enable goes high.
Features
• High Speed Operation: tpd (Data to Q, Q) = 10 ns typ (CL = 50 pF)
• High Output Current: Fanout of 10 LSTTL Loads
• Wide Operating Voltage: VCC = 2 to 6 V
• Low Input Current: 1 µA max
• Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)
• Ordering Information
Part Name
Package Code
(Previous Code)
PRDP0016AE-B
(DP-16FV)
PRSP0016DH-B
(FP-16DAV)
Package Type
HD74HC375P
DILP-16 pin
HD74HC375FPEL
SOP-16 pin (JEITA)
Package
Abbreviation
P
—
FP
EL (2,000 pcs/reel)
PRSP0016DG-A
RP
(FP-16DNV)
Note: Please consult the sales office for the above package availability.
HD74HC375RPEL
Taping Abbreviation
(Quantity)
SOP-16 pin (JEDEC)
EL (2,500 pcs/reel)
Function Table
Inputs
Note:
Outputs
D
G
Q
Q
L
H
H
H
L
H
H
L
X
L
no change
1. H; High level, L; Low level, X; Irrelevant, Z; High impedance
Rev.2.00 Mar 30, 2006 page 1 of 6
no change
HD74HC375
Pin Arrangement
1D 1
16 VCC
1Q 2
Q D
1Q 3
Q C
Enable
1 to 2 4
2Q 5
Q C
2Q 6
Q D
2D 7
15 4D
D Q
14 4Q
C Q
13 4Q
12
Enable
3 to 4
C Q
11 3Q
D Q
10 3Q
GND 8
9
3D
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
Input / Output voltage
VCC
VIN, VOUT
–0.5 to 7.0
–0.5 to VCC +0.5
V
V
IIK, IOK
IOUT
±20
±25
mA
mA
ICC or IGND
PT
±50
500
mA
mW
Input / Output diode current
Output current
VCC, GND current
Power dissipation
Storage temperature
Tstg
–65 to +150
°C
Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of
which may be realized at the same time.
Recommended Operating Conditions
Item
Supply voltage
Symbol
VCC
Ratings
2 to 6
Unit
V
Input / Output voltage
Operating temperature
VIN, VOUT
Ta
0 to VCC
–40 to 85
V
°C
tr , tf
0 to 1000
0 to 500
ns
Input rise / fall time
Note:
*1
0 to 400
1. This item guarantees maximum limit when one input switches.
Waveform: Refer to test circuit of switching characteristics.
Rev.2.00 Mar 30, 2006 page 2 of 6
Conditions
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
HD74HC375
Electrical Characteristics
Ta = 25°C
Item
Input voltage
Symbol VCC (V)
VIH
VIL
Output voltage
VOH
VOL
Ta = –40 to+85°C
2.0
Min
1.5
Typ
—
Max
—
Min
1.5
Max
—
4.5
6.0
3.15
4.2
—
—
—
—
3.15
4.2
—
—
2.0
4.5
—
—
—
—
0.5
1.35
—
—
0.5
1.35
6.0
2.0
—
1.9
—
2.0
1.8
—
—
1.9
1.8
—
4.5
6.0
4.4
5.9
4.5
6.0
—
—
4.4
5.9
—
—
4.5
6.0
4.18
5.68
—
—
—
—
4.13
5.63
—
—
2.0
4.5
—
—
0.0
0.0
0.1
0.1
—
—
0.1
0.1
6.0
4.5
—
—
0.0
—
0.1
0.26
—
—
0.1
0.33
Unit
Test Conditions
V
V
V
Vin = VIH or VIL IOH = –20 µA
IOH = –4 mA
IOH = –5.2 mA
V
Vin = VIH or VIL IOL = 20 µA
IOH = 4 mA
Input current
Iin
6.0
6.0
—
—
—
—
0.26
±0.1
—
—
0.33
±1.0
IOH = 5.2 mA
µA Vin = VCC or GND
Quiescent supply
current
ICC
6.0
—
—
4.0
—
40
µA Vin = VCC or GND, Iout = 0 µA
Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25°C
Item
Propagation delay
time
Pulse width
Symbol VCC (V)
tPLH
tPHL
2.0
4.5
6.0
—
—
10
—
29
25
—
—
36
31
tPLH
tPHL
2.0
4.5
—
—
—
11
160
32
—
—
200
40
tw
6.0
2.0
—
80
—
—
27
—
—
100
34
—
4.5
6.0
16
14
5
—
—
—
20
17
—
—
2.0
4.5
100
20
—
2
—
—
125
25
—
—
6.0
2.0
17
5
—
—
—
—
21
5
—
—
4.5
6.0
5
5
–1
—
—
—
5
5
—
—
tTLH
tTHL
2.0
4.5
—
—
—
5
75
15
—
—
95
19
Cin
6.0
—
—
—
—
5
13
10
—
—
16
10
Setup time
tsu
Hold time
th
Output rise/fall
time
Input capacitance
Ta = –40 to +85°C
Min
—
Rev.2.00 Mar 30, 2006 page 3 of 6
Typ
—
Max
145
Min
—
Max
180
Unit
Test Conditions
ns
Data to Q or Q
ns
G to Q or Q
ns
ns
ns
ns
pF
HD74HC375
Test Circuit
VCC
VCC
Output
See Function Table
Input
Pulse Generator
Zout = 50 Ω
Input
Pulse Generator
Zout = 50 Ω
Enable G
Q
CL = 50 pF
Output
Q
D
CL = 50 pF
Note : 1. CL includes probe and jig capacitance.
Waveforms
• Waveform – 1
tr
tf
VCC
90 %
90 %
Input D
50 %
50 %
tW
10 %
50 %
10 %
t su
0V
th
tW
t su
VCC
90 %
50 % 50 %
Enable G
10 %
tW
t PLH
50 %
50 %
10 %
0V
tW
t PHL
90 %
90 %
50 %
Output Q
50 %
10 %
10 %
t TLH
t PHL
Output Q
th
tf
tr
VOL
t THL
t PLH
90 %
90 %
50 %
10 %
t THL
50 %
10 %
t TLH
Notes: 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns
Rev.2.00 Mar 30, 2006 page 4 of 6
VOH
VOH
VOL
HD74HC375
• Waveform – 2
tr
tf
VCC
90 %
50 %
90 %
50 %
Input D
10 %
10 %
t PLH
0V
t PHL
90 %
VOH
90 %
50 %
10 %
Output Q
t PHL
50 %
10 %
t TLH
VOL
t THL
t PLH
VOH
90 %
90 %
50 %
10 %
Output Q
50 %
10 %
VOL
t TLH
t THL
Note: 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns
Package Dimensions
JEITA Package Code
P-DIP16-6.3x19.2-2.54
RENESAS Code
PRDP0016AE-B
Previous Code
DP-16FV
MASS[Typ.]
1.05g
D
9
E
16
1
8
b3
0.89
A1
A
Z
L
Reference
Symbol
e
bp
θ
c
e1
( Ni/Pd/Au plating )
Rev.2.00 Mar 30, 2006 page 5 of 6
e1
D
E
A
A1
bp
b3
c
θ
e
Z
L
Dimension in Millimeters
Min
Nom Max
7.62
19.2 20.32
6.3 7.4
5.06
0.51
0.40 0.48 0.56
1.30
0.19 0.25 0.31
0°
15°
2.29 2.54 2.79
1.12
2.54
HD74HC375
JEITA Package Code
P-SOP16-5.5x10.06-1.27
RENESAS Code
PRSP0016DH-B
*1
Previous Code
FP-16DAV
MASS[Typ.]
0.24g
D
F
16
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
9
*2
c
E
HE
bp
Index mark
Terminal cross section
( Ni/Pd/Au plating )
1
8
e
Z
*3
bp
x
Reference
Symbol
M
A
L1
θ
A1
y
L
Detail F
JEITA Package Code
P-SOP16-3.95x9.9-1.27
RENESAS Code
PRSP0016DG-A
*1
Previous Code
FP-16DNV
D
E
A2
A1
A
bp
b1
c
c1
θ
HE
e
x
y
Z
L
L1
Dimension in Millimeters
Min Nom Max
10.06 10.5
5.50
0.00 0.10 0.20
2.20
0.34 0.40 0.46
0.15 0.20 0.25
0°
8°
7.50 7.80 8.00
1.27
0.12
0.15
0.80
0.50 0.70 0.90
1.15
MASS[Typ.]
0.15g
D
F
16
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
9
c
*2
Index mark
HE
E
bp
Terminal cross section
( Ni/Pd/Au plating )
1
Z
Reference
Symbol
8
e
*3
bp
x
M
A
L1
A1
θ
L
y
Detail F
Rev.2.00 Mar 30, 2006 page 6 of 6
D
E
A2
A1
A
bp
b1
c
c1
θ
HE
e
x
y
Z
L
L1
Dimension in Millimeters
Min Nom Max
9.90 10.30
3.95
0.10 0.14 0.25
1.75
0.34 0.40 0.46
0.15 0.20 0.25
0°
8°
5.80 6.10 6.20
1.27
0.25
0.15
0.635
0.40 0.60 1.27
1.08
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .6.0