HD74LS139 Dual 2-line-to-4-line Decoders / Demultiplexers REJ03D0435–0200 Rev.2.00 Feb.18.2005 The HD74LS139 comprises two individual two-line-to-four-line decoder in a single package. The active-low enable input can be used as a data line in demultiplexing applications. Features • Ordering Information Part Name Package Type Package Code (Previous Code) Package Abbreviation Taping Abbreviation (Quantity) HD74LS139P DILP-16 pin PRDP0016AE-B (DP-16FV) P — HD74LS139FPEL SOP-16 pin (JEITA) PRSP0016DH-B (FP-16DAV) FP EL (2,000 pcs/reel) PRSP0016DG-A RP (FP-16DNV) Note: Please consult the sales office for the above package availability. HD74LS139RPEL SOP-16 pin (JEDEC) EL (2,500 pcs/reel) Pin Arrangement Enable 1G 1 1A 2 A 1B 3 1Y0 Select Inputs Data Outputs 16 VCC G 15 2G Enable B A 14 2A 4 Y0 B 13 2B 1Y1 5 Y1 Y0 12 2Y0 1Y2 6 Y2 Y1 11 2Y1 1Y3 7 Y3 Y2 10 2Y2 GND 8 9 2Y3 G Y3 (Top view) Rev.2.00, Feb.18.2005, page 1 of 6 Select Inputs Data Outputs HD74LS139 Function Table Inputs Enable G H L L L L Outputs Select B X L L H H A X L H L H Y0 H L H H H Y1 H H L H H Y2 H H H L H Y3 H H H H L H ; high level, L ; low level, X ; irrelevant Block Diagram 1Y0 Enable 1G 1Y1 1Y2 Select Inputs 1A 1Y3 1B Data Outputs 2Y0 Enable 2G 2Y1 2Y2 Select Inputs 2A 2Y3 2B Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage VCC 7 V Input voltage VIN 7 V PT 400 mW Tstg –65 to +150 °C Power dissipation Storage temperature Note: Voltage value, unless otherwise noted, are with respect to network ground terminal. Recommended Operating Conditions Item Supply voltage Output current Operating temperature Rev.2.00, Feb.18.2005, page 2 of 6 Symbol Min Typ Max Unit VCC 4.75 5.00 5.25 V IOH — — –400 µA IOL — — 8 mA Topr –20 25 75 °C HD74LS139 Electrical Characteristics (Ta = –20 to +75 °C) Item Symbol VIH VIL VOH Input voltage Output voltage VOL IIH IIL Input current II Short-circuit output IOS current Supply current ICC Input clamp voltage VIK Note: * VCC = 5 V, Ta = 25°C min. 2.0 — 2.7 typ.* — — — max. — 0.8 — Unit V V V — — — — — — — — — — 0.4 0.5 20 –0.4 0.1 µA mA mA VCC = 5.25 V, VI = 2.7 V VCC = 5.25 V, VI = 0.4 V VCC = 5.25 V, VI = 7 V –5 — –42 mA VCC = 5.25 V — — 6.8 — 11 –1.5 mA V VCC = 5.25 V, Outputs enabled and open VCC = 4.75 V, IIN = –18 mA V Condition VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V, IOH = –400 µA IOL = 4 mA VCC = 4.75 V, VIH = 2 V, VIL = 0.8 V IOL = 8 mA Switching Characteristics (VCC = 5 V, Ta = 25°C) Item Symbol Inputs Output Propagation delay time tPLH tPHL tPLH tPLH tPLH tPHL Binary select 1A, 1B 2A, 2B 1Y0 to 1Y3 2Y0 to 2Y3 Enable 1G, 2G 1Y0 to 1Y3 2Y0 to 2Y3 Rev.2.00, Feb.18.2005, page 3 of 6 Levels of delay 2 3 2 min. typ. max. Unit Condition — — — — 13 22 18 25 20 33 29 38 ns ns ns ns CL = 15 pF, RL = 2 kΩ — — 16 21 24 32 ns ns HD74LS139 Testing Method Test Circuit VCC Output 4.5V RL Load circuit 1 1Y0 CL See Function Table P.G. Zout = 50Ω Output 1G Input 2G 1Y1 Same as Load Circuit 1. Output 1A 1Y2 1B Same as Load Circuit 1. Output 2A 1Y3 2B Same as Load Circuit 1. Output 2Y0 Same as Load Circuit 1. Output 2Y1 Same as Load Circuit 1. Output 2Y2 Same as Load Circuit 1. Output 2Y3 Notes: Same as Load Circuit 1. 1. CL includes probe and jig capacitance. 2. All diodes are 1S2074(H). Waveform tTHL tTLH 90% 1.3 V Input 3V 90% 1.3 V 10% 10% 0V tPHL tPLH VOH In phase output 1.3 V 1.3 V VOL tPHL tPLH VOH Out of phase output 1.3 V 1.3 V VOL Note: Input pulse; tTLH ≤ 15 ns, tTHL ≤ 6 ns, PRR = 1 MHz, duty cycle 50% Rev.2.00, Feb.18.2005, page 4 of 6 HD74LS139 Package Dimensions JEITA Package Code P-DIP16-6.3x19.2-2.54 RENESAS Code PRDP0016AE-B MASS[Typ.] 1.05g Previous Code DP-16FV D 9 E 16 1 8 b3 0.89 Z A1 A Reference Symbol L e Nom θ c e1 D 19.2 E 6.3 JEITA Package Code P-SOP16-5.5x10.06-1.27 RENESAS Code PRSP0016DH-B *1 Previous Code FP-16DAV 7.4 A1 0.51 b p 0.40 b 3 0.48 0.56 1.30 c 0.19 θ 0° e 2.29 0.25 0.31 2.54 2.79 15° 1.12 L 2.54 MASS[Typ.] 0.24g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. D F 16 20.32 5.06 Z ( Ni/Pd/Au plating ) Max 7.62 1 A bp e Dimension in Millimeters Min 9 c HE *2 E bp Index mark Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) 1 Z *3 bp Nom D 10.06 E 5.50 Max 10.5 A2 8 e Dimension in Millimeters Min x A1 M 0.00 0.10 0.20 0.34 0.40 0.46 0.15 0.20 0.25 7.80 8.00 A L1 2.20 bp b1 c A c A1 θ y L Detail F 1 θ 0° HE 7.50 e 1.27 x 0.12 y 0.15 0.80 Z L L Rev.2.00, Feb.18.2005, page 5 of 6 8° 0.50 1 0.70 1.15 0.90 HD74LS139 JEITA Package Code P-SOP16-3.95x9.9-1.27 RENESAS Code PRSP0016DG-A *1 Previous Code FP-16DNV MASS[Typ.] 0.15g D NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F 16 9 c *2 Index mark HE E bp Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) Dimension in Millimeters Min Nom Max D 9.90 10.30 E 3.95 A2 8 1 Z e *3 bp x A1 0.10 0.14 0.25 0.34 0.40 0.46 0.15 0.20 0.25 6.10 6.20 1.75 A M L1 bp b1 c A c A1 θ L y Detail F 1 θ 0° HE 5.80 1.27 e x 0.25 y 0.15 0.635 Z 0.40 L L Rev.2.00, Feb.18.2005, page 6 of 6 8° 1 0.60 1.08 1.27 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .2.0