Renesas HD74LV10AFPEL Triple 3-input positive nand gate Datasheet

HD74LV10A
Triple 3-input Positive NAND Gates
REJ03D0233–0300Z
(Previous ADE-205-251A (Z))
Rev.3.00
May 24, 2004
Description
The HD74LV10A performs the Boolean functions Y = A•B•C or Y = A+B+C in positive logic.
Low-voltage and high-speed operation is suitable for the battery-powered products (e.g., notebook computers), and the
low-power consumption extends the battery life.
Features
•
•
•
•
•
•
•
VCC = 2.0 V to 5.5 V operation
All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V)
Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C)
Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74LV10AFPEL
SOP–14 pin(JEITA)
FP–14DAV
FP
EL (2,000 pcs/reel)
HD74LV10ARPEL
HD74LV10ATELL
SOP–14 pin(JEDEC)
TSSOP–14 pin
FP–14DNV
TTP–14DV
RP
T
EL (2,500 pcs/reel)
ELL (2,000 pcs/reel)
Note: Please consult the sales office for the above package availability.
Function Table
Inputs
A
B
C
Output Y
H
L
X
X
H
X
L
X
H
X
X
L
L
H
H
H
Note: H: High level
L: Low level
X: Immaterial
Rev.3.00, May 24, 2004, page 1 of 1
HD74LV10A
Pin Arrangement
14 VCC
1A 1
1B
2
13 1C
2A
3
12 1Y
2B 4
11 3C
2C 5
10 3B
6
9 3A
GND 7
8 3Y
2Y
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
Input voltage range*1
Output voltage range*1, 2
VCC
VI
VO
V
V
V
Input clamp current
Output clamp current
Continuous output current
IIK
IOK
IO
Continuous current through
VCC or GND
ICC or IGND
–0.5 to 7.0
–0.5 to 7.0
–0.5 to VCC + 0.5
–0.5 to 7.0
–20
±50
±25
±50
Maximum power dissipation at
3
Ta = 25°C (in still air)*
PT
Storage temperature
Tstg
785
500
–65 to 150
mA
mA
mA
mA
mW
Conditions
Output: H or L
VCC: OFF
VI < 0
VO < 0 or VO > VCC
VO = 0 to VCC
SOP
TSSOP
°C
Notes: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of
which may be realized at the same time.
1. The input and output voltage ratings may be exceeded even if the input and output clamp-current ratings are
observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.3.00, May 24, 2004, page 2 of 7
HD74LV10A
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
Input voltage range
Output voltage range
Output current
VI
VO
IOH
2.0
0
0
—
—
—
—
—
—
—
—
0
0
0
5.5
5.5
VCC
–50
–2
–6
–12
50
2
6
12
200
100
20
V
V
V
µA
mA
–40
85
°C
IOL
Input transition rise or fall rate
∆t /∆v
Operating free-air temperature
Ta
Conditions
VCC = 2.0 V
VCC = 2.3 to 2.7 V
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
VCC = 2.0 V
VCC = 2.3 to 2.7 V
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
VCC = 2.3 to 2.7 V
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
µA
mA
ns/V
Note: Unused or floating inputs must be held high or low.
Logic Diagram
A
B
C
Rev.3.00, May 24, 2004, page 3 of 7
Y
HD74LV10A
DC Electrical Characteristics
Ta = –40 to 85°C
Item
Symbol
VCC (V)*
Min
Typ
Max
Unit
Input voltage
VIH
1.5
VCC × 0.7
VCC × 0.7
VCC × 0.7
—
—
—
—
VCC – 0.1
2.0
2.48
3.8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0.5
VCC × 0.3
VCC × 0.3
VCC × 0.3
—
—
—
—
0.1
0.4
0.44
0.55
±1
20
V
Input current
Quiescent supply
current
IIN
ICC
2.0
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
2.0
2.3 to 2.7
3.0 to 3.6
4.5 to 5.5
Min to Max
2.3
3.0
4.5
Min to Max
2.3
3.0
4.5
0 to 5.5
5.5
Output leakage
current
IOFF
0
—
—
Input capacitance
CIN
3.3
—
3.5
VIL
Output voltage
VOH
VOL
Test Conditions
µA
µA
IOH = –50 µA
IOH = –2 mA
IOH = –6 mA
IOH = –12 mA
IOL = 50 µA
IOL = 2 mA
IOL = 6 mA
IOL = 12 mA
VIN = 5.5 V or GND
VIN = VCC or GND, IO = 0
5
µA
VI or VO = 0 V to 5.5 V
—
pF
VI = VCC or GND
V
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Switching Characteristics
VCC = 2.5 ± 0.2 V
Ta = 25°C
Ta = –40 to 85°C
Item
Symbol
Min
Typ
Max
Min
Max
Unit
Propagation
delay time
tPLH
tPHL
—
—
8.0
10.4
13.0
17.1
1.0
1.0
15.5
20.5
ns
Test
Conditions
FROM
(Input)
TO
(Output)
CL = 15 pF
CL = 50 pF
A, B,
or C
Y
VCC = 3.3 ± 0.3 V
Ta = 25°C
Ta = –40 to 85°C
Item
Symbol
Min
Typ
Max
Min
Max
Unit
Propagation
delay time
tPLH
tPHL
—
—
5.7
8.2
8.4
11.9
1.0
1.0
10.0
13.5
ns
Test
Conditions
FROM
(Input)
TO
(Output)
CL = 15 pF
CL = 50 pF
A, B,
or C
Y
Test
Conditions
FROM
(Input)
TO
(Output)
CL = 15 pF
CL = 50 pF
A, B,
or C
Y
VCC = 5.0 ± 0.5 V
Ta = 25°C
Ta = –40 to 85°C
Item
Symbol
Min
Typ
Max
Min
Max
Unit
Propagation
delay time
tPLH
tPHL
—
—
3.9
5.4
5.9
7.9
1.0
1.0
7.0
9.0
ns
Rev.3.00, May 24, 2004, page 4 of 7
HD74LV10A
Operating Characteristics
CL = 50 pF
Ta = 25°C
Item
Symbol
VCC (V)
Min
Typ
Max
Unit
Test Conditions
Power dissipation capacitance
CPD
3.3
5.0
—
—
9.5
11.0
—
—
pF
f = 10 MHz
Noise Characteristics
CL = 50 pF
Ta = 25°C
Item
Symbol
VCC (V)
Min
Typ
Max
Unit
Quiet output, maximum
dynamic VOL
VOL (P)
3.3
—
0.2
0.8
V
Quiet output, minimum
dynamic VOL
VOL (V)
3.3
—
–0.1
–0.8
Quiet output, minimum
dynamic VOH
VOH (V)
3.3
—
3.2
—
High-level dynamic input
voltage
VIH (D)
3.3
2.31
—
—
Low-level dynamic inout
voltage
VIL (D)
3.3
—
—
0.99
Test Circuit
Measurement point
CL*
Note: C L includes the probe and jig capacitance.
Rev.3.00, May 24, 2004, page 5 of 7
V
Test Conditions
HD74LV10A
• Waveform − 1
tr
Input
10%
tf
90%
50% VCC
90%
50% VCC
VCC
10%
0V
t PHL
t PLH
VOH
In phase output
50% VCC
50% VCC
VOL
t PHL
t PLH
VOH
50% VCC
Out of phase output
50% VCC
VOL
Notes: 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns
2. The output are measured one at a time with one transition per measurement.
Package Dimensions
As of January, 2003
Unit: mm
10.06
10.5 Max
8
5.5
14
1
1.27
*0.40 ± 0.06
0.10 ± 0.10
1.42 Max
*0.20 ± 0.05
2.20 Max
7
0.20
7.80 +– 0.30
1.15
0˚ – 8˚
0.70 ± 0.20
0.15
0.12 M
*Ni/Pd/Au plating
Rev.3.00, May 24, 2004, page 6 of 7
Package Code
JEDEC
JEITA
Mass (reference value)
FP-14DAV
—
Conforms
0.23 g
HD74LV10A
As of January, 2003
Unit: mm
8.65
9.05 Max
8
1
7
*0.20 ± 0.05
0.635 Max
1.75 Max
3.95
14
+ 0.10
6.10 – 0.30
1.08
+ 0.11
0˚ – 8˚
+ 0.67
0.14 – 0.04
1.27
*0.40 ± 0.06
0.60 – 0.20
0.15
0.25 M
Package Code
JEDEC
JEITA
Mass (reference value)
*Ni/Pd/Au plating
FP-14DNV
Conforms
Conforms
0.13 g
As of January, 2003
Unit: mm
4.40
5.00
5.30 Max
14
8
1
7
0.65
1.0
*0.20 ± 0.05
0.13 M
6.40 ± 0.20
*Ni/Pd/Au plating
Rev.3.00, May 24, 2004, page 7 of 7
0.07 +0.03
–0.04
0.10
*0.15 ± 0.05
1.10 Max
0.83 Max
0˚ – 8˚
0.50 ± 0.10
Package Code
JEDEC
JEITA
Mass (reference value)
TTP-14DV
—
—
0.05 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2004. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .1.0
Similar pages