HP HDSP-301Y-K0300 10 mm and 13 mm slim font seven segment display Datasheet

Agilent HDSP-301x/303x Series
HDSP-561x/563x Series
10 mm and 13 mm Slim Font
Seven Segment Displays
Data Sheet
Features
• Excellent appearance
• Slim font design
• Mitered corners, evenly
illuminated segments
Description
These slim font seven segment
displays incorporate a new slim
font character design. This slim
font features narrow width,
specially mitered segments to
give a fuller appearance to the
illuminated character. Faces of
these displays are painted a
neutral gray for enhanced on/off
contrast.
All devices are available in either
common anode or common
cathode configuration with right
hand decimal point.
• Gray face for optimum on/off
contrast
• Choice of colors: HER, green,
yellow, and AlGaAs
• Choice of character size: 10 mm
and 13 mm
• Characterized for luminous
intensity
Devices
HER
HDSP301E
303E
561E
563E
Green
HDSP301G
303G
561G
563G
Yellow
HDSP301Y
303Y
561Y
563Y
AlGaAs
HDSP301A
303A
561A
563A
Description
Common Anode, 10 mm Display
Common Cathode, 10 mm Display
Common Anode, 13 mm Display
Common Cathode, 13 mm Display
Part Numbering System
5082 - x xx x - x x x xx
HDSP - x xx x - x x x xx
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
A: AlGaAs Red
E: High Efficiency Red
G: Green
Y: Yellow
Device Specific Configuration[1]
Refer to Respective Data Sheet
Package[1]
Refer to Respective Data Sheet
Notes:
1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative
for details.
2. Bin options refer to shippable bins for a part-number. Color and Intensity Binbs are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective data sheet for specific bin limit information.
2
HDSP-301x/303x Series
FRONT VIEW
RIGHT SIDE
6.00
(0.236)
COUNTRY
OF ORIGIN
10.00
(0.394)
1.85
(0.073)
Ø 1.20
(0.047)
COLOR BIN
HDSP-XXXX
YWW XZ COO
10.00°
LUMINOUS
INTENSITY
CATEGORY
0.90
(0.035)
12.80 ± 0.25
(0.504)
2.54 ± 0.38
(0.100)
4 x 2.54
(0.400)
0.53 ± 0.05
(0.021)
6.40 ± 0.25
(0.252)
7.00 ± 0.25
(0.276)
TOP SIDE
DATE CODE
10.40 MIN.
(0.409)
9.70 ± 0.25
(0.382)
A
1 +
+ 10
2 + F
+ 9
G
B
+ 8
3 +
4 +
E
D
0.30 ± 0.05
(0.012)
5 +
C + 7
DP
+ 6
PIN 6
7.62 ± 0.38
(0.300)
NOTE: QDSP-399G DOES NOT HAVE PIN 6.
Pin
1
2
3
4
5
6
7
8
9
10
3
Function
G
F
Common A/C
E
D
DP
C
Common A/C
B
A
HDSP-561x/563x Series
45°
7.40
(0.292)
10°
1.25
(0.049)
13.00
(0.512)
15.24 ± 0.3
(0.600)
17.50 ± 0.3/–0.25
(0.689)
0.29 ± 0.08 TYP.
(0.011)
1.25
Ø (0.049)
6.40 ± 0.25
(0.252)
3.60 ± 0.3
(0.142)
7.00 ± 0.25
(0.276)
12.25 ± 0.25
(0.482)
10
8
9
6
7
a
f
b
g
0.58 ± 0.08
(0.023)
3.59 ± 0.3 TYP.
(0.141)
e
c
2.54 ± 0.3 TYP.
(0.100)
1
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. UNLESS OTHERWISE STATED, TOLERANCES ARE ±0.25 mm.
Pin
1
2
3
4
5
6
7
8
9
10
4
Function
E
D
Common A/C
C
DP
B
A
Common A/C
F
G
DP
d
2
3
4
5
Absolute Maximum Ratings
Description
Average Power per Segment or DP
Peak Forward Current per Segment or DP
DC Forward Current per Segment or DP
Operating Temperature Range
Storage Temperature Range
Reverse Voltage per Segment or DP
Wavesoldering Temperature for 3 Seconds
1.59 mm below body
HER
105
90
30
–40 to +80
–40 to +80
5
250
Green
105
90
30
–40 to +80
–40 to +80
5
250
Yellow
105
90
30
–40 to +80
–40 to +80
5
250
AlGaAs
37
45
15
–20 to +80
–40 to +80
5
250
Units
mW
mA
mA
˚C
˚C
V
˚C
Notes:
1. Derate above 33˚C at 0.34 mA/˚C for HER.
2. Derate above 27˚C at 0.32 mA/˚C for Green.
3. Derate above 30˚C at 0.33 mA/˚C for Yellow.
4. Derate above 60˚C at 0.25 mA/˚C for AlGaAs.
Electrical/Optical Characteristics at TA = 25˚C
HER
Device
Series
HDSPParameter
301/303E Luminous Intensity/Segment
(Digit Average)
Forward Voltage/Segment
or DP
Peak Wavelength
Dominant Wavelength
Reverse Current
Thermal Resistance LED
Junction-to-Pin
Symbol
IV
Min.
1.251
Typ.
2.000
Max.
Units
mcd
Test Conditions
IF = 10 mA
VF
1.90
2.50
V
IF = 20 mA
λPEAK
λd
IR
RθJ–PIN
635
625
100
351.5
nm
IF = 20 mA
nm
IF = 20 mA
µA
VR = 5 V
˚C/W/Seg.
HER
Device
Series
HDSPParameter
561/563E Luminous Intensity/Segment
(Digit Average)
Forward Voltage/Segment
or DP
Peak Wavelength
Dominant Wavelength
Reverse Current
Thermal Resistance LED
Junction-to-Pin
5
Symbol
IV
Min.
2.001
Typ.
3.526
Max.
Units
mcd
Test Conditions
IF = 10 mA
VF
1.90
2.50
V
IF = 20 mA
λPEAK
λd
IR
RθJ–PIN
635
625
100
351.5
nm
IF = 20 mA
nm
IF = 20 mA
µA
VR = 5 V
˚C/W/Seg.
Green
Device
Series
HDSPParameter
301/303G Luminous Intensity/Segment
(digit average)
Forward Voltage/Segment
or DP
Peak Wavelength
Dominant Wavelength
Reverse Current
Thermal Resistance LED
Junction-to-Pin
Symbol
IV
Min.
2.001
Typ.
3.200
Max.
Units
mcd
Test Conditions
IF = 10 mA
VF
2.25
2.50
V
IF = 20 mA
λPEAK
λd
IR
RθJ–PIN
568
573
100
351.5
nm
IF = 20 mA
nm
IF = 20 mA
µA
VR = 5 V
˚C/W/Seg.
Green
Device
Series
HDSPParameter
561/563G Luminous Intensity/Segment
(Digit Average)
Forward Voltage/Segment
or DP
Peak Wavelength
Dominant Wavelength
Reverse Current
Thermal Resistance LED
Junction-to-Pin
Symbol
IV
Min.
3.201
Typ.
5.601
Max.
Units
mcd
Test Conditions
IF = 10 mA
VF
2.25
2.50
V
IF = 20 mA
λPEAK
λd
IR
RθJ–PIN
568
573
100
351.5
nm
IF = 20 mA
nm
IF = 20 mA
µA
VR = 5 V
˚C/W/Seg.
Yellow
Device
Series
HDSPParameter
301/303Y Luminous Intensity/Segment
(Digit Average)
Forward Voltage/Segment
or DP
Peak Wavelength
Dominant Wavelength
Reverse Current
Thermal Resistance LED
Junction-to-Pin
6
Symbol
IV
Min.
1.251
Typ.
2.000
Max.
Units
mcd
Test Conditions
IF = 10 mA
VF
2.15
2.50
V
IF = 20 mA
λPEAK
λd
IR
RθJ–PIN
589
590
100
351.5
nm
IF = 20 mA
nm
IF = 20 mA
µA
VR = 5 V
˚C/W/Seg.
Yellow
Device
Series
HDSPParameter
561/563Y Luminous Intensity/Segment
(Digit Average)
Forward Voltage/Segment
or DP
Peak Wavelength
Dominant Wavelength
Reverse Current
Thermal Resistance LED
Junction-to-Pin
Symbol
IV
Min.
2.00
Typ.
3.526
Max.
Units
mcd
Test Conditions
IF = 10 mA
VF
2.15
2.50
V
IF = 20 mA
λPEAK
λd
IR
RθJ–PIN
589
590
100
351.5
nm
IF = 20 mA
nm
IF = 20 mA
µA
VR = 5 V
˚C/W/Seg.
Notes:
1. Typical specification for reference only. Do not exceed absolute maximum ratings.
2. The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
AlGaAs
Device
Series
HDSPParameter
301/303A Luminous Intensity/Segment
(Digit Average)
Forward Voltage/Segment
or DP
Peak Wavelength
Dominant Wavelength
Reverse Current
Thermal Resistance LED
Junction-to-Pin
Symbol
IV
Min.
0.320
Typ.
0.505
Max.
Units
mcd
Test Conditions
IF = 1 mA
VF
1.80
2.20
V
IF = 20 mA
λPEAK
λd
IR
RθJ–PIN
660
643
100
351.5
nm
IF = 20 mA
nm
IF = 20 mA
µA
VR = 5 V
˚C/W/Seg.
AlGaAs
Device
Series
HDSPParameter
561/563A Luminous Intensity/Segment
(Digit Average)
Forward Voltage/Segment
or DP
Peak Wavelength
Dominant Wavelength
Reverse Current
Thermal Resistance LED
Junction-to-Pin
Symbol
IV
Min.
0.506
Typ.
0.878
Max.
Units
mcd
Test Conditions
IF = 1 mA
VF
1.80
2.20
V
IF = 20 mA
λPEAK
λd
IR
RθJ–PIN
660
643
100
351.5
nm
IF = 20 mA
nm
IF = 20 mA
µA
VR = 5 V
˚C/W/Seg.
Notes:
1. Typical specification for reference only. Do not exceed absolute maximum ratings.
2. The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
7
Intensity Bin Limits (mcd)
Green
Color Categories
HDSP-301G/303G/561G/563G
IV Bin Category
Min.
Max.
K
1.800
3.600
L
2.800
5.600
Color
Green
Yellow
Yellow
HDSP-301Y/303Y
IV Bin Category
Min.
I
1.100
K
1.800
Max.
2.200
3.600
Yellow
HDSP-561Y/563Y
IV Bin Category
Min.
K
1.800
L
2.800
Max.
3.600
5.600
HER
HDSP-301E/303E/561E/563E
IV Bin Category
Min.
Max.
I
1.100
2.200
K
1.800
3.600
AlGaAs Red
HDSP-301A/303A/561A/563A
IV Bin Category
Min.
Max.
F
0.280
0.560
G
0.450
0.900
8
Bin
3
4
2
3
Dominant Wavelength (nm)
Min.
Max.
570.00
574.50
567.00
571.50
586.50
590.00
584.00
587.50
Note:
1. All categories are established for classification of products.
Products may not be available in all categories. Please contact your
Agilent representatives for further clarification/information.
HER
30
YELLOW
25
GREEN
20
15
10
AlGaAs
5
0
0 10 20 30 40 50 60 70 80 90 100110120
TA – AMBIENT TEMPERATURE – °C
Figure 1. Maximum allowable DC current vs.
ambient temperature.
YELLOW
100
AlGaAs
80
HER
60
GREEN
40
20
0
0.0
1.0
2.0
3.0
4.0
5.0
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 5 mA FOR HER AND
YELLOW AND TO 1 AT 10 mA FOR GREEN)
35
120
12
10
8
YELLOW
HER
6
4
AlGaAs
2
GREEN
0
0
VF – FORWARD VOLTAGE – V
5
10
15
20
25
30
35
40
IF – DC FORWARD CURRENT – mA
Figure 2. Forward current vs. forward voltage.
Figure 3. Relative luminous intensity vs. DC
forward current.
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 5 mA FOR HER AND
YELLOW AND TO 1 AT 10 mA FOR GREEN)
RθJ = 770°C/W
40
IF – FORWARD CURRENT PER SEGMENT – mA
IDC – MAXIMUM DC CURRENT
PER SEGMENT – mA
45
IF – FORWARD CURRENT PER SEGMENT – mA
HDSP-301x/303x Series
HDSP-561x/563x Series
IDC – MAXIMUM DC CURRENT
PER SEGMENT – mA
45
RθJ = 770°C/W
40
35
HER
30
YELLOW
25
GREEN
20
15
10
AlGaAs
5
0
0 10 20 30 40 50 60 70 80 90 100110120
TA – AMBIENT TEMPERATURE – °C
120
YELLOW
100
AlGaAs
80
HER
60
GREEN
40
20
0
0.0
1.0
2.0
3.0
4.0
5.0
VF – FORWARD VOLTAGE – V
Figure 4. Maximum allowable DC current vs.
ambient temperature.
Figure 5. Forward current vs. forward voltage.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
trichloroethylene, carbon
tetrachloride, etc.) are not
recommended for cleaning LED
parts. All of these various
solvents attack or dissolve the
encapsulating epoxies used to
form the package of plastic LED
parts.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride,
9
For information on soldering
LEDs, please refer to Application
Note 1027.
12
10
8
HER
YELLOW
6
4
AlGaAs
2
GREEN
0
0
5
10
15
20
25
30
35
IF – DC FORWARD CURRENT – mA
Figure 6. Relative luminous intensity vs. DC
forward current.
40
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/
International), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Obsoletes 5980-2919EN
July 11, 2004
5988-4352EN
Similar pages