HP HDSP-331Y-IH000 7.62 mm (0.3 inch) general purpose seven-segment display Datasheet

Agilent HDSP-331x/332E/333x/334x Series
7.62 mm (0.3 inch) General Purpose
Seven-Segment Display
Data Sheet
Features
• Industry standard size
• Industry standard pinout
7.62 mm (0.4 inch) character height
DIP lead on 2.54 mm
• Choice of colors
High Efficiency Red (HER), Green,
AlGaAs Red, and Yellow
• Excellent appearance
Evenly lighted segments gray package gives optimum contrast
± 50° viewing angle
Description
This 7.62 mm (0.3 inch) LED
seven-segment display uses
industry standard size package
and pinout. The device is
available in either common anode
• Design flexibility
Common anode or common cathode
Single digit
Left and right hand decimal point
or common cathode. The choice
of colors includes High Efficiency
Red (HER), Green, AlGaAs Red,
and Yellow. The gray face
displays are suitable for indoor use.
• Categorized for luminous
intensity
Green and yellow categorized for
color
Applications
• Suitable for indoor use
• Not recommended for industrial
application, i.e., operating
temperature requirements
exceeding +85˚C or below –25˚C[1]
• Extreme temperature cycling not
recommended
Note:
1. For additional details, please contact your
local Agilent sales office or an authorized
distributor.
Devices
HER
HDSP-331E
Green
HDSP-331G
AlGaAs Red
HDSP-331A
Yellow
HDSP-331Y
HDSP-332E
HDSP-333E
HDSP-333G
HDSP-333A
HDSP-333Y
HDSP-334E
HDSP-334G
HDSP-334A
HDSP-334Y
Description
Common Anode, Right Hand and
Left Hand Decimal
Common Anode, Right Hand and Left
Hand Decimal without Pin 4, 5 and 12
Common Cathode, Right Hand
Decimal
Common Cathode, Right Hand Decimal
Package Drawing
A
A
B
C
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
A: AlGaAs Red
E: High Efficiency Red
G: Green
Y: Yellow
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
Refer to Respective Datasheet
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest
Agilent representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1
bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
2
Package Dimensions
Package Drawing A
TOP END VIEW
FRONT VIEW
COUNTRY
OF ORIGIN
10°
COLOR
BINNING
(NOTE 3)
PIN 1
0.50
(0.020)
19.00
(0.748)
HDSP-XXXX
YWW XZ COO
+
7.62
(10.300)
1.00
(0.039)
2– ∅1.1
(0.043)
0.90
(0.035)
5.20
(0.205)
2.54 x 6
(0.099)
LUMINOUS
INTENSITY
CATEGORY
DATE CODE
1.50
(0.059)
6.10
(0.240)
SIDE VIEW
10.10
(0.398)
A
F
G
E
L.DP
B
C
D
R.DP
0.30
(0.012)
3.88
(0.153)
7.62
(0.300)
NOTE: HDSP-332E DOES NOT HAVE
PIN 4, 5 AND 12.
3
DIMENSIONS IN MILLIMETERS (INCHES)
Package Dimensions
Package Drawing B
TOP END VIEW
FRONT VIEW
COUNTRY
OF ORIGIN
10°
COLOR
BINNING
(NOTE 3)
PIN 1
0.50
(0.020)
19.00
(0.748)
HDSP-XXXX
YWW XZ COO
+
7.62
(10.300)
1.00
(0.039)
2– ∅1.1
(0.043)
0.90
(0.035)
5.20
(0.205)
2.54 x 6
(0.099)
LUMINOUS
INTENSITY
CATEGORY
DATE CODE
1.50
(0.059)
6.10
(0.240)
SIDE VIEW
10.10
(0.398)
A
F
G
E
B
C
D
R.DP
0.30
(0.012)
3.88
(0.153)
4
7.62
(0.300)
DIMENSIONS IN MILLIMETERS (INCHES)
Package Dimensions
Package Drawing C
TOP END VIEW
FRONT VIEW
COUNTRY
OF ORIGIN
10°
COLOR
BINNING
(NOTE 3)
PIN 1
0.50
(0.020)
19.00
(0.748)
HDSP-XXXX
YWW XZ COO
+
7.62
(10.300)
1.00
(0.039)
2– ∅1.1
(0.043)
0.90
(0.035)
5.20
(0.205)
2.54 x 6
(0.099)
LUMINOUS
INTENSITY
CATEGORY
DATE CODE
1.50
(0.059)
6.10
(0.240)
SIDE VIEW
10.10
(0.398)
A
F
G
E
B
C
D
R.DP
0.30
(0.012)
3.88
(0.153)
5
7.62
(0.300)
DIMENSIONS IN MILLIMETERS (INCHES)
Internal Circuit Diagram
Common Anode
HDSP-331E/331G/331Y/331A/332E
3.14 COM
L.DP
6
A
1
B
13
C
10
D
8
E
7
F
2
PIN N0.
CONNECTION
1
CATHODE A
G R.DP
11
9
2
CATHODE F
3
COMMON ANODE
6
CATHODE L.DP
7
CATHODE E
8
CATHODE D
9
CATHODE R.DP
10
CATHODE C
11
CATHODE G
13
CATHODE B
14
COMMON ANODE
PINS 4, 5, 12: NO CONNECTION FOR
HDSP-331E/331G/331Y/331A
AND NO PIN FOR HDSP-332E
Common Cathode
HDSP-333E/333G/333Y/333A
PIN NO.
4.12 COM
A
14
B
13
C
8
D
7
E
6
F
1
G
2
DP
9
CONNECTION
1
ANODE F
2
ANODE G
4
COMMON CATHODE
6
ANODE E
7
ANODE D
8
ANODE C
9
ANODE DP
12
COMMON CATHODE
13
ANODE B
14
ANODE A
PINS 3, 5, 10, 11: NC
6
Internal Circuit Diagram
Common Cathode
HDSP-334E/334G/334Y/334A
1.6 COM
A
10
B
9
C
8
D
5
E
2
F
4
G
3
DP
7
PIN NO.
CONNECTION
1
COMMON CATHODE
2
ANODE E
3
ANODE G
4
ANODE F
5
ANODE D
6
COMMON CATHODE
7
ANODE DP
8
ANODE C
9
ANODE B
10
ANODE A
PINS 11, 12, 13, 14: NC
7
Absolute Maximum Ratings at TA = 25˚C
Description
Power Dissipation Segment
Forward Current Segment
Peak Forward Current per Segment
(1/10 Duty Factor at 10 kHz)
Operating Temperature Range
Storage Temperature Range
Reverse Voltage per Segment or DP
Wave Soldering Temperature for 3 Seconds
(at 2 mm Distance from the Body)
HER
HDSP-33xE
65
25[1]
100
Green
HDSP-33xG
65
25[2]
100
AlGaAs Red
HDSP-33xA
30
15[3]
80
Yellow
HDSP-33xY
52
20[4]
80
Units
mW
mA
mA
–35 to +85
–35 to +85
5
250
–35 to +85
–35 to +85
5
250
–35 to +85
–35 to +85
5
250
–35 to +85
–35 to +85
5
250
˚C
˚C
V
˚C
Notes:
1. Derate above 25˚C at 0.33 mA/˚C.
2. Derate above 25˚C at 0.33 mA/˚C.
3. Derate above 25˚C at 0.2 mA/˚C.
4. Derate above 25˚C at 0.27 mA/˚C.
Electrical/Optical Characteristics at TA = 25˚C
High Efficiency Red (HER)
Devices
HDSP-
331E
332E
333E
334E
Parameter
Luminous Intensity/Segment
Symbol
IV
Forward Voltage
Peak Wavelength
Dominant Wavelength
Reverse Voltage
VF
λPEAK
λd
VR
Parameter
Luminous Intensity/Segment
Forward Voltage
Symbol
IV
VF
Min.
0.8
Typ.
1.15
1.80
2.05
635
620
Max.
2.40
5
Units
mcd
mcd
V
nm
nm
V
Test Conditions
IF = 5 mA
IF = 10 mA
IF = 20 mA
Units
mcd
V
V
nm
nm
V
Test Conditions
IF = 10 mA
IF = 10 mA
IF = 20 mA
IR = 100 µA
Green
Devices
HDSP-
331G
333G
334G
8
Min.
0.8
1.80
Peak Wavelength
Dominant Wavelength
Reverse Voltage
λPEAK
λd
VR
5
Typ.
2.00
2.07
2.25
568
573
Max.
2.60
IR = 100 µA
AlGaAs Red
Devices
HDSP-
Parameter
Luminous Intensity/Segment
Symbol
IV
Min.
2.001
331A
333A
334A
Forward Voltage
Peak Wavelength
Dominant Wavelength
Reverse Voltage
VF
λPEAK
λd
VR
Parameter
Luminous Intensity/Segment
Symbol
IV
Forward Voltage
Peak Wavelength
Dominant Wavelength
Reverse Voltage
VF
λPEAK
λd
VR
Typ.
3.93
4.20
1.85
660
643
Max.
2.00
5
Units
mcd
mcd
V
nm
nm
V
Test Conditions
IF = 5 mA
IF = 10 mA
IF = 20 mA
Test Conditions
IF = 5 mA
IF = 10 mA
IF = 20 mA
IR = 100 µA
Yellow
Devices
HDSP-
Min.
0.80
331Y
333Y
334Y
Typ.
0.71
1.50
Max.
Units
mcd
mcd
2.15
595
590
2.60
V
nm
nm
V
5
Intensity Bin Limits (mcd at 10 mA)
Bin Name
G
H
I
J
K
HER/Green/Yellow
Min.[1]
Max.[1]
0.801
1.250
1.251
2.000
2.001
3.200
NA
NA
NA
NA
AlGaAs Red
Min.[1]
NA
NA
2.001
3.201
5.051
Max.[1]
NA
NA
3.200
5.050
8.000
Note:
1. Tolerance for each bin limit is ± 10%.
Color Bin Limits (nm at 10 mA)
Color
Green
Yellow
Bin
3
4
5
1
2
3
Dominant Wavelength (nm)
Min.[1]
Max.[1]
569.1
571.0
571.1
573.0
573.1
575.0
585.5
588.5
588.5
591.5
591.5
594.5
Note:
1. Tolerance for each bin limit is 1 nm.
9
IR = 100 µA
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
High Efficiency Red (HER)
30
HIGH EFFICIENCY RED (HER)
25
20
15
10
5
0
0
20
40
60
80
100
120
100
80
60
40
20
0
0
0.5
Figure 1. Maximum allowable average or DC
current vs. ambient temperature.
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 10 mA)
2.0
2.5
3.0
3.5
1.4
2.0
1.5
1.0
0.5
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5
10
15
20
25
30
35
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 3. Relative luminous intensity vs. DC
forward current.
10
1.5
Figure 2. Forward current vs. forward voltage.
2.5
0
1.0
VF – FORWARD VOLTAGE – V
TA – AMBIENT TEMPERATURE – °C
0
5
10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 4. Relative efficiency (luminous
intensity per unit current) vs. peak current.
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
Green
30
GAP GREEN
25
20
15
10
5
0
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE – °C
120
100
80
60
40
20
1.2
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZEDTO 1 AT 10 mA)
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Figure 6. Forward current vs. forward voltage.
3.0
2.5
2.0
1.5
1.0
0.5
0
5
10
15
20
25
30
35
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 7. Relative luminous intensity vs. DC
forward current.
11
0
VF – FORWARD VOLTAGE – V
Figure 5. Maximum allowable average or DC
current vs. ambient temperature.
0
0
1.0
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 8. Relative efficiency (luminous
intensity per unit current) vs. peak current.
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
AlGaAs Red
16
AIGaAs RED
14
12
10
8
6
4
2
0
0
20
40
60
80
100
120
100
80
60
40
20
0
0
0.5
TA – AMBIENT TEMPERATURE – °C
Figure 9. Maximum allowable average or DC
current vs. ambient temperature.
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 10 mA)
2.0
2.5
1.2
2.5
2.0
1.5
1.0
0.5
0
5
10
15
20
25
30
35
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 11. Relative luminous intensity vs. DC
forward current.
12
1.5
Figure 10. Forward current vs. forward voltage.
3.0
0
1.0
VF – FORWARD VOLTAGE – V
1.0
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 12. Relative efficiency (luminous
intensity per unit current) vs. peak current.
25
YELLOW
20
15
10
5
0
0
20
40
60
80
100
IF – FORWARD CURRENT PER SEGMENT – mA
MAXIMUM DC CURRENT PER SEGMENT – mA
Yellow
120
100
80
60
40
20
0
0
0.5
TA – AMBIENT TEMPERATURE – °C
Figure 13. Maximum allowable average or DC
current vs. ambient temperature.
2.0
2.5
3.0
3.5
1.4
RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZEDTO 1 AT 10 mA)
1.5
Figure 14. Forward current vs. forward voltage.
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
0
5
10
15
20
25
30
35
IF – FORWARD CURRENT FOR SEGMENT – mA
Figure 15. Relative luminous intensity vs. DC
forward current.
13
1.0
VF – FORWARD VOLTAGE – V
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5 10 15 20 25 30 35 40 45 50
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 16. Relative efficiency (luminous
intensity per unit current) vs. peak current.
www.agilent.com/semiconductors
For product information and a complete list
of distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755
1939
Japan: (+81 3) 3335-8152(Domestic/
International), or 0120-61-1280(Domestic
Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Obsoletes 5988-2971EN
July 17, 2004
5988-9421EN
Similar pages