Emerson Network Power HDVDP Trompeter patch-jack sery Datasheet

Trompeter
Patch-Jack Series
Connectivity for
Business Critical Continuity
HDVDP & HDVDPM
Emerson Network Power Connectivity Solutions offers
Key Features & Benefits
Trompeter’s HDVDP and HDVDPM Patch Jacks designed and
engineered to exceed SMPTE 292M specifications for high definition
video transmission and connectivity.
■
The normal-thru contact interface design of HDVDP/HDVDPM consists of a self-aligning normal-thru U-slot, two redundant points of
contact, an independent applied normal force at each contact point,
and a mechanical wipe region at each contact interface location.
These design attributes provide reliable and repeatable patching/
un-patching, resulting in low-level contact resistance
stability. Samples and information can be obtained by contacting
Trompeter’s customer service department at:
800.247.8256, or through the website at
www.EmersonConnectivity.com
■
High-reliability normal-thru contact design
■
Self wiping normal thru contact
■
Streamlined design for repeatable
Lightweight design:
HDVDPT (full size): 47.8 grams
HDVDPMT (mini) 34.2 grams
manufacturability
Connectivity for
Business Critical Continuity
SMPTE Requirements
Parameter
HD (SMPTE 292)
SD (SMPTE 259)
Comments
Coaxial Cable
Coaxial Cable
75 ohm, low loss, double shielded
BNC
BNC
75 ohm version
Cable Length
80 meters
300 meters
Depending on cable type
Bit Rate
1.485 Gbps
270 Mbps
145.5 MHz word clock x 10
27 MHz work clock x 10
-15dB or better @ 5MHz to 1.485 GHz
-15dB or better @ 5MHz to 1.485 GHz
Nominal into 75 ohm termination
800 mV P-P +/- 10%
800 mV P-P +/- 10%
Nominal into 75 ohm termination
<0.2 UI or <134.68 pS
<0.2 UI or <134.68 pS
HD UI = 673.4 pS
SD UI = 3.7 nS
0.0 V +/- 0.5 V
0.0 V +/- 0.5 V
Nominal at mid-amplitude
<270 pS, <100pS diff.
<270 pS, <100pS diff.
20% - 80%
Connection Medium
Connector Type
Return Loss
Voltage Levels
Jitter
DC Offset
Rise/Fall Times
HDVDP/HDVDPM Performance vs. SMPTE 292 Requirements
Parameter
Return Loss (S1,1)
SMPTE 292 M
HDVDPMT (mini)
HDVDPT (full size)
-15 dB or better @ 5 MHz to 1.485 GHz
S1, 1 <-26 dB
S1, 1 <-26 dB
Voltage Levels
Jitter
Rise/Fall Times
800 mV P-P +/- 10%
760 mV
760 mV
<0.2 UI or <134.68 pS @ 1.485 Gbps
.082 UI or 55 pS
.082 UI or 55 pS
<270 pS, ∆RFT <100 pS @ 1.485 Gbps
RT = 220 pS
FT = 200 pS
∆RFT = 30 pS
RT = 220 pS
FT = 200 pS
∆RFT = 30 pS
Typical Time-Domain Eye Pattern
Full Size and Mini Patch-Jacks
(Jitter and Rise time measures shown in table)
Part Number
EmersonNetwork Power Connectivity Solutions
299 Johnson Avenue SW
Ste 100
Waseca,MN 56093 USA
507.833.8822 or 800.247.8256
www.EmersonConnectivity.com
Description
HDVDPT
Full-size WECo format, terminated
HDVDP
Full-size WECo format, non terminated
HDVDPMT
mini WECo format, terminated
HDVDPM
mini WECo format, non-terminated
HDVDPN
Fill-size WECo format, non terminated
HDVDPMN
mini WECo format, non-terminated
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2011 Emerson Electric Co.
TR.1052.08
Similar pages