Rectron HFM104L Surface mount glass passivated high efficiency silicon rectifier voltage range 50 to 1000 volts current 1.0 ampere Datasheet

HFM101L
THRU
HFM108L
SURFACE MOUNT GLASS PASSIVATED
HIGH EFFICIENCY SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
FEATURES
*
*
*
*
*
*
Glass passivated device
Ideal for surface mounted applications
Low leakage current
Metallurgically bonded construction
Mounting position: Any
Weight: 0.057 gram
SMAL
0.067 (1.70 )
0.051 (1.29 )
MECHANICAL DATA
0.110 ( 2.79 )
0.086 ( 2.18 )
* Epoxy: Device has UL flammability classification 94V-O
0.180 ( 4.57 )
0.160 ( 4.06 )
0.012 ( 0.305 )
0.006 ( 0.152 )
0.067 ( 1.70 )
0.063 ( 1.60 )
0.059 ( 1.50 )
0.035 ( 0.89 )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
0.008 ( 0.203 )
0.004 ( 0.102 )
Ratings at 25 o C ambient temperature unless otherwise specified.
0.209 ( 5.31 )
0.185 ( 4.70 )
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
SYMBOL HFM101L HFM102L HFM103L HFM104L HFM105L
RATINGS
HFM106L
HFM107L HFM108L UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
300
400
600
800
1000
Maximum RMS Voltage
VRMS
35
70
140
210
280
420
490
700
Volts
VDC
50
100
200
300
400
600
800
1000
Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at T A = 50 OC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Volts
IO
1.0
Amps
I FSM
30
Amps
Typical Thermal Resistance (Note 1)
RqJL
27
0
C/W
Typical Thermal Resistance (Note 1)
RqJA
75
0
C/W
Typical Junction Capacitance (Note 2)
CJ
Operating Temperature Range
TJ
150
0
C
T STG
-55 to + 150
0
C
Storage Temperature Range
15
12
pF
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 1.0A DC
Maximum Full Load Reverse Current, Full
cycle Average T A =55 OC
Maximum Average Reverse Current
@T A = 25 o C
at Rated DC Blocking Voltage
@T A = 125 o C
Maximum Reverse Recovery Time (Note 4)
SYMBOL HFM101L HFM102L HFM103L HFM104L HFM105L
VF
1.0
1.3
IR
HFM106L
HFM107L HFM108L UNITS
1.7
50
mA
2
mA
100
trr
NOTES : 1. Thermal Resistance : Mounted on PCB.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
4. Test Conditions: IF= 0.5A, IR= -1.0A, IRR= -0.25A.
50
Volts
mA
75
nSec
2006-12
RATING AND CHARACTERISTICS CURVES ( HFM101L THRU HFM108L )
50 W
NONINDUCTIVE
(+)
25 Vdc
(approx)
(-)
(-)
D.U.T
PULSE
GENERATOR
(NOTE 2)
1
NONINDUCTIVE
trr
+0.5A
10 W
NONINDUCTIVE
OSCILLOSCOPE
(NOTE 1)
0
-0.25A
(+)
NOTES: 1 Rise Time = 7ns max. Input Impedance =
1 megohm. 22pF.
-1.0A
2. Rise Time = 10ns max. Source Impedance =
50 ohms.
1cm
SET TIME BASE FOR 50/100 ns/cm
AVERAGE FORWARD CURRENT, (A)
1.0
0.8
0.6
0.4
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
0.2
0
0
25
50
75
100
125
150
AMBIENT TEMPERATURE, (OC)
FIG.2 TYPICAL FORWARD CURRENT
DERATING CURVE
175
INSTANTANEOUS REVERSE CURRENT, (mA)
FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
1000
100
TA = 125 OC
TA = 75 OC
10
TA = 25 OC
1.0
0.1
0
20
40
60
80
100
120
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.3 TYPICAL REVERSE
CHARACTERISTICS
140
PEAK FORWARD SURGE CURRENT, (A)
20
10
TJ = 25 OC
3.0
HFM106L~HFM108L
1.0
0.3
HFM104L~HFM105L
0.1
HFM101L~HFM103L
0.03
0.01
Pulse Width=300uS
1% Duty Cycle
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
200
8.3ms Single Half Sine-Wave
(JEDED Method)
150
125
100
50
30
20
10
1
5
INSTANTANEOUS FORWARD VOLTAGE, (V)
10
TJ = 25 OC
100
60
HFM101L~HFM105L
20
10
6
4
HFM106L~HFM108L
2
1
0.1 0.2
100
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
200
40
50
NUMBER OF CYCLES AT 60Hz
FIG.4 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
JUNCTION CAPACITANCE, (pF)
INSTANTANEOUS FORWARD CURRENT, (A)
RATING AND CHARACTERISTICS CURVES ( HFM101L THRU HFM108L )
0.4
1.0
2
4
10
20
40
REVERSE VOLTAGE, (V)
FIG.6 TYPICAL JUNCTION CAPACITANCE
100
Mounting Pad Layout
0.094 MAX.
(2.38 MAX.)
0.060MIN.
( 1.52 MIN.)
0.052 MAX.
(1.32 MAX.)
0.220
(5.58) REF
Dimensions in inches and (millimeters)
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
Similar pages