YENYO HFR12A06 Glass passivated hyper fast recovery rectifier Datasheet

HFR12A06
Glass Passivated Hyper Fast Recovery Rectifier
Voltage Range 600 V
Current 12.0 Ampere
Features
 Fast switching for high efficiency
 Low noise
 Low reverse leakage current
 High voltage super FRD
 PFC application
TO-220AC
.057(1.45)
.052(1.33)
Mechanical Data
 Case: Molded plastic TO-220AC
 Epoxy: UL 94V-0 rate flame retardant ,
 Terminals: Solderable per MIL-STD-202
method 208
 Mounting position: Any
 Weight: 2.07 grams
MAX.412(10.5)
.638(16.2)
.602(15.3)
PIN
1
2
MAX.07(1.7)
.056(1.43)
.048(1.22)
.185(4.70)
.175(4.44)
.072(1.82)
.062(1.58)
.037(0.94)
.027(0.68)
.055(1.40)
.045(1.14)
.27(6.86)
.23(5.84)
.154(3.91)
DIA .137(3.50)
.128(3.25)
.114(2.90)
YENYO
.526(13.35)
.508(12.90)
.102(2.60)
.088(2.25)
.025(0.64)
.014(0.35)
.205(5.20)
.195(4.95)
1
2
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
CHARACTERISTIC
HFR12A06
SYMBOL
Min.
Typ.
Max.
UNIT
Recurrent Peak Reverse Voltage
VRRM
-
-
600
V
RMS Voltage
VRMS
-
-
420
V
VDC
-
-
600
V
IF(AV)
-
-
10.0
A
IFSM
-
-
110
A
VF
-
-
2.4
V
IR
-
-
10.0
uA
500
uA
Maximum Reverse Recovery Time (Note 1)
Trr
-
-
25
nS
Typical junction Capacitance (Note 2)
CJ
-
70
-
DC Blocking Voltage
Average Forward Rectified
o
Current TC=100 C
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load
(JEDEC method)
Instantaneous Forward Voltage
@ 12.0 A
o
DC Reverse Current @TJ=25 C
o
At Rated DC Blocking Voltage @TJ=150 C
Typical Thermal Resistance (Note 3)
Operating Junction and Storage
Temperature Range
R JC
-
3.3
-
TJ, TSTG
-65
-
175
pF
o
CW
o
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
1/2
R3,JUN-11
C
RATINGS AND CHARACTERISTIC CURVES HFR12A06
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
FIG.1 - FORWARD CURRENT DERATING CURVE
120
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
12.0
9.0
6.0
3.0
60 Hz Resistive or
Inductive load
0
Pulse Width 8.3ms
Single Half-Sire-Wave
(JEDEC Method)
90
60
30
0
0
25
75
50
100
125
150
175
1
100
NUMBER OF CYCLES AT 60Hz
o
CASE TEMPERATURE, C
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
100
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
1000
o
TJ=150 C
10
o
TJ=25 C
1.0
0.1
0
1
2
3
o
TJ=150 C
100
10
o
TJ=25 C
1
0.1
0
4
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
FIG.5 - TYPICAL JUNCTION CAPACITANCE
1000
JUNCTION CAPACITANCE, pF
IINSTANTANEOUS FORWARD CURRENT,
AMPERES
10
o
TJ = 25 C
f = 1.0 MHZ
Vsig = 50mVp-p
100
10
0.1
1.0
4.0
10
100
REVERSE VOLTAGE, VOLTS
YENYO TECHNOLOGY CO., LTD.
2/2
R3,JUN-11
Similar pages